片语

Die Design And Calculation模具设计和计算

Boiler Design and Calculation锅炉设计计算

parameter design and calculation参数设计计算

design and calculation methods设计和计算方法

design and calculation approach设计及计算方法

improving design and calculation优化设计及计算

geometry design and calculation几何设计及计算

Vacuum design and calculation真空系统设计计算

design and calculation model设计计算模型

英汉例句

• the designed instances show that the program has considerably high accuracy for design calculation of rotary drum vacuum filter processing compressible material.

  设计实例表明该程序对于处理可压缩性物料的转鼓真空过滤机的设计计算具有较高的準确度。

• the bearing mechanism and design calculation method are described for multi stage expanded bored piles. some problems present with its field use are briefly analyzed with its benefits.

  介绍了多级挤扩鉆孔灌注桩的承载机理及设计计算方法，并对其在实际工程应用中存在的一些问题和应用效果作了简要分析。

• in this paper author introduced the design calculation method and working steps of the grease centralized lubrication system.

  本文介绍了干油集中润滑系统的设计、计算方法和工作步骤。 可供参考。

• the design calculation of the large o ring rubber self energized seal (without bolt and nut )used for the vacuum equipment and its application results are introduced.

  介绍真空设备法兰采用大直径o形环橡胶自紧式密封（不用螺栓和螺母）的设计计算及其应用效果。

• the paper introduces the structural characteristics and key positions in design calculation of the car carrier, and the different design methods to cope with its unique racking problem.

  介绍了汽车运输船的结构特点及设计计算中的关键部位，以及针对其特有问题——扭曲变形而采取的不同设计方法。

• but at present the theoretic study on this structure drop far behind the engineering applications, especially the design calculation theoretic study is short relatively.

  但是目前对于此类结构的理论研究远远落后于工程应用，特别是格构梁的设计计算理论研究相对缺乏。

• thus, the engineering design personnel「s design calculation quantity was greatly reduced and the important value of practical project was achieved.

  并应用其对微灌工程实际项目进行设计，可以大大降低工程设计人员的设计计算量，具有重要的工程实用价值。

• the advantages of the new method are deduction of the hyperbolic symbols in all design calculation equations and great simplifying calculations.

  新方法的突出优点是，在所有设计计算公式中消除了双曲函数符号，使计算大大减化。

• safety factors of rock, including shear safety factor and tensile safety factor, safety factor of lining and design calculation methods of tunnel are studied.

  研究了隧洞围巖安全系数（剪切安全系数、拉裂安全系数）与衬砌安全系数的算法以及隧洞设计计算方法。

• combined with author」s practice on design of frame with specially shaped columns in middle-highrise buildings, the problems about design calculation and construction of the frame are explained.

  结合作者在小高层建筑中采用异形柱框架结构的设计实践，简要阐述了异形柱框架设计计算、结构构造及施工等有关问题。

• this dispatcher algorithm design in 「beam plate bridge design calculation procedure」 in the asynchronous control question obtained has applied initially.

  该调度算法的设计在「梁式桥设计计算程序」的异步控制问题中得到了初步应用。

• researching the maximal tension of conveyor belt of double driving pulley by the example and ameliorates the design calculation method.

  通过具体分析研究，对双滚筒驱动带式输送机输送带最大张力的设计计算方法进行了改进。

• there is no detail description in relative standard on design calculation of vertical vessel with agitation equipment on head and support legs under its bottom.

  前言：上封头带搅拌装置、下部采用「腿式支座」的立式容器的设计计算，相关标準没有明确对其说明。

• design calculation of multi-stage mixed-flow grain dryer 5hdh35 is introduced in this paper. the application effect has been analysed.

  详细介绍了5hdh35多级混流式大型谷物烘干机的设计计算，并对应用效果进行了总结分析。

• brick-concrete structure design calculation is not very strong, primarily the concept design and structural design.

  砖混结构的设计计算性不是很强，主要的是概念设计和构造设计。

• the design calculation of hot water supply device and its installation were described in this paper.

  介绍了供热水装置的设计计算及安装方法。

• design calculation method for lug of large diameter and heavy load silo which mount on sensor cell has been introduced, and calculation results of a real engineering has been showed.

  介绍支承在载荷传感器上的大直径大负荷筒仓支座的一种设计计算方法，并给出了一个工程实例的设计计算结果。

• the analysis, improvement and design calculation of the screwy feed appliance of the flour packer was introduced.

  对螺旋供料器应用于面粉包装机进行了分析，提出了改进措施及设计计算。

• the design calculation process and related process methods for transmission ratio, gear transmission, end mechanic sealing and eccentric short roller bearing used for 180 turbine drill are described.

  叙述了180涡轮鉆具用减速器的传动比，齿轮传动，端面机械密封和偏心短圆柱轴承的设计计算过程和有关处理办法。

• the article introduce structure, design calculation and control principle of preheater in hight atmospheric molecular distillation equipment.

  本文介绍高真空分子蒸馏设备中预热器的结构、设计计算、控制原理。

• this software can be not only used for the design calculation of full system, but also can be used for the calculation of single subfile system by calling the subprogram in it.

  该软件具有较强的适应能力，既可以进行整个系统的设计计算，又可以调用其中某子程序，进行单个子系统的计算。

• this paper introduced the structural design and working mechanism of spds-120 and spds- 114 releasing tools, especially the structure, characteristics and relevant design calculation of spds- 114.

  介绍了spds-120和spds-114两种型号丢手工具的结构设计、工作原理，重点介绍了spds-114型丢手工具的结构、特点及相关设计计算。