英语释义

• a fastener that is inserted into holes in two adjacent pieces and holds them together

片语

nog支撑；钉

concealed dovetail暗（鸠尾）榫

spike dowel钉栓

detached dowel分离柱

dowel joint定缝钉接合；榫钉接缝

Location dowel定位销

dowel pile榫桩

dowel handle定位销把手

wire dowel穿钉

dowel bolt精确配合螺栓

tapered dowel锥形销钉

英汉例句

• methods58 cases with failing in casting dowel crown were classified, analyzed and summarized.

  方法对58例铸造桩冠失败患者进行归类、分析、总结。

• splitting forces are higher and dowel action is greater with the use of large diameter bars.

  剪切力较高，销栓作用比大直径钢筋更有用。

• fit a dowel pin here to keep the adjacent parts aligned.

  在这里装一个定位销，是相邻的两个部件对準。

• conclusion this method could obtain the strength of crown dowel with root cavity without fall and cleft so that to save time and payment and prolong the use of ceramic teeth.

  结论用铸造法制作桩冠桩核强度高，与根管壁密合，粘固手不易脱落与原烤瓷牙冠密合，不需要重新制作，节约了时间和费用，延长了烤瓷冠的使用寿命。

• drill bits for dowel and bolts and cord.

  鉆头的销子和螺栓和脊髓。

• tooling plate: easy access mounting, accurate dowel location, accepts shocks.

  模具板：轻松访问安装，定位準确的木钉，接受沖击。

• he drove next to the local hardware store, where he found a brazilian-made dowel for $5 and some nails in an open bin that the clerk assured him were made in the usa.

  随后他去了一家本地的五金店，在那里卖了一个5美元的巴西木楔，还有放在盒子里的钉子，店员向他保证说那是美国制造的。

• objective to restore serious dental defects using reinforced fiber composite resin dowel cores.

  目的利用加强纤维复合树脂桩核修复牙体严重缺损。

• pull out the jig dowel posts, get your hand into the sound hole and carefully peel away the cardboard jig.

  拉出夹具木钉职位，进入音孔你的手 ，小心剥离剥夺了纸板夹具。

• make sure that the hole is deep enough to allow a 1/16-in. space at each end of the dowel for excess glue.

  在两块板上都要保证孔的深度超过圆榫的长度1/16英寸，以便给多余的胶水留有空间。

• contractor to provide reinforcement free zones block outs dowel bar reinforcement and openings in cast in situ viaduct to facilitate interfacing.

  承包商应提供无钢筋区、预留孔堵块、合缝钢筋加固和现浇高架桥内开口，以便接口。

• the joints between the central slab and the four side slabs can be specified either by an efficiency of shear transfer or by the size and spacing of dowel bars.

  中心板与四块边板之间的联系可以由剪力传递效率，或者由传力桿的尺寸和间距来表示。

• the transfer of shearing and moment must be considered in dynamic analysis because the model of dowel bar affects the modal frequency and modal shape directly.

  指出传力桿模型对模态频率和主振型有直接影响，动力分析中应当考虑接缝的剪力传递和弯矩传递。

• not all parts will receive dedicated dowel pin holes.

  并非所有的部分将得到专门的柱销孔。

• core drilling is also commonly used to create holes for routing cables or placing anchoring bolts installing load carrying devices or dowel bars or for concrete sample analysis.

  鉆探也是常用的路由电缆制造或配售锚孔螺栓承载装置安装销子或酒吧，或混凝土样本分析。

• tooling plate:universal mounting pattern with standard dowel locating holes.

  模具板：通用模式与标準安装定位桩孔。

• as ahead tooth, it has an ideal effect for dowel crown of casting and metal board, so as for beautiful and reducing lose of bone.

  对于前牙，为了美观和减缓牙槽骨的吸收，采用铸造桩冠加金属翼板的修复方法，可以取得较理想的效果。

• i go to a place where a dowel splits off.

  我爬到钟顶端定位梢分开的地方。

• dowel pins need to be short to allow easier dis-assembly and assembly of the mould during use.

  合销必须足够短，以便在使用中能更易于模具的拆卸和安装。

• the two dowel pins align the cap and base of the housing.

  用两个定位销将座罩和轴承座基础对準。

• the carpenter gauged the dowel with calipers.

  那木匠用卡钳估量暗榫。

• if i remember correctly , the splitter came with some kind of dowel or locking pin that just wasn't appropriate .

  如果我没有记错，分配器来与一些种桩或锁定引脚，刚才是不恰当的。

• objeact:to study the stress distribution of angled dowel crown in anterior maxillary teeth.

  目的：研究上前牙带角度桩冠修复的应力分布。

• the nonlinear vibration behaviors of a rectangular moderate thickness plate with dowel on elastic foundation were investigated.

  研究了弹性地基上带传力桿的间断中厚矩形板结构的非线性振动特性。

• tooling plate: standard dowel locating holes and accurately milled locating slots.

  模具板：标準定位桩孔，定位準确磨槽。

• the load transfer on dowels is modeled as vertical springs, whose stiffness depends on the dowel properties and the dowel-plate interaction.

  荷载在传力桿中的传递由竖向弹簧模拟，其弹簧刚度取决于传力桿的特性以及桿与板间的相互作用。

• where possible screw and dowel hole clearance will be provided in the manifold.

  只要可能，在分流式系统上应提供螺丝及合销孔。