英语释义

• a type of networking technology for local area networks; coaxial cable carries radio frequency signals between computers at a rate of 10 megabits per second

片语

synchronous EthernetSynchronous Ethernet, also referred as SyncE, is an ITU-T standard for computer networking that facilitates the transference of clock signals over the Ethernet physical layer. This signal can then be made traceable to an external clock.

ethernet switch交换机；以太网交换机

ethernet network以太网

carrier EthernetCarrier is a marketing term for extensions to Ethernet to enable telecommunications network providers ("common carriers" in US industry jargon) to provide Ethernet services to customers and to utilize Ethernet technology in their network

Giga Ethernet高速乙太网路

Ethernet interface以太网接口

fast ethernet高速乙太网路

wireless Ethernet无线以太网

Ethernet connection以太网连接

Ethernet Setup以太网设置

active Ethernet有源以太网

embedded Ethernet嵌入式以太网

英汉例句

• It lets you group and isolate your computing resources on their own network without running out Ethernet cables and physical network devices like in traditional it networks.

  它允许您对其网络上的计算资源进行分组和隔离，无需像在传统IT网络中一样耗用以太网电缆和物理网络设备。

• In short, this driver provides user-space access to the Ethernet device so that packets can be transmitted and received.

  简单地说，这个驱动程序提供对以太网设备的用户空间访问，这样就可以发送和接收数据包。

• Upon return to the docking station, the Ethernet connection would be detected and communication resumed over this interface.

  在返回固定位置时，以太网连接会被重新检测到，通信就可以在这个接口上恢复。

• When configuring the profiles of the VIO Servers on the HMC, create two virtual Ethernet adapters on each server.

  在HMC中配置VIO服务器的概要时，在每个服务器上创建两个虚拟以太网适配器。

• The difference in environments is that this one had the interrupt processing for each Ethernet adapter bound to a CPU on the node in which the adapter resides.

  这两个环境之间的差异是，这个环境将每个以太网适配器的中断处理绑定到适配器所在的节点上的一个CPU。

• The second virtual Ethernet adapter on each of the VIO Servers must be configured as a non-trunk adapter.

  必须将每个VIO服务器上的第二个虚拟以太网适配器配置为非干线适配器。

• If you「re on a network with DHCP, you」ll probably find that your system has already come up with an IP address on its primary Ethernet port.

  如果您位于一个带有DHCP的网络上，那么您可能会发现您的系统在其主以太网端口上已经有了一个IP地址。

• Having one IP address for some or all of the Ethernet adapters in a large multi-node system can be beneficial for system administrators and network administration.

  可以让一个大型多节点系统中的一些或所有以太网适配器共用一个IP地址，这对系统管理和网络管理有帮助。

• For example, putting two Ethernet adapters that run at different speeds on the same network will generally force all adapters on the network to run at the speed of the slower one.

  例如，如果在同一网络上使用运行速度不同的两个以太网适配器，一般会迫使网络上的所有适配器以低速适配器的速度运行。

• In the environments described in this article, the default Ethernet adapter interrupt processing took place on CPUs on the first node regardless of the node where the adapter actually resided.

  在本文描述的环境中，在默认情况下，无论适配器实际上在哪个节点上，以太网适配器的中断处理都在第一个节点的CPU上进行。

• Each partition can have up to 65,534 virtual Ethernet adapters connected to the virtual switch.

  每个分区可以有最多65,534个虚拟以太网适配器连接到虚拟交换机上。

• The enablement and setup of virtual Ethernet does not require any special hardware or software.

  建立和设置虚拟以太网不需要任何专门的硬件或软件。

• As with hubs, Ethernet implementations of network switches are the most common.

  和集线器一样，网络交换机的以太网实现是最常见的。

• Those Settings ensure that each Ethernet adapter has its interrupts processed on a CPU on the node on which the adapter resides.

  这些设置确保每个以太网适配器的中断都在这个适配器所在的节点的CPU上处理。

• When we shut the interface down, we turn off the Ethernet ports, remove them from the bridge, and remove the bridge interface.

  当我们关闭接口时，我们关闭了以太网端口，将它们从网桥上除去，然后除去网桥接口。

• Add a virtual disk definition unit and a virtual Ethernet connection unit to the virtual image.

  向虚拟化镜像添加一个虚拟的硬盘定义单元和一个虚拟的以太网连接单元。

• Create a dependency link from the virtual Ethernet connection unit in the virtual image to the L2 connection in the physical server.

  创建一个从虚拟镜像中的虚拟化以太网连接到物理服务器中l2连接的依附性链接。

• On the virtual Ethernet connection「s capability, set the type of connection to the host system」s network connection to use, such as bridged, host-only, or NAT.

  对于虚拟以太网连接的功能，您可以将连接的类型设置为主机系统的网络连接，以使用，例如桥连的，只有主机的或者NAT。

• It monitors the health of a particular service (or services) through either a serial line or Ethernet interface or both.

  它通过串行线、以太网接口或者同时使用二者来监测特定服务(或多个服务)的健康状况。

• If you opt for the latter, you will also have to connect your local workstation to the external Ethernet switch.

  如果您选择的是后者，那么您还必须将本地工作站连接到那个外部的以太网交换机。

• The increasing CPU utilization is attributed to unnecessary node hops for interrupts being taken on Ethernet adapters on non-primary nodes but being processed on CPUs on the primary node.

  CPU利用率快速增加的原因是，在非主节点上的以太网适配器中接收的中断却在主节点的CPU上处理，这导致了不必要的节点跳转。