片语

high energy solid oxidizer高能固体氧化剂

high temperature solid solution高温固溶

high temperature solid高温固体

high temperature solid phase高温固相

high quartz solid solution高温石英固熔体

high energy solid propellants高能固体推进剂

High temperature solid method高温固相法

英汉例句

• The high solid content emulsion was efficiently synthesized by multistep emulsion polymerization.

  运用多阶段乳液聚合法可以有效合成高固含乳液。

• The high solid content hydroxy acrylic resins were modified by microgels.

  利用制备的微凝胶对高固体份羟基丙烯酸树脂进行了改性。

• The high solid content in slurry system, caused by the bad working condition of reactor for the first FCC unit in Jinzhou petrochemical company, affected the normal production of unit.

  锦州石化公司一套催化裂化装置沉降器工况不好，导致油浆系统固体含量高而影响装置正常生产。

• There is a reference to synthesis progress, difficulty and existing problems of high solid polyurethane.

  综述了国内外高固含量聚氨酯的合成进展、合成难点及存在问题。

• The straw contains a high content of lignin, which cannot be well utilized by anaerobic bacteria in high solid anaerobic digestion process.

  农作物秸秆含有大量难降解的木质素，难于直接被厌氧微生物利用，降低了高固体厌氧消化技术处理农作物秸秆的效率。

• The anaerobic digestion treatment for high solid content of municipal domestic refuse is presented, and the study is carried out.

  提出了城市生活垃圾的高固体含量厌氧消化处理方法并对此进行了研究。

• A novel method for producing urea formaldehyde resin with intensive viscidity, high solid content and low toxicity is introduced in this report.

  介绍一种粘结强度大、固含量高、低毒环保型的脲醛树脂粘合剂的合成方法。

• The present situation and development of solid rocket motor liner forming at home are reviewed. The test results of novel solvent-free high solid content liner adopting throw...

  综述我国固体火箭发动机衬层成型工艺的现状和发展，介绍了无溶剂高固体份衬层抛涂成型新技术的试验结果。

• Hydroxyl acrylic acid resin (HAR) with high solid and low viscosity was polymerized from an appropriate acrylic acid monomer in solution.

  采用溶液聚合法合成了高固体分低粘度的羟基丙烯酸树脂(HAR)，详细讨论了引发剂、链转移剂、反应温度、溶剂等对HAR粘度的影响。

• Finally, the principles of the preparation of high solid loading slurry with low viscosity are discussed.

  最后，讨论了高固相、低粘度陶瓷浆料的制备原则。

• A high solid elastic polyurethane prepolymer has been prepared based on MDI, PAPI, HDI, IPDI and polyester polyols and polyether polyols.

  采用MDI、PAPI、HDI、IPDI等不同的异氰酸酯和聚酯多元醇、聚醚多元醇等反应，制备高固体分的聚氨酯弹性体预聚物。

• Vinyl acetate and butyl acrylate as mixed monomer can be used to prepare high solid content water based white emulsion.

  以醋酸乙烯及丙烯酸丁酯为混合单体来制备高固含量水基白乳胶。

• At present, the super-short oil alkyd melamine should be paid great attention to, and the long-term prospect is the sub-high solid or high solid polyester paint.

  目前应重视超短油度醇酸氨基漆，而较长时间的发展方向是準高固体分和高固体分聚酯氨基漆。

• It is pointed out that the research of green coating should be directed to the development of high solid coating, non-solvent coating, powder coating, radiation curable coating and water-base coating.

  介绍了世界涂料发展的趋势，指出绿色涂料的研究方向应该向高固体份涂料、溶液无溶剂涂料、粉末涂料及辐射固化涂料和水性涂料发展。

• Particle Size, Stabilities, Viscosity and properties of films of high solid content copolymer emulsion of BA/MMA/MAA with different monomer ratio was studied.

  研究了用不同配比的单体制得的高固含量BA／MMA／MAA共聚物乳液的乳胶粒、乳液的稳定性、粘度及乳胶膜性能。

• If dispersant is added in calcium carbonate grind, either high solid content and low viscosity paste may be obtained, or energy consumption and cost is lowered.

  碳酸钙研磨中加入分散剂，既可得到高固含量、低粘度的浆料，又可以降低能耗，节约成本。

• According to the requirement of coatings, yellow zine epoxy primer and two - pack high solid acrylate polyurethane coating are chosen to be containers paints.

  根据涂层的要求，选择了锌黄环氧底漆和双组分高固体丙烯酸聚氨酯漆作为厢体的涂料。

• This paper studied the thermosetting acrylic resin with high solid and low viscosity in terms of its formulation, performance and the influential factors upon resin-polymerization.

  研究了高固体分、低粘度热固性丙烯酸树脂的配方和性能，影响树脂合成的因素。

• Preparation and performance of high solid acrylic polyurethane automotive coating are introduced.

  介绍了高固体分丙烯酸汽车涂料的制备和性能。

• The cationic polyacrylate latex with high solid content were synthesized by seeding semi-continuous emulsion polymerization.

  采用种子预乳化半连续法，合成了固含量高的阳离子型聚丙烯酸酯乳液。

• This conclusion explains the key element of the MLD, and also points out that maximum likelihood deconvolution has a very high solid property feature.

  这一结论是解释极大似然反褶积成功的关健，同时也说明极大似然反褶积具有相当高的稳健性。

• MCAF exhibits excellent thickening efficiency with high solid loading and low SS effluent, therefore is more suitable for thickening low concentration excess sludge.

  改进型涡凹气浮用于浓缩低浓度剩余活性污泥时浓缩效果好，固体负荷高，出水SS低，比涡凹气浮更适合于低浓度剩余活性污泥浓缩。

• A double component coating, acrylic polyurethane with high solid and good performance, was prepared by the reaction of HAR and HDI.

  由HAR和六次甲基二异氰酸酯反应制备了性能优异的高固体分双组分丙烯酸聚氨酯涂料。

• The high solid content, good physical and mechanical properties, water resistance, weather resistance and durability.

  其固含量高，物理力学性能佳，耐水性，耐候性，耐久性好。

• Under the high solid flux, in the dilute flow region, the particle velocity is analyzed and discussed with the variation of operating condition.

  对稀相区在较高固粒流率下对颗粒运动速度进行了变工况分析和讨论。

• The world trend of high solid emulsion, powdered emulsion, cross-linking emulsion, non-water emulsion and IPN emulsion is reviewed and the status of polymer emulsions in China is described.

  介绍了高固体含量乳液、粉末乳液、交联型乳液、非水介质乳液及IPN型乳液等的发展动向和我国聚合物乳液的现状。