英语释义

1. a circular disk in the edge of which diamond dust or carbon diamonds are set to form a saw suitable for cutting hard material (such as stone)

片语

diamond frame saw blades金刚石框架锯条

electroplated diamond wire saw电镀金刚石线锯

diamond d saw金刚石锯

diamond hand saw金刚石带锯

Diamond frame saw blade金刚石框架锯条

diamond circular saw blades金刚石圆锯片

diamond d saw blade金刚石锯片

英汉例句

• manufacturing cost of laser weld diamond saw blade has been reduced. remarkable economic effect has been gained.

  在使用中可降低激光焊锯片的制造成本，取得好的经济效益。

• based on the experiments of cutting engineering ceramics by diamond saw blades, the factors of influencing cutting forces are analyzed.

  在用金刚石锯片切割工程陶瓷材料的切削试验基础上，对影响切削力的各种因素进行了分析。

• the study of this subject has guiding significance to the industrial production of diamond saw blade .

  本课题的研究对金刚石圆锯片激光焊接的工业化生产将具有一定的指导意义。

• structure and properties of diamond saw segments before and after partial prealloying were analyzed by sem and xrd.

  采用xrd及sem等手段，对部分预合金化前后金刚石锯片胎体的组织结构及性能进行了测试分析。

• the paper was aimed at investigating the quantitative relation between formulation parameters of bits and performance of diamond saw blade.

  通过定量分析，得出了锯片的效率和寿命与刀头配方有关参数的量化关系。

• the research results help to predict the cutting performance of diamond saw blade.

  该机理有助于预报锯片的切割性能。

• horizontal and longitudinal movement as well as accurate positioning of the rotating diamond saw blade can be realized by means of vector convertor speed governing technique.

  应用矢量变频调速技术，使旋转的金刚石锯片实现横向和纵向的往返移动以及精确的定位控制。

• the laser welding process of diamond saw blade is advanced.

  金刚石锯片的激光焊接工艺较为成熟；

• based on the theory of producing and controlling the circular diamond saw blade noise, the low noise diamond saw with laser cutting slot patterns is investigated in this paper.

  根据金刚石圆锯片基体上激光切缝图形降低噪声的原理，设计了几种激光切缝图形的消音金刚石圆锯片；

• to select correctly the diamond saw grit under the given conditions in application is a prerequisite for gaining optimum effectiveness and benefit.

  在已知应用条件下正确选用锯片金刚石磨粒乃是获得最佳效益的先决条件。

• depending on the experience of making 300,000 pcs of middle-sized diamond saw blade per year, we are successful to manufacture the welding machine, as well as other machines, and keeping perfection.

  我们凭借着每年制造300，000片金刚石锯片的产量的经验，成功研发和制造出焊架及机械，并不断完善。

• this article analyzes the main factors and selection of rational cutting conditions influencing the surface flatness error and other defects in sawing marble plates with diamond saw blade.

  本文分析了金刚石框锯在锯切大理石时，引起表面平面度偏差和其它缺陷的主要因素以及合理工作条件的选择。

• on the whole, this kind of machine has high performances and low price and it is a good dressing equipment for diamond saw core.

  综上所述，我们认为本机是一种具有较高性能价格比的、比较优良的锯片基体专用修整设备。

• for tensity disposal of saw blade, the cutting heat was considered when analysing the stress and deformation of the new combined diamond saw blade by applying ansys.

  针对圆锯片基体的适张处理，在考虑切削热影响的情况下，应用ansys对新型组合式金刚石圆锯片基体进行应力、变形分析。

• the composition and microstructure of the diamond saw blade joint welded by laser welding were studied using x ray diffraction and sem, and the mechanical properties of welded joint were measured.

  利用x射线衍射分析和扫描电镜，研究了金刚石锯片激光焊接接头的成分和组织，并测试了接头的力学性能。

• diamond saw blade is a tool which is widely used in cutting hard brittle materials, such as stone, concrete, glass, crystal, graphite electrode and so on.

  金刚石锯片广泛地应用于切割石材、混凝土、玻璃、水晶、石墨电极等硬脆材料。

• a method to obtain the diagnostic signal, the acoustic feedback control system and the principle of laser welding diamond saw are described in the paper.

  介绍了特征声信号的提取方法及其用于激光焊接金刚石锯片的反馈控制系统构成和基本原理。

• in the paper , analysis of wear mechanism of circular diamond saw blades with several typical segment structures being widely used in stone processing area.

  本文对目前石材加工领域广泛使用的具有几种典型节块结构的金刚石圆锯片的磨损机理进行了一些分析。

• i am a sales manager es personnel, our company's main products are diamond saw blades and cup grinding wheels, they are used for cutting stone material and ceramic.

  我现在的工作是一名销售人员，我们公司的主要产品是金刚石锯片，用于切割石材和陶瓷的。

• through research on the influence of the peripheral speed of diamond saw blade upon the wear of diamond cutting segments , this paper deals with the wear mechanism of the same.

  本文通过研究金刚石锯片线速度对锯齿磨损的影响，探讨了金刚石锯齿的磨损机理。

• improving the service life and cutting efficiency of the segment of cutting border are the key problem of studying the metal bond diamond saw blades.

  提高切边刀头寿命和切割效率是金属结合剂金刚石锯片研究的关键问题。

• in addition, omni-directional cutting can be made by waterjet, therefore it is better than traditional diamond saw cutting.

  而且，水射流可以切割任意形状的工件，所以比传统的金刚石锯片切割有较高的优越性。