英语释义

1. a fluid used especially for cooling, lubrication, rust prevention, or chip flushing in a machine metal-cutting operation or for other special effects in other metal working operations

片语

cutting oil fluid切削油

cutting fluid system切削液系统

Cutting g fluid切削液

cutting compound[机] 切削液

Pacific rust cutting fluid防锈切削液

Wax for cutting fluid切削液专用蜡

aqueous cutting fluid水基金属切削液

cutting solution切削液

cutting fluid additive切削液添加剂

rust preventive cutting fluid[机]

英汉例句

• cutting fluid is the important related material in metal cutting process.

  切削液是金属切削加工中的重要配套材料。

• through cutting experiment, the influence on cutting force and surface quality was analyzed when change the parameters such as cutting speed, back cutting depth and cutting fluid and so on.

  通过切削试验，分析了切削速度、背吃刀量以及切削液等参数改变时，对切削力及表面质量的影响。

• the conditions which have an important influence on metal cutting are work material, cutting tool material, cutting tool geometry, cutting speed, feed rate, depth of cut and cutting fluid used.

  对金属切削有重要影响的条件有工件材料、刀具材料、刀具几何形状、切削速度、进给率、切削深度和所用的切削液。

• through analysis and research on cutting fluid used by the bearing grinding process, new environment protection conducting polyaniline water-based antirust cutting fluid is selected.

  分析研究轴承磨加工工序所用的切削液，并选出新型环保导电聚苯胺水性防锈切削液进行试验。

• the effects of rust inhibitors, hard water and surfactants on synthetic cutting fluid were investigated.

  结果表明，选择合适的功能添加剂调配的合成切削液防锈性能较好，并适应较高硬度的水。

• cutting fluid is usually used to reduce cutting force, lower cutting temperature, extend tool life and enhance machining efficiency and surface finish quality during machining.

  为了降低切削温度，延长刀具使用寿命，提高生产效率和表面质量，一般均使用切削液。

• this paper illustrates the importance of cutting fluid for electro-discharge machining. it introduces the development of a new cutting fluid dx-10, its application and its main characters.

  概述了电火花线切割工作液的重要性，介绍了现有工作液——乳化液存在的缺点以及新型工作液dx-10的研制、主要特性、实验情况和推广应用前景。

• proposed that a metal cutting database is basically composed of databases of cutting data, tool geometry angles, cutting fluid and unit cutting power.

  提出由切削用量库、刀具几何角度库、切削液库和单位切削功率库基本构成金属切削数据库，给出了它们的关系模式。

• this article has explained the current situation and characteristics of traditional cutting fluid and the new cutting technology and its development trend.

  文章阐述了传统切削液的现状及使用特点和新型切削技术及其发展趋势。

• the operating mechanism, research status and development current of cutting fluid were introduced. especially, water basis type cutting fluid was discussed in detail.

  简要介绍了切削液的作用机理、研究现状和发展趋势，对水基型切削液的发展情况作了详细的论述。

• the result showed that not only the performances of this kind of water - synthetic cutting fluid were excellent, but also it was of great environment protection value.

  经实用证明：该切削液不仅性能优良，而且具有十分重要的环保意义。

• the use of cutting fluid is a matter of importance.

  小小一滴切削液，事关加工的结果。

• the cutting fluid system is an important constituent part of the manufacturing machining, and during the machining process, cutting fluid is one of the main roots of environment pollution.

  切削液系统是机械加工中重要的组成部分，切削液是造成环境污染的主要根源之一。

• the cutting fluid has stable quality, safety, environmental protection, excellent processing and antirust performance and high performance-price ratio.

  这种切削液品质稳定、安全、环保，加工、防锈性能优良，性价比高。

• the results show that the metal soften is dominant in dry turning process, a good surface can be acquired in wet turning, and the cutting fluid takes an effective effect at the end of tool wear.

  试验表明：干切削状态下金属软化效应占主导地位，湿切削可获得更好的表面粗糙度，切削液在刀具磨损后期开始发挥作用。

• based on the work demand and the environmental protection, a green cutting fluid was developed, with rapeseed oil as base oil and pig blood serum as the extreme pressure and anti-wear additive.

  基于对工况及绿色要求，采用菜籽油为基础油，猪血清为极性添加剂研制了一种绿色切削液。

• the technology and its application and the equipment selection for cutting fluid processing center in the enterprise with high volume machining production are introduced in detail in this paper .

  对大批量生产的机械加工企业中所采用的切削液处理中心技术及其设备的选型和应用作了详细的介绍。

• proposed that a metal cutting database is basically composed of databases of cutting data, tool geometry angles, cutting fluid and unit cutting power. relation models of them are presented as well.

  提出由切削用量库、刀具几何角度库、切削液库和单位切削功率库基本构成金属切削数据库，给出了它们的关系模式。

• theoretical analyses show that the cutting fluid can difficultly soak into the tool-chip interface within extremely short separating time though there is some action in the uvc process.

  理论分析表明，在超声振动切削中，切液削有一定作用，但不可能在极短的分离时间内浸入刀—屑界面。

• this cutting fluid has good rustproof, fast cooling, lubricity, easy cleaning and long life period(100 days), doesn't irritate the skin, is environment protection products.

  该切削液具有良好的防锈性、冷却性、润滑性、清洗性，且它的使用周期长（100天），不刺激皮肤，属于环保型切削液产品。

• experimental results show that the prepared cutting fluid has excellent features in high abrasion resistance, rust proof and stability.

  实验结果表明：该切削液具有良好的高抗磨性、防锈性和稳定性，其抗磨性能明显高于国外同类产品。

• the less surface tension is and the larger pb value is, the better the lubrication effect of cutting fluid and the lower the cutting force.

  切削液的表面张力愈小，最大无卡咬负荷p_b值愈大，切削液的润滑效果愈好，切削力愈低。

• the cutting force can notably be deduced using the cutting fluid during machining.

  在切削加工中，使用切削液能显着降低切削力。