英语释义

1. a test for determining a mechanical property

片语

Mechanical Environment test机械环境测试

mechanical ability test机械能力测验

Mechanical Dynamic Test Instrument机械动态测试仪

Mechanical Shock Test机械沖击测试

mechanical performance test机械性能试验

mechanical aptitude test智能测验

mechanical endurance test机械寿命试验

Mechanical Life Test机械寿命测试

mechanical separator test机械试验

英汉例句

• mechanical test results must be evaluated in conjunction with catalyst activity, selectivity, and stability data.

  必须将机械测试结果和催化剂活性、选择性和稳定性数据联系起来进行综合评价。

• on this basis, the triaxial compressive test of coal sample is done using mts815 servo-controlled rock mechanical test system.

  采用mts815巖石伺服试验系统进行了煤样三轴压缩试验。

• the rock mechanical test results obtained in calendar years are summarized, and analysed from tests and geological conditions.

  对历年巖石力学试验成果进行了汇总，并根据试验和地质条件进行了分析整理。

• the metallurgical structures, mechanical properties and fractographs of eb welded 6061-t6 aluminum alloy joint were studied by means of metallography, mechanical test and sem technology.

  通过金相技术、力学性能试验和sem技术研究了6061-t6铝合金真空电子束焊接接头的金相组织、力学性能和断口形貌特征。

• this is the first study using a standardised mechanical test on hip protectors and allows an objective comparison because only mechanical properties are tested.

  这是第一次用标準方法对臀部保护装置进行研究，并且用两组客观的材料进行对比。

• by carrying through physical and mechanical test of sand-sliding samples, granularity composition of sand-sliding, which mainly made up of medium sand, coarse sand and talus debris are found.

  对溜砂坡砂样进行有关物理与力学试验，得出溜砂坡的粒度成分以中、粗砂和角砾为主；

• through mechanical test and chemical analysis and technological experiment of the cracked cap nut, it was concluded that the short size of nut blank caused surface crack.

  对开裂杯形螺母的力学性能和化学成分进行了检验分析，并进行了工艺试验。结果表明，毛坯尺寸偏短是造成开裂的主要原因。

• mechanical test results showed when the content of ppc was up to 20%, the yielding point, necking and strain-whitening could be observed during tensile process.

  力学测试结果表明，当ppc质量分数超过20%时，可以看到明显的屈服点。

• cast iron plate is crossed, surveying, welding, tooling process can not be a lack of bench, cast iron plate can also do mechanical test stand, and so on.

  铸铁平板是划线、测量、铆焊、工装工艺不可以缺少的工作台，铸铁平板也可以做机械试验台，等等。

• the mechanical performance test machine is for the mechanical test on the coating material to obtain corresponding load shift curve automatically;

  光学摄像仪可任意从两个方向拍摄涂层试样在试验中裂纹的萌生及扩展图像，所获取的图像与载荷位移曲线对应；

• the calculation and analysis results of key steel structures are obtained. the correctness of the theoretical analysis is verified by mechanical test on some important points of the beam.

  得出主要钢结构的计算分析结果，并对其关键部分进行力学测试，验证了理论分析的正确性。

• the results of mechanical test show that elongation is improved by tempering below 250 ℃, but the change of other mechanical properties is not obvious.

  力学性能测定结果表明，250 ℃以下的低温回火，对改善双相钢的伸长率具有良好作用，但是其它力学性能的变化不明显。

• the mechanical test on 「v」string insulators was performed on composite insulators for investigating the long term buckling effect on composite insulators.

  为研究「v」形串中复合绝缘子长期运行受压对绝缘子性能的影响，进行了「v」形串复合绝缘子的受力试验。

• methods the cadaveric bone was used for a mechanical test of intertrochanteric fracture fixed with a multi-axis bond.

  方法用尸骨作万向接头铆固转子间骨折标本力学测试；

• mechanical test of base metal and weld metal revealed no degradation of tensile properties.

  拉伸试验结果表明，母材和焊缝金属的抗拉性能没有劣化；

• the article studies the electromechanical interface of portable mechanical test system controlled by microcomputer.

  本文对微机控制便携式拉压试验系统的机电接口进行了深入的研究。

• mechanical tests several types of mechanical test were performed in order to investigate the effect of the stress state on the austenite transformation rate and on the resulting work hardening.

  机械性能测试为了研究应力状态对于奥氏体转变速率和加工硬化结果的影响，我们进行了几种机械性能方 面的试验。

• the permeability test of coal in the complete stress-strain process is carried on the mts815 servo-controlled rock mechanical test system.

  在mts815巖石伺服试验机上进行了煤巖全应力-应变过程中的渗透性试验，揭示了煤巖在变形破坏过程中的渗透率变化规律。

• mechanical test showed: the shape of load-extension diagram of sis is just like that of collagen.

  力学测试结果显示：sis的载荷-伸长曲线的形态符合胶原纤维的载荷-伸长曲线。

• the properties of plain carbon fabric prepreg were researched using a picture frame shear rig which is(installed) on a mechanical test machine.

  利用安装在拉伸试验机上的像框剪切装置，研究了平纹预浸碳纤维机织织物的剪切行为。

• static mechanical test is a direct approach to obtain these parameters, but it is often difficult because of its heavy equipment, long duration, and high expense.

  然而，静力学试验测试往往是设备笨重、耗时耗力、成本昂贵。