片语

sand faced-iron mould casting铁型覆砂铸造

iron pattern casting铁模铸造

iron continuous casting铸铁水平连铸

cast iron continuous casting铸铁连铸

pig iron mould casting铁范铸造

Cast iron case casting箱体铸铁件

cast iron wheel casting铸铁轮类件

alloy iron jacket casting合金铸铁缸套

iron mould casting铁模铸造

英汉例句

• a fully-welded steel structure frame was successfully developed and applied to a bending machine to replace conventional iron casting structure.

  西安建筑科技大学粉体工程研究所成功地开发了一台卷板机，该卷板机机架采用全焊钢结构代替了传统的铸造结构。

• in this paper, the theories, principles and technologies of proportional solidification are introduced briefly which can be applied to the iron casting production.

  本文扼要叙述了均衡凝固的理论、原则和技术，可以作为生产应用的依据。

• influence of the initial temperature fields and mold hardness on the shrinkage defect of ductile iron casting by epc process was mainly investigated in this paper.

  本文主要讨论了初始温度场和铸型硬度对消失模铸造球墨铸铁件收缩缺陷的影响。

• i was founded in 1994, is a specialized in cast iron, cast steel, alloy cast iron, ductile iron casting processing units.

  我公司成立于1994年，是一家专门从事铸铁、铸钢、合金铸铁、球墨铸铁的铸造加工单位。

• the application of huazhu cae/intecast solidification simulation software to optimize foundry method of a nodular iron casting was introduced.

  介绍了铸造商品化软件华铸cae在优化球铁件铸造工艺中的应用。

• mainly oriented to iron casting big parts.

  主要致力于大件钢铁铸造产品。

• the practice proves that it is feasible to design gating system of heat resistant nodular cast iron casting by using large orifice discharge and moduli calculation method.

  证明采用大孔出流设计浇注系统，均衡凝固收缩模数法设计耐热球铁箱体类铸件的补缩系统是可靠的。

• the filling speed of lost foam cast iron casting was measured by use of an integrated set of experimental equipment and a specially designed computer acquisition system.

  研究了负压度、模样密度、浇注温度、金属静压头等工艺因素对消失模铸铁件充型速度的影响规律。

• buy gray iron casting from beijing junshenglang machine co. , …

  在与灰口铁相似的铸造技术下，球墨铸铁具有钢一样…

• the iron casting electroplated products are especially popular among the traders home and abroad.

  特别是铸铁类电镀产品，受到广泛国内外客商的喜爱。

• solidification simulation and shrinkage defect prediction of s. g. iron casting in sand lined metal mold;

  本文主要讨论了初始温度场和铸型硬度对消失模铸造球墨铸铁件收缩缺陷的影响。

• we also analyzed the facts influencing on iron casting cockle defect: patterns density, chemical composites pouring position of casting, temperature and speed of pour, casting structure etc.

  分析了影响铸铁件产生皱皮的几种主要因素：模样材料、合金的成分、浇注的温度和速度、浇注系统形式、涂料和型砂的透气性及铸件本身形状影响等。

• a third workshop employing stone moulds for iron casting has recently been found in huize county, yunnan province.

  最近在云南会泽县发现了第三处石范铸铁作坊。

• active action of pouring process at feeding of large scale cast iron casting is studied from some factors of pouring position and time and the cross section size of pouring system.

  从浇注位置、浇口尺寸、浇注时间几个侧面研究了浇注过程在大型铸铁件补缩中的能动作用；

• the production of gray iron casting without thermal aging was suggested.

  在调查分析的基础上，提出取消灰铁热时效的看法。

• this paper researched the microstructure characters on the cast-chromized layer of the iron casting and the steel casting by sem and energy spectrum.

  通过扫描电镜、能谱分析等方法，对铸铁件和铸钢件表面渗铬层的组织进行了研究。

• in the paper, based on the propotional solidification theory and large orifice discharge theory, the foundry technology of gray iron casting shell was designed by the method of cad.

  论文根据均衡凝固及大孔出流理论，用计算机辅助设计的方法改进了壳体灰铸铁件的铸造工艺。

• cupola is the main melting equipment for iron casting production. by rough statistics, there are more than 8000 of various melting rate cupolas in our industrial system.

  沖天炉是铸铁件生产的主要熔炼设备，据粗略统计我国工业系统约拥有各种熔化率沖天炉8000座以上。

• mathematical model of the microstructure as well as the mechanical properties of spheroidal graphite iron casting was researched on the basis of solidification and thermodynamics theories.

  根据结晶及相变动力学理论，建立了预测球墨铸铁件铸态组织及机械性能的数学模型。

• the influence of various process parameters on the liquid metal filling velocity in the mold was studied in gray iron casting produced by the expandable pattern casting with vacuum (epc v process).

  通过正交试验研究了铸铁件负压气化模铸造充型过程中各种工艺因素对金属液充型速度的影响。

• the results obtained by use of computer numerical simulation on the process filling the mould in demould cast for iron casting basically areconform to the measured values.

  给出了一种消失模铸造充型过程数值模拟的人工神经网络算法，利用计算机进行的铸铁件消失模铸造充型过程的数值模拟结果与相应的实测值基本一致。

• iron casting mill stand.

  铸铁厂的立场。

• the experience with improvement of the foundry method for a plate shaped nodular iron casting with weight of 1000kg was introduced.

  介绍质量1吨的球铁板形铸件的铸造工艺改进经验。