片语

heat compensator distortion test method加热变形试验方法

heat compensator distortion test热变形试验

heat compensator distortion temperature热变形温度

Tensile heat distortion热变形张力

heat treatment distortion热处理畸变

the heat treatment distortion热处理变形

heat of distortion畸变热

heat compensator distortion point热变形点

英汉例句

• The company specializes in developing high temperature PPS material, the heat distortion temperature greater than 260 degrees, is a comprehensive performance of special engineering plastics.

  本公司专业生产研发耐高温pps材料，其热变形温度大于260度，是一种综合性能优异的特种工程塑料。

• Its unique crystalline structure results in increased strength, stiffness, heat distortion temperature and performance under load as a homopolymer.

  其独特的，增加了强度，刚度晶体结构的结果，热变形温度和负荷下表现为均聚物。

• The cured system of epoxy resinlead benzoylate has high heat distortion temperature, but its dielectric properties at high temperature and heat ageing life deteriorate.

  环氧-羧酸盐体系虽然热变形温度和热态强度较高，但高温下介电性能差，耐热老化性能也不好。

• It combines flame retardant ability with an excellent balance of high strength, stiffness and heat distortion temperature.

  它结合了火焰高强度优良的平衡，刚度和热变形温度阻燃能力。

• Improved heat distortion temperature and low temperature impact strength.

  提高热变型温度和低温沖击强度。

• Impact heat distortion temperature and low; temperature impact strength.

  提高热变型温度和代温沖击强度。

• As the chlorine content of the product increased, the heat distortion temperature increased significantly, its targets have been increased mechanical strength, its wide range of applications.

  该产品随着氯含量的提高，其热变形温度明显上升，其机械强度指标也相应提高，其应用范围十分广泛。

• The results showed that the tensile strength, thermal-oxidative stability, flame retardancy and heat distortion temperature of the composites are enhanced with increasing MHSH contents.

  实验结果表明，复合材料的拉伸强度、热氧化稳定性、阻燃性能和热变形温度随着MHSH含量的增加而显着提高。

• Raise heat distortion temperature and Raise anti-impact strength from low temperature.

  提高热变型温度和低温度沖击强度；

• The resin toughness is good, the casting body heat distortion temperatures are high, is a complex entanglement with a good performance resin.

  该树脂韧性好，其浇铸体的热变形温度高，是一种综合性能良好的缠绕用树脂。

• SiO2-JX could replace short glass fiber in the modification of PA6, improving the heat distortion temperature, removing the appearance of glass fiber, reducing shrinkage and the cost.

  晶须硅可取代短玻纤使用，提高热变形温度、消除玻纤外露，降低收缩率及生产成本等。