英语释义

• a metal casting containing the cylinders and cooling ducts of an engine;

  "the engine had to be replaced because the block was cracked"

片语

cylinder cam block针筒三角滑块

cylinder mounting block油缸安装垫块

aluminium cylinder-block铝缸体

cylinder port block中立油缸口关闭

steam cylinder shim block汽缸垫片

cylinder group block柱面组块

rotary cylinder-block旋转缸体

4DA1 cylinder-blockDA1气缸体

piston cylinder- block活塞缸体

英汉例句

• this equipment specially used for engine cylinder block and head of water jacket and oil leakage of tao detection.

  本设备专门用于对发动机缸体、缸盖水套及油道的泄漏检测；

• participate in the cylinder head, cylinder block and crankshaft machining process development;

  参与缸体、缸盖、曲轴机械加工工艺过程开发；

• the numerical simulation of thermal stresses and deformation of an engine cylinder block casting was carried out by fdm/fem integrated system.

  对发动机气缸体铸件从浇注完到开箱落砂后的铸造过程应力场进行计算机数值模拟。

• we mainly produce the cylinder block and cylinder head castings.

  我们主要生产汽缸体和汽缸盖铸件。

• imported mirror cylinder block cylinder, oil-free lubrication, friction coefficient, corrosion-resistant, with superior durability and reliability.

  气缸体采用进口镜面气缸，无油润滑，磨擦系数小、耐腐蚀、具有超强的耐用性及可靠性。

• the cylinder block of liquid-cooled engines forms the basic framework of the engine. other parts are attached to the cylinder block or are assembled in it.

  水冷发动机的气缸体是发动机的基本构件。其他部件都支承或安装在他它上面。

• the paper analyzes the design optimization of core box using coated sand in z8040 hot box core shoot machine to make the cylinder block cores and sprue cores.

  分析z8040射芯机用覆膜砂热芯盒法制作气缸体前后端面芯及其浇口砂芯优化设计方案。

• this paper analyse the dynamic characteristics of cylinder block of type zs1105 d. i. diesel engine applying test mode analysis technique.

  应用试验模态分析技术对zs1105直喷式柴油机机体的动态特性进行了分析、研究。

• because of hard chromium plating with cylinder block of mini aero-engine, the hard machining of process of grinding is a key which affects its performance.

  某小型航空发动机气缸体由于缸孔采用硬铬镀层，使其内孔磨削成为制约该型号发动机性能的关键工艺。

• based on the dynamical impingement force on the liner, the vibration response of cylinder block resulted from piston slap force was obtained by using finite element method.

  二阶运动对缸套的动态敲击力作为载荷边界条件施加在有限元模型上，计算出气缸体在活塞敲击下的振动响应；

• this experiential study shows that the methods of cylinder block vibration and iron spectrum analysis can be used to monitor the wear condition of cylinder-piston pair effectively.

  结果表明：柴油机缸套—活塞副处于不同磨损状态时，机体表面振动相应地变化，润滑油中磨损颗粒的成分、形貌及尺寸也会发生相应的变化；

• the application of quality control spot in foundry reduces the scraps of cylinder block from 45.9% to about 20% of total scraps.

  机体因造型紧实度差而产生的废品约占总废品的45.9％，应用质量管理点后下降到20％左右。

• the conclusions are employed in cold-setting furan resin sand mould (core) in production of cylinder block of heavy marine diesel engine.

  所得结果在呋喃树脂自硬砂型（芯）大型船用柴油机缸体铸铁件生产中得到验证和应用。

• this is fitted in the cylinder block and is driven by the chain drive .

  机油泵安装在气缸体中，由链条驱动进行驱动。

• the joint between the cylinder block and the head must be tight and able to withstand the pressure and heat developed in the combustion chambers.

  气缸体与气缸盖之间的结合处必须保持密封，并且能够承受燃烧室产生的高压和高温。

• according to the 80 cylinder block bore size process analysis and research, work out the 80 boring and roll extrusion head used in boring and rolling at the same tine.

  针对80缸体的内孔进行分析和研究，设计出镗削、滚压同时进行的80镗滚压头。

• choose several group cylinder block with mix oil record go on experiment of comparing with.

  选取了几组缸体与配油盘进行对比实验。

• the thermal load of yz4105 diesel engine was investigated, and the temperature fields of yz4105 diesel engine cylinder block and cooling water were measured by using of the thermocouples.

  以yz4105柴油机热负荷为研究对象，利用热电偶测温技术，测量了不同工况下yz4105柴油机机体和冷却水的温度。

• to keep pace with power increasing of diesel engines trial to adopt high phosphorus cast iron for production of g32 model cylinder block is carried out.

  为了适应柴油机功率增大，进行了用高磷铸铁制造g32柴油机气缸套试验。

• a entity model for the cylinder block of yc6108 diesel engine has been constructed and the modal analysis been implemented.

  建立了yc6108柴油机气缸体的实体模型，并进行了有限元模态分析。

• to minimize the energy loss due to piston shoulder in sealing section, the formula to calculate the gap between piston and inner surface of cylinder block and oil sealing length are provided.

  以活塞台肩封油段的能量损失最小为优化目标，给出了活塞与缸体之间间隙以及封油长度的计算方法。

• cylinder block: dragon door style cylinder block without liner and with water pump turbo house resisted.

  缸体：龙门式、不镶缸套、水泵涡壳等零件都铸在缸体上。

• the oil pan and the lower part of the cylinder block together are called the crankcase; they enclose, or encase, the crankshaft.

  油盘和气缸体的下部一起被称为曲轴箱，用来封闭或罩住曲轴。

• computation and analysis of the cylinder block stress and deformation are conducted on a 6125q diesel engine in supercharged or cylinder diameter enlarged situation by using the finite element method.

  本文应用有限元法，对6125q型柴油机机体在增压和扩缸时的变形和应力进行了计算分析。