英语释义

1. the hard constituent that is the chief component of quenched steel

片语

martensitic stucture马氏体组织

fully martensitic全马氏体

martensitic transformation[材] 马氏体转变；马顿斯体式变化；麻田散体式变化

induced martensitic诱发马氏体

Martensitic steels[材] 马氏体钢

martensitic nucleation马氏体形核

martensitic range马氏体区域

martensitic stainless马氏体不锈钢

martensitic transition马氏体相变

martensitic effect马氏体效应

英汉例句

• Factorials design and Latin hypercube sampling design are applied in the high-speed milling experiments of martensitic stainless steel.

  综合应用析因试验设计与拉丁超立方抽样试验设计，对难加工材料马氏体不锈钢进行了高速铣削试验。

• Ion beam irradiation can affect the martensitic transformation and induce the amorphous transition by production, accumulation of defects and atomic disordering in alloys.

  粒子束辐照，将点缺陷引入合金，会对马氏体相变产生影响； 点缺陷和化学无序积累到一定程度，还会诱发扩散型晶体→非晶体转变。

• However, the martensitic matrix of high-chromium cast iron has excellent abrasion-resistant tissues, which used to be obtained only by means of heat treatment.

  具有马氏体基体的高铬铸铁，有理想的耐磨组织，但通常要通过热处理才能得到。

• The higher the peak temperature, the coarser the grain size of prior austenite, the larger the martensitic lath bundle after phase transformation.

  峰温越高，奥氏体晶粒越粗大，冷却后形成的马氏体板条束尺寸也越大。

• The SMA model arises from the conservation laws of momentum and energy, and describes martensitic phase transitions in one-dimensional shape memory alloys.

  形状记忆合金模型来自动能守恒定律，描述了一维形状记忆合金的马氏体相变。

• And the effects of incomplete transformation on martensitic and reverse transformation has been studied.

  并研究了不完全转变对正、逆马氏体相变内耗的影响。

• Precision processing is performed for martensitic stainless steel SUS440C by loose abrasive machining technique.

  利用游离磨粒加工方法对马氏体平面不锈钢SUS440C试件进行精密加工。

• The principle for the oil-quenching and tempering technology of two high chromium martensitic stainless steels is introduced.

  介绍两种高铬马氏体不锈钢的油淬火回火工艺原理；

• The recent advances of research of wear resistant steel including austenitic manganese steel, low alloy martensitic steel and bainitic steel are summarized in this paper.

  综述了抗磨钢包括奥氏体锰钢、低合金马氏体钢和贝氏体钢的最新研究进展。

• The results of metallograph, X ray diffraction, and resistance experiments confirmed that thermal elastic martensitic transformation could be showed in casting Cu Al Be alloys.

  结果表明，超声速度与合金相状态有关，而且对热弹性马氏体相变及其逆相变非常敏感。

• The microstructure reconstruction during the martensitic nucleation and growth processes was analysed.

  分析了马氏体形核和长大过程中系统微观结构的变化规律。

• It can be obtained that quantity of the martensitic transformation reduces with the increase of these factors.

  结果表明，随着这两个因子的增大，马氏体的转变量变小。

• Structural steels, Carbon content. Low-alloy steels. Ferritic and martensitic stainless steels.

  结构钢，碳钢，低合金钢，鉄素体和马氏体不锈钢。

• The mechanism of laser hardening is martensitic hardening and grain refining.

  激光相变硬化机理主要是马氏体强化和晶粒细化。

• In these films, it can be seen an obvious martensitic transition and a change of resistance as high as 1500% brought by martensite transition.

  在这些薄膜中，观察到明显的马氏体相变过程和高达1500%的相变诱导电阻变化率。

• The AFM observation of martensitic surface relief effect showed to be direct, accurate and vivid.

  AFM对马氏体相变形状应变特征的观测更直观、準确和真实。

• Could exponentially increase the corrosion resistance of martensitic stainless steel to improve the polishing performance of the workpiece.

  可成倍提高马氏体不锈钢的抗蚀性，提高工件的抛光性能。

• The hardness of quenched martensitic stainless steels increases with carbon content and it reaches a nearly invariant value as the carbon content in steels is higher than about 0.6%.

  马氏体不锈钢淬火后的硬度随钢中碳含量增加而增高，当碳含量达到0.6％左右后，钢的硬度基本上不再增高。

• This paper gives a survey of development and application of microalloyed engineering steels, including those with ferritic -pearlitic, bainitic, and martensitic structures.

  本文概述了非调质钢的开发和应用现状，其中包括铁素体一珠光体、贝氏体以及马氏体非调质钢。

• The inheritance phenomenon of precipitated V_4C_3 in martensitic transformation has been investigated by means of electron diffraction and matrix analysis.

  本文利用电子衍射和矩阵分析方法探讨了析出V_4C_3在马氏体相变中的遗传现象。

• Perspective in further study and applications of martensitic transformations was presented.

  对马氏体相变的继续研究和应用作了展望。

• The influence of carbon in martensitic matrix (by use different austenizing temperature) on two body abrasive and impact-abrasive wear resistance of ductile iron is studied.

  针对马氏体球铁，研究了马氏体基体不同含碳量（不同奥氏体化温度）对两体磨损和沖击磨料磨损耐磨性的影响。

• He invented the metal alloys stellite and martensitic stainless steel and designed one of the earliest automobiles in the United States.

  他发明了哈氏合金以及马氏不锈钢，设计出了美国最早的汽车之一。

• A low carbon martensitic spring steel has been developed to meet the requirements of variable-cross-section plate spring for trucks.

  为适应变截面汽车板簧用材所需，研制了一种低碳马氏体型弹簧钢。

• The heat flux generated in grinding is utilized to induce martensitic phase transformation in the surface layers of components, such as that achieved by other surface strengthening processes.

  磨削淬火技术是利用磨削热对工件表面进行热处理，使工件表层发生马氏体相变，达到与表面强化处理一样的性能。

• Various influence factors were analyzed in detail on nitriding distortion of the piston rings made of martensitic stainless steel based on abundant researches.

  在大量试验的基础上，深入分析并研究了马氏体不锈钢活塞环渗氮畸变的各项影响因素。

• The magnitude and direction of lath martensitic shape strain is firstly measured by a new interference method in this research.

  利用干涉显微镜首次测得了板条马氏体形状应变的大小及方向。