片语

shearing force bolt connection剪力螺栓连接

high strength bolt connection高强度螺栓连接

bolt joint螺栓接合，螺栓连接

bolt connection type fuse螺栓连接式熔断体

tight bolt connection紧螺栓联接

bolt connection joint栓接节点

unadjustable bolt connection style螺接固定式

bolt and nail connection螺栓及钉结合

hydraulic bolt connection[机]

bolt fastening[机] 螺栓连接

英汉例句

• In this paper presents optimum design of flange bolt connection with constraint of strength reliability.

  本文以强度可靠度为约束，对法兰螺栓联接进行了优化设计。

• By the practical engineering, authors show the quality influence factors and control measures of high-strength bolt connection in steel structure.

  通过工程实例，介绍了钢结构中高强度螺栓连接的质量影响因素及控制措施。

• The contact finite element method is used in present paper to analyze stress of bolt connection structure.

  应用接触有限元方法，对螺栓联接结构进行了应力分析。

• This paper discusses the application of calculation formulas of high-strength bolt connection in slip-critical type under the action of both shearing force and axial force.

  讨论了摩擦型高强度螺栓连接在同时承受剪力和拉力时的计算公式及应用。

• Moreover, in this paper we analyse the initial failure of bolt connection in gear couplings.

  文中对齿轮联轴器的连接螺栓的早期失效进行了分析。

• A whole building adopts bolt connection or splicing modes so that the building body is smooth and beautiful and is convenient to mount and dismount.

  整栋房均采用螺栓连接或插接方式，房体平整美观，安装拆装方便。

• In the connection design of steel structure, the shear plate with high-strength bolt connection is extensively used at the flexible joint where the beam is connected to the weak axis of the column.

  钢结构节点设计中，梁与柱弱轴方向的柔性连接常采用剪力板高强螺栓连接，螺栓群所承受的荷载有竖向力和偏心力矩。

• Compared with the traditional methods, such as embedded fixation, hole casting, bolt connection and welding, Haihang nail fastening technology has many advantages.

  海行射钉紧固技术与传统的预埋固定，打洞浇注，螺栓连接及焊接等方法相比，具有许多优越性。

• A simple structure with a bolt connection is used to calculate and test the results of the same method.

  对具有螺栓连接的简单结构，采用同样计算方法，比对计算和试验验证结果。

• Stainless steel plate ends with thin clamped and joint bolts, at last we use such fixation, bolt connection adjust tension bridle degrees.

  不锈钢板两端接头用薄板夹住并用螺栓加以固定，最后用螺栓连接，调节涨紧度。

• Results the low order mode of the 4 kinds of bolt connection processing method is the same, but the natural frequency is different.

  结果4种螺栓连接处理方法得到的低阶振型一致，但固有频率有所区别。

• Simply and easy method named check table method in design of tightened bolt connection with uncontrolled tightened force is presented.

  针对不控制预紧力的紧螺栓联接设计计算时需采用试算法的问题，提出一种无需试算的新方法即查表法。

• The force and deformation of bolt connection with elastic cell fixed under a nut are analyzed.

  现有文献称「在螺母下面安装弹性元件，起到了柔性螺栓的效果」。

• Reliable references are provided for simplified computation of bolt connection from complex structure.

  为复杂结构中螺栓连接的简化计算提供了可靠参考依据。

• Reaming bolt connection part, should be in accordance with the provisions of the tolerance hole, in the hinge hole bolt connection, can't change.

  铰制孔螺栓连接部分，应按图样规定的公差铰孔后，在用铰制孔用螺栓连接，不能随意更改。

• Abstr: Objective To provide a method of bolt connection processing for a space product, which is a complex structure with multi-bolts at design stage.

  文章摘要：目的为具有多螺栓连接复杂结构、处于在研阶段的某航天产品提供螺栓连接处理方法。

• By using the concept of equivalent reliability, the reliability design of bolt connection can be simpler and more feasible with scientifically reasonable calculation.

  采用「当量可靠度」概念进行螺栓联接的可靠性设计简便可行，使得螺栓联接的可靠性计算更加科学合理。

• Stress relaxation should be taken into consideration while designing tight bolt connection under a high temperature. The paper discusses the calculation thought and solution about stress relaxation.

  在高温环境下有紧密性要求的螺栓联接，在设计时应考虑应力松弛。讨论了关于应力松驰问题的计算思路和解决方法。

• Sun Valley of Expo Axis applies free-form design idea, which is reticulated shell structure with bolt connection joint.

  上海世博会世博轴阳光谷采用自由形态设计理念，是一种采用栓接节点的网壳结构。

• This paper analyses the special points and mechanism of bolt connection mode on type HXD1 locomotive traction base, and shows the effect of bush to bolt application reliability by stress calculation.

  分析HXD1型机车牵引座的螺栓连接方式中的特殊点及其机理，并通过受力计算说明了衬套对螺栓使用可靠性的影响。

• This paper discusses the application of calculation formulas of high strength bolt connection in bearing type under the action of both shearing force and axial tensile force.

  本文讨论了承压型高强度螺栓连接在同时承受剪力和桿轴方向拉力时其计算公式的应用。

• The additional bending moment results in the pulling state of rear back rod of the mast and the conventional bolt connection seems to be very weak.

  附加弯矩导致桅桿的后背主弦桿受拉，传统的螺栓连接方法显得薄弱。