片语

die flat steel模具扁钢

Die Trim Steel修边镶块

Die Trim Steel Assistant模具修边镶块辅助

nitrogenous die-steel含氮模具钢

die block steel模具钢

Die Casting Steel压铸模具用钢

plastic die 718 steel塑料模具718钢

mold steel模具钢；[材] 型模钢

die e steel模具钢

英汉例句

• the advance in plastics die steel, high cleanliness die steel, high isotropic die steel and die steel products, and the development of high performance die steel are presented in this article.

  介绍了国内外塑料模具钢、高纯凈度模具钢、高等向性模具钢以及模具钢品种的进展和新型高性能模具钢的开发。

• the microstructure and composition of precipitated phase in unquenched and untempered die steel for plastic mould have been investigated using following techniques:tem, aem, eds and chemical analysis.

  利用电子显微镜技术、化学分析方法观察与分析了非调质塑料模具钢中微合金析出相的显微特征及成分。

• the prospect of market of die steel products in china is systematically analyzed.

  系统地分析了我国模具钢产品的市场前景。

• the importance of developing new die steel, and some die steel , specially hot forging die steel a and plastic die steel b produced by tisco have been introduced in this article.

  介绍了开发新型模具钢的重要性，介绍了太钢生产的一些模具钢品种，重点介绍了开发出的热作模具钢a和塑料模具钢b。

• factory production of riveting die steel using high-quality refined by mold. with the appearance of beautiful, feel comfortable, precise concentricity characteristics.

  本厂生产的铆合模采用优质模具钢料精制而成，具有外观美观，手感舒适，同心度精準的特点。

• effect of filling ratio and melting speed on the quality of esr ingot of h13 hot-work die steel was studied.

  研究了填充比与熔速对h13热作模具钢电渣质量的影响。

• analyzed the cold die steel performance characteristics and use, introduced the cold die steel heat treatment technology and surface strengthening technical development.

  分析了冷作模具钢的性能特点及用途，介绍了冷作模具钢的热处理技术和表面强化技术的发展。

• with the increasing of the diameter and interspacing of micro-convexes, friction coefficient and wear volume of die steel decreased slowly.

  随着微凸体直径、间距的增大，模具钢表面摩擦系数相应减小，体积磨损量亦逐渐减小。

• the roller sheaths made of nodular cast iron instead of alloy die steel was discussed from choosing material and heat treatment, and it has been applied in production.

  从选材和热处理角度论述了以球墨铸铁代替合金模具钢制造轧球机轧辊套，对以低成本材料代替高成本材料进行了有益的探索，并应用于实际生。

• the nature of strength and toughness of a new cast hot working die steel (chd steel) has been studied through the micro analysis in this paper.

  采用微观分析方法探讨了新型铸造热锻模具钢（chd钢）的强韧化机理。

• the viewpoints may be of large reference value for metallurgical corporations and die industry to establish the die steel development plan.

  对我国冶金企业和模具制造行业在制定模具钢发展规划中有一定的参考价值。

• the flat die steel production line product; main product: high alloy flat die steel rolling program and pass design at fushun special steel co.

  介绍了抚顺特殊钢有限公司模具扁钢生产线生产工艺；主导产品：高台金模具扁钢轧制程序设计及孔型设计。

• results showed that effect of using the hot spray-welding process to strengthening the hot-working die steel surface was good.

  结果证明采用热喷焊工艺对热作模具钢表面进行强化的效果优良。

• compared with the forging die steel, casting forging die steel although toughness is low, but high strength, red hardness is good, with low notch sensitivity and high resistance to thermal fatigue.

  与锻造模具钢相比，铸造热锻模具钢虽然韧性低，但强度高、红硬性好，具有较低的缺口敏感性和较高的抗热疲劳性。

• the boron-doping technology and metallurgical micro-structure of die steel are discussed from the angle of its resistance to repeated shock compression.

  结果指出：模具钢渗硼层在多次沖击压缩载荷下发生一定的塑性变形。

• the results are summarized as follow: a certain plastic deformation occurs in boron-doped layer of die steel bearing repeated shock compressive loads.

  结果指出：模具钢渗硼层在多次沖击压缩载荷下发生一定的塑性变形。

• martensitic hot die work steel cant work at 700 ℃, but austenitic hot work die steel has good high-temperature strength.

  在700℃下，马氏体型热作模具钢难以工作，奥氏体型热作模具钢具有良好的高温强度。

• the hot-forging dies made by new-type precision casting die steel are applied on site.

  采用新型精铸模具钢制备热锻模并进行现场应用。

• the reason of existence of banding carbide structure in cr12 cold-worked die steel and the influence of asymmetric carbide structure on mechanical behaviour were introduced.

  介绍了冷作模具钢中带状碳化物组织存在的原因，以及不均匀的碳化物组织对机械性能的影响。

• the mass effects of die steel 2311 and 2738 upon their heat treatment were rated by numerical simulation technology and verified by practical experiments.

  利用数值模拟技术对2 311和2 738两种模具钢热处理质量效应进行了定量评估和现场试验验证。

• isothermal spheroidizing process for h13 hot-working die steel was studied in th is paper.

  对h13热作模具钢的等温球化退火工艺进行了试验研究。

• this method of vacuum heat-treatment is therefore regarded as an effective process for die steel d2.

  从而证明这是提高d2钢冷作模具的一种有效热处理工艺。

• in this paper, the superplasticity and die forming of new plastics die steel pms has been investigated. under the test conditions of 630~670℃temperature, the superplasticity of this steel is fine.

  新型塑料模具钢pms镜面钢在630～670℃变形温度范围内和较宽的应变速率范围内具有较好的超塑性能。

• the performance and application of plastic die steel made in our country are introduced and compared with others domestic or abroad for reasonable selection in different cases.

  介绍了我国新研制的塑料模具用钢的性能和应用概况，并与国内外常用的塑料模具钢材进行了比较，以便在不同使用状态下合理选用模具材料。