片语

angular r contact斜角接触

triple angular-contact ball bearings三联角接触球轴承

angular process contact突起角度接触

angular r contact ball bearing向心止推滚珠轴承

angular-contact articulated bearing角接触关节轴承

High speed angular-contact ball bearing高速角接触球轴承

angular contact bull bearing角面接触滚珠轴承

英汉例句

• Single and double deep groove ball bearings single and double angular contact ball bearings and various non-standard bearings.

  单双列深沟球轴承，单双列角接触轴承及各种非标轴承。

• This article explains mainly installation form of angular contact ball bearing and its axial backlash influence in practical application, and introduces the corresponding counter-measure.

  本文主要阐述了角接触轴承的安装形式及其轴向游隙在实际应用中的影响，并介绍了相应的应对措施。

• NKE single row angular contact ball bearings of the series 72 and 73 are produced to normal tolerance class (PN) as standard.

  NKE的单列角接触球72和73系列轴承生产正常糖耐量类（PN）作为标準。

• Design calculating method of grooved raceway diameter of angular contact ball boring is introduced, and the related calculating formula is given.

  介绍了角接触球轴承沟道直径的设计计算方法，并给出了相关的计算式。

• Under such conditions the balls contact the inner and outer rings only at one point, as in an axially loaded single-row angular contact ball bearing.

  在这种情况下接触球只在某个时候，内圈和外圈，作为一个受压单列角接触球轴承。

• The axial fixed position preload is applied to middle ring of the shaft, the axial rigidity of the angular contact ball bearing is obtained by the impulse excitation tests.

  对转台中环主轴施加轴向定位预紧力，通过脉沖激励法试验得到角接触球轴承的轴向刚度，试验结果与理论结果吻合较好，为转台研制中各轴系预紧量的控制提供了理论和实验依据。

• Double row angular contact ball bearing.

  角面接触双排滚珠轴承。

• An analysis of a type of angular contact ball bearing under given input power spectrum density is performed. The result demonstrate that the bearing is safe in any load direction.

  以某种角接触球轴承为例，验证了其在给定输入功率谱密度下任意方向加载都安全。

• FAG single row angular contact ball bearings of series 72b and 73b have a contact Angle of 40. They can therefore accomodate high axial loads.

  FAG单列角接触球轴承72b和73B系列有一个40度的接触角，因此它们能够提供较高的径向载荷。

• Due to their contact Angle, single-row angular contact ball bearings are better suited to sustaining high axial loads than deep-groove ball bearings.

  由于其接触角，单列角接触球轴承比深沟球轴承更适合维持高轴向负荷。

• For the tolerance of angular contact ball bearings see radial bearings, page 56.

  角接触球轴承公差见径向轴承，第56页。

• Rolling bearings. single - row angular contact ball bearings. chamfer dimensions for outer ring non - thrust side.

  滚动轴承。单列角面接触的球轴承。外圈非推力边的倒圆角尺寸。

• FAG angular contact ball bearings are heat-treated in such a way that they can be used at operating temperatures of up to 150.

  FAG角接触球轴承经过热处理，能够在高达150摄氏度的温度下运行。

• DB combinations, DF combinations and four-point contact, double row angular contact ball bearings can withstand radial and bi-axial load.

  DB组合，DF组合及四点接触、双列角接触球轴承可承受径向和双向轴向负荷。

• For tolerances of angular contact ball bearings of universal design, see radial bearings on page 56.

  通用设计的角接触球轴承的公差可参考第56页上的径向轴承。

• Most of gyroscope bearings are precious angular contact ball bearings, the precision and life of gyroscope is dependant on the performance of bearing.

  陀螺马达轴承大部分是精密角接触球轴承，轴承的性能决定着陀螺马达的寿命和精度。

• The structure and functions of double row angular contact ball bearings for electromagnetic clutch in air-conditioner will directly influence the performance of the compressor.

  汽车空调器是汽车上的重要辅助设备之一，汽车空调电磁离合器用双列角接触球轴承结构与性能的好坏，直接影响汽车空调压缩机的性能。

• On the single row angular contact bearings, radial load rating of bearing rings relative to each other purely radial displacement of the load of the radial component.

  对单列角接触轴承，径向额定负荷为引起轴承套圈彼此相对纯径向位移的负荷的径向分量。

• The types and working principle of preload of the angular contact ball bearings are introduced, the selection rules of the preload and calculation method of determining preload force are given.

  介绍角接触球轴承预紧的类型及工作原理，给出了预紧选择原则和确定预紧力的计算方法。

• To meet the requirements of different applications, thin wall bearings including radial, outer raceway faults, angular contact and full equipment, and other configurations and features.

  为满足不同的应用需求，薄壁轴承包括径向、断裂外滚道、角接触以及满装等多种配置和特性。

• Single row angular contact ball bearings in a tandem arrangement are used when the actual thrust force exceeds the thrust load capacity of a single angular contact ball bearing.

  单列角接触球轴承在串联布置时所使用的实际推力超过一个单一的角接触球轴承推力负荷能力。

• Single row angular contact ball bearings of the series 72 and 73 with a contact Angle of 40deg (suffix b) are regularly used in the general machinery industry.

  系列72和7340deg(后缀b)的接触角的单列角接触球轴承是经常使用的通用机械行业。

• Larger double-row angular contact ball bearings have a filling slot (Figure 1.15c and) on one side and a machined brass cage or a pressed sheet-steel waved-ribbon cage per ball set.

  较大的双列角接触球轴承有一个填充槽(图1.15c和d)为一方，一机加工黄铜保持架或压片钢挥舞着每球丝带笼集。

• When angular contact thrust ball bearings operate at high speeds, the centrifugal forces and gyratory moments acting on the balls may cause them to slide on the raceways.

  角接触推力球轴承在高速运转时，作用在球上的离心力和旋转力矩可能会导致钢球在滚道内滑动。

• FST production of various series of angular contact ball bearings, rolling mill also produced a four-point contact ball bearings and machine tools combined angular contact ball bearings.

  FST生产各种系列的角接触球轴承，同时还生产轧机用四点接触球轴承及机床用组合角接触球轴承。