片语

elastohydrodynamic model弹性流体动力模型

micro elastohydrodynamic微弹流

stationary elastohydrodynamic稳态弹流

elastohydrodynamic behaviour弹性流体润滑

Elastohydrodynamic lubrication弹性流体动力润滑

steady elastohydrodynamic稳态弹流

isothermal elastohydrodynamic等温弹流润滑

partial elastohydrodynamic部分膜弹流

thermal elastohydrodynamic热弹流

英汉例句

• With the multilevel method, a complete solution of thermal elastohydrodynamic lubrication (EHL) of finite line contacts is obtained for an axially profiled cylindrical roller.

  同时，将有限长线接触热解与有限长线接触等温解进行了比较。

• In this paper the elastohydrodynamic lubrication of water-lubricated rubber sleeve bearing is examined.

  本文对水润滑橡胶套筒轴承进行了弹流润滑分析。

• An elliptical cylinder model was built to analyze the effects of cylinder liner radial deformation on the elastohydrodynamic lubrication performances of piston ring.

  分析活塞环弹流润滑性能时考虑气缸套径向变形的影响是非常必要的。

• A numerical solution for the elastohydrodynamic line contacts problem under heavy loads is presented, and the corresponding method which makes use of the inverse iteration is also described.

  提出了等温线接触弹流问题的完全数值解，通过逆解迭代计算方法，获得了不同工况条件下的油膜压力分布、油膜厚度和油膜形状。

• An unequal distance multigrid method is developed to solve the thermal elastohydrodynamic lubrication of line contact problem.

  使用不等距多重网格法求解了线接触热弹流润滑问题。

• The elastohydrodynamic lubrication theory was used to study the elastohydrodynamic lubrication problem of swing movable teeth transmission.

  应用弹性流体动力润滑理论，建立了摆动活齿传动弹流润滑的基本方程。

• To measure the film thickness is usually important for investigating elastohydrodynamic lubrication.

  弹流研究中，测量摩擦副之间的油膜厚度是一项十分重要的工作。

• This paper introduces an experimental research on the effects of the vein direction of rough surfaces of discs on the condition of elastohydrodynamic lubrication.

  本文用实验方法研究了粗糙表面的纹理方向对弹性流体动压润滑状态的影响。

• The influence of gear parameters on its lubrication effect is studied by the theory of elastohydrodynamic lubrication (EHL).

  应用弹性流体动力润滑理论，分析了模数、齿数等参数对齿轮副润滑性能的影响。

• A method for measuring the thickness of the elastohydrodynamic lubricating oil film using a strain gage is presented.

  本文介绍用电阻应变法测量弹性流体动压润滑油膜的厚度。

• In the elastohydrodynamic lubrication (EHL) of human joints, if the lubricant is not supplied enough, there will appear the phenomenon of liquid starvation.

  在人工关节弹流润滑中，如果润滑剂供应不足，则会出现乏液现象。

• The elastohydrodynamic lubrication effect of the dynamic and static back journal bearing used as supporting part was analyzed.

  对用于承载部件的动静压支承滑动轴承进行了弹性流体润滑分析。

• The yield thickness is the lower limit of elastohydrodynamic lubrication film thickness.

  屈服膜厚是弹流润滑膜的下限。

• This paper mainly deals with the experimental research and theoretical analysis on elastohydrodynamic lubrication characteristic of the rough surface with arbitrary orientation.

  本文讨论试件具有任意条纹方向的粗糙表面在弹流润滑状态下的实验研究与理论分析。

• The film thickness is analyzed with elastohydrodynamic lubrication theory, tooth elastic deformation computed by finite elements.

  并利用弹流理论来研究啮合轮齿间油膜厚度，用有限元法来研究轮齿受载弹性变形。

• Therefore, preceding the research of the elastohydrodynamic lubrication of wheel gear for a perfect strength designing theories has the certain theories meaning.

  因此，进行齿轮动态润滑研究对完善齿轮强度设计理论具有一定的理论意义。

• The study on traction behaviors of lubricants which have great influences on dynamic properties of rolling bearings is a vital field of elastohydrodynamic lubrication research.

  弹流拖动特性是润滑剂的重要性能，它对滚动轴承的动态性能有着很大的影响。

• The mathematical and finite element models were established to deal with elastohydrodynamic lubrication calculation of main journal bearings of internal combustion engine.

  建立了内燃机主轴承弹性流体动力润滑计算的数学模型和有限元模型。

• The pressure- viscosity (P- V) coefficient and solidification pressure values of lubrication oils are key testing date for the application of elastohydrodynamic theory to tribological design.

  润滑油的压粘系数和固化压力是弹流理论应用于摩擦学工程设计的关键试验数据。

• In traditional design, there is no quantitative analysis on the elastohydrodynamic lubrication for engine's connecting rod bearing.

  在传统设计中对内燃机连桿轴承的弹性流体动力润滑设计还没有定量分析。

• Using numerical techniques, the thermal elastohydrodynamic lubrication(EHL) in line contact under reciprocating motion was investigated.

  应用数值分析方法求解了线接触往复运动。况下的热弹性流体动力润滑特性。

• This paper introduces the method of calculating minimum oil film thickness between teeth of gear pump on the basis of elastohydrodynamic lubrication theory, with achieving computer-aid-analysis.

  本文根据「弹流」理论，介绍了计算齿轮泵齿间最小油膜厚度的方法，并且实现了计算机辅助分析。

• According to the new lubrication model, the principal lubrication mechanism of natural human joints is elastohydrodynamic lubrication with squeeze effect.

  该模型认为人类天然关节的润滑机理主要为带有挤压效应的弹性流体动力润滑。

• A new viewpoint is presented: the common machinery are all under the partial elastohydrodynamic lubrication state.

  本文提出一种实际机械中的润滑均为部分弹流状态的新观点。

• The influence of oil ambient viscosity on non-steady-state thermal elastohydrodynamic lubrication was analyzed.

  分析了不同的环境粘度对非稳态热弹流润滑的影响。

• Calculation of the oil film thickness of the crack shaft has been carried out according to elastohydrodynamic lubrication theory, which confirms the outcome.

  并运用弹性流体动力润滑理论对曲轴轴颈油膜厚度进行了计算，验证了实际使用时出现的结果。

• The results shows that the elastohydrodynamic analysis method combined with compliance matrix is a good and efficient method to design journal bearing of internal-combustion engine.

  结果表明，结合柔度矩阵的轴承弹流润滑设计方法是解决复杂轴承结构设计的有效方法。