英汉例句

• the continuous casting slab surface quality prediction expert system is an expert system that is developed on the basis of the relating research in our country and abroad.

  连铸板坯表面质量预报专家系统是在分析国内外相关研究的基础上开发的专家系统。

• there are some longitudinal surface cracks appear on the continuous casting slab and consequently on the rolling steel plate.

  在连铸轧制的钢板表面有沿轧制方向的裂纹。

• the length measurement and cutting control of continuous casting slab are important units in continuous casting production process. contact measurement method is used in the most current systems;

  在炼钢连铸生产工艺流程中，连铸坯的在线长度检测和定长切割是其中的重要环节。

• this research uses rough sets to reduce this factors , then adopts radial basis function networks to predict and diagnose the continuous casting slab defect .

  提出用粗糙集理论简化这些因素，然后采用径向基函数网络对连铸板坯缺陷进行预报诊断。

• the transverse crack is one of the most serious defects in the continuous casting slab and it has much greater adverse influence on the quality of the cc slab.

  铸坯上的横裂纹是连铸板坯上较严重的缺陷之一，对铸坯质量影响较大。

• the quality of continuous casting slab not only restricts the production of continuous caster, but also affects the productivity of the rolling mill and the quality of final products.

  连铸坯的质量不仅制约着连铸机的生产，也影响着轧机的生产率和最终产品质量。

• this paper studies the problem of surface inclusions and cracks of continuous casting slab at maanshan steel and puts forward corresponding measures to solve the problem.

  针对柳钢中板表面夹杂物缺陷的特点，分析了夹杂物的来源和保护渣性能、形态对夹杂物的影响。

• a tri-dimensional flow field and temperature field of molten steel in continuous casting slab mold were calculated by means of commercial phoenics software.

  用phoeni cs软件计算了板坯结晶器内流体的三维流场和温度场。

• heat transfer mathematical model and bp networks prediction model during solidification of continuous casting slab are established and verified with the measured data.

  建立了连铸坯凝固过程传热数学模型与bp网络预测模型，并根据实测数据对两种模型分别进行了验证。

• hot delivery and hot charging technology of continuous casting slab includes two technologies: hot delivery and hot charging rolling, and direct charging rolling.

  连铸坯热送热装工艺分为热送装炉轧制和直接装炉轧制两种。

• the method and results of the study on formation condition for internal crack in continuous casting slab were reviewed.

  评述了连铸坯内裂纹形成条件的研究方法和结果。

• according to the steel-making equipment and actual technologic condition, a special measure has been taken to improve the continuous casting slab quality.

  根据实际工艺条件，采取针对性的改善措施后，板卷表裂缺陷得以有效控制。

• producing continuous casting slab without defect is precondition to hot delivery and charging continuous casting slab.

  生产无缺陷的连铸坯是连铸坯热送、热装的前提条件。

• based on image processing the theory, hardware and software of the length measurement and control system in the untouched length continuous casting slab system are introduced.

  介绍了基于图像处理的无接触式连铸板坯测长系统的工作原理、硬件构成和软件编程。

• hot delivery and hot charging technology of continuous casting slab includes two technologies: hot delivery and hot charging rolling, and direct charging rolling.

  前言：连铸坯热送热装工艺分为热送装炉轧制和直接装炉轧制两种。

• the technical features of 100t converter and wide and heavy continuous casting slab system were introduced.

  介绍柳钢100吨转炉及宽厚板坯连铸系统技术特点。

• quick sulfur print method used to check inner quality of continuous casting slab and its artificial analysis process in baosteel are introduced.

  介绍宝钢对连铸坯内部质量进行检查的快速硫印方法及其人工判级过程。

• the length measurement and cutting control of continuous casting slab are important units in continuous casting production process.

  在炼钢连铸生产工艺流程中，连铸坯的在线长度检测和定长切割是其中的重要环节。

• a computational heat transfer model to describe the freezing process of continuous casting slab is developed.

  开发了一种描述连铸坯凝固过程的热传输数学模型。

• the calculation of strain is important in the analysis of continuous casting slab quality especially in the analysis of crack, but it is a mass work.

  在分析连铸坯质量特别是裂纹时，应力应变的计算是一项很关键且工作量很大的工作。

• final solidifying end of continuous casting slab can be obtained by testing or simulating.

  连铸坯凝固末端位置的确定方法有实验测定法和数学模型法。