片语

The plastics injection mold塑料注射模具

injection mould注塑模具

Injection and Mold注塑产品

injection blow mold注坯吹塑模

Plastic Injection Molding Mold塑料注塑模具

injection mold for thermoplastics热塑性塑料注射模

injection plastics mold注塑模具

covering injection mold注射模

Injection Plastic Mold注塑模具

英汉例句

• so the research on the parting surface design technology and method is becoming one of the important facets in the field of the injection mold cad.

  因此，分型面设计技术与方法的研究，成为注塑模具cad技术研究与开发的重要内容之一。

• this injection mold becomes a typical shape model of injection molds which need side molding shape.

  该注塑模具设计成为需要侧成型形状的注塑模具典范。

• according to the wide application of slide block design in injection mold, introduced in detail structure types and design points of injection mold slide block.

  针对注射模中滑块结构的广泛应用，详细介绍了注射模滑块的各种结构类型与设计要点。

• the biggest problem of large-scale injection mold design in the practical production is that designers have to face many problems, such as its long manufacturing cycle, high cost, and short life etc.

  在实际生产中，大型注塑模具设计碰到的最大困难是模具设计问题多、制造周期长、成本费用高和使用寿命短等问题。

• designed in accordance with the subject「s main task is the design of injection mold lid.

  根据题目设计的主要任务是盒盖注塑模具的设计。

• based on the analysis of the public data center of the injection mold product, product data exchange center about the mold union enterprises is developed.

  在对注塑模具产品公共数据中心分析研究的基础上，对模具联盟企业产品数据交互中心进行了研究与开发；

• then to little chardonnay mould group, little chardonnay mold production of all kinds of injection mold is the guarantee of quality, technical authority, product novelty.

  那就来小霞模具集团吧，小霞模具生产的各类注塑模具是质量的保证，技术的权威，产品的新颖。

• the molding process of refrigerator water receiver , structure and work process of injection mold are introduced in detail.

  详细介绍了冰箱接水盒注塑件的成型工艺及注射模的结构及工作过程。

• the cooling system of injection mold has significant effect on the quality of the plastic parts.

  注塑模具的冷却系统对塑料件的质量有至关重要的影响。

• design - manufacture and characteristics of the injection mold for reflector cas」e are introduced.

  介绍反射器壳体注塑模具的设计、制造及其特点。

• it specialized in a variety of injection mold design and manufacture.

  专业从事各种注塑模具的设计制造公司。

• with the globalization of the economy and the broad use of plastic products, the design and manufacture of injection mold is facing more and more requests.

  随着市场经济的全球化和塑料制品的广泛应用，对注塑模具的设计与制造提出了越来越高的要求。

• analyzed the technology characteristics of the barrette, introduced the injection mold structure and work principle.

  分析了发夹的工艺特性，介绍了发夹注射模的结构设计和工作原理。

• over the analysis to miner's lamp convex structure, and the problems existed in injection mold, injection mold structure of this kind of plastic parts and its working process are defined.

  通过对矿灯透镜产品结构分析，以及注射成型存在问题点，确定了该类塑件的注塑模具结构，以及模具工作过程。

• the injection mold cooling system design is very important to improve the mold design and manufacture of standard and quality of products.

  注塑模具冷却系统对于提高模具的设计制造水平和制品的质量是非常重要的。

• this paper introduced the injection mold design of the polyurethane elastomer.

  介绍聚氨酯弹性体的注塑模具的设计。

• the liquid silica rubber(lsr) had unique physical performance, through the liquid silica rubber injection mold design example, analyzed several attention points in designing injection mold.

  液体硅橡胶（l sr）具有独特的物理性能，通过液体硅橡胶注射模设计实例，分析了其注射模设计中应注意的几个问题。

• the subject of orange drums cup injection mold design, and to consolidate and deepen the learning, has been fairly satisfied with the results, achieved the desired design intent.

  本课题通过对中控盒挡板的注射模具设计，巩固和深化了所学知识，取得了比较满意的效果，达到了预期的设计意图。

• moreover, comparing to traditional mechanical analysis, this paper introduces the design of backing plate and provides a new method for the design of injection mold cavity.

  以注塑模垫板的设计为例详细阐述，并与传统力学分析对比，为注塑模具的型腔设计提供了一种新方法。

• analyzed the structure characteristics of the tip and penholder and molding technology, introduced the injection mold structure characteristics.

  分析了笔尖和笔桿的结构特点与成型工艺，介绍了该类零件的注射模结构特点。

• introduced design and manufacture methods of injection mold of injection nozzles for plastic buckets, described the mold working process.

  介绍了注胶桶的注胶嘴注射模的设计制造方法，并阐述了该模具的工作过程。

• this paper introduced the electronic clock back of the injection mold design process.

  本论文介绍了电子钟后盖的注射模设计过程。

• this paper introduces the application of agile manufacturing and the conception of the frame in injection mold development.

  介绍了利用敏捷制造的概念，进行注塑模具开发的初步探索，并构思了模具敏捷制造的框架结构。

• the results of application in injection mold show that the intelligent estimation method is effective and feasible.

  最后通过注塑模具设计应用表明了该智能预测方法的有效性和可行性。

• this paper presents the injection parts molding process and injection mold structural characteristics and operating process of refrigerator water box.

  介绍了冰箱接水盒注塑件的成型工艺特点及注塑模具的结构特点及工作过程。