片语

melt-spinning fiber熔纺纤维

melt direct spinning process熔体直接纺丝工艺

grid melt-spinning炉栅纺丝

plasticized melt-spinning塑化熔体纺丝

melt direct spinning熔体直纺

melt-spinning process熔纺工艺

melt polymerization spinning熔融纺丝

Melt-spinning alloy雾化合金

英汉例句

• this paper is mainly concentrated on the introduction to prepare pan based carbon fibers and their special fabrication method from a melt spinning to prepare the precursor fibers.

  笔者主要介绍了聚丙烯腈基碳纤维的制备工艺概况，特别介绍了熔融纺丝路线制备聚丙烯腈原丝的方法。

• a new type of fe-based amorphous alloy containing rare earth element was prepared by melt spinning technique.

  利用旋铸技术制备了一种新型的含稀土元素的铁基非晶合金。

• hard elastic polypropylene fibre samples were made by melt spinning isotactic polypropylene with melt indexer, followed by fast winding and annealing.

  将聚丙烯树脂在熔融指数仪上熔融挤出、快速牵伸并退火处理，制得了硬弹性聚丙烯纤维。

• we briefly describes the preparing and properties of the non- plasticate melt spinning pan fibers as well as the resin that it made from.

  综述了聚丙烯腈纤维的熔融纺丝工艺，主要介绍了非增塑融纺的聚丙烯腈树脂及纤维的制备方法和性质。

• the quenching equipment, quenching technique of melt spinning and the progress on the research of computer simulation of melt spinning quenching process are introduced.

  介绍了熔融纺丝的吹风冷却装置、吹风技术及熔纺冷却过程的计算机模拟研究的新进展。

• the spinning methods of spandex are dry spinning , wet spinning , chemical reaction spinning and melt spinning . the output of dry spinning can reach 80%of spandex total output in the world .

  氨纶的纺丝方法有干纺、湿纺、化学反应纺丝和熔融纺丝法，干纺产量占世界氨纶总产量的80%。

• polypropylene granulate add master batch of disperse dyes as raw to make dyed modified polypropylene fiber by polyblending melt spinning method.

  以聚丙烯切片及添加分散染料的可染母粒为原料，采用共混熔融纺丝方法制备染色改性丙纶。

• the rheological property of polycarbosilane(pcs) spinning melt is studied with self-made single-orifice melt spinning system.

  采用自制单孔熔融纺丝系统，对熔融纺丝状态时聚碳硅烷（pcs）的流变特性展开了研究。

• polyoxymethylene fibers were obtained by high-speed melt spinning with laser irradiation heating near the spinneret, meanwhile the thinning behavior was examined by on-line measurement.

  聚甲醛纤维是由高速附近的喷丝头的激光照射加热熔融纺丝获得的，同时变薄的行为进行了检查，在线测量。

• the structural characteristics of the polymer feedstock, polyurethane and polyether ester, practicable for elastic fiber melt spinning were described.

  阐述了适于弹性纤维熔融纺丝的聚合物聚氨酯和聚醚酯的结构特点；

• polypropylene is the trade name of polypropylene fiber, which is by the polymerization of propylene as raw material by the melt spinning of fibers obtained.

  丙纶是聚丙烯纤维的商品名称，它是由丙烯作原料经聚合、熔体纺丝制得的纤维。

• by using the frequency converting speed regulating system the requirements of melt spinning on electric transmission were satisfied.

  采用变频调速系统可以满足熔体纺丝对电气传动的要求。

• spinning box is an important part of the melt spinning machine for synthetic fibre.

  纺丝箱体是合成纤维熔融纺丝机中的一个重要部件。

• effect of heat treatment time at 80 ℃ on melt spinning polyester polyurethane fiber which produced by prepolymer is discussed.

  讨论预聚体法生产的熔纺酯型聚氨酯纤维在80℃下热处理时间对其性能的影响。

• filaments prepared by melt spinning of peet/pet blend (83/17, by weight) show only the peet component has been crystallized.

  以peet/pet混合比为83/17的混合系进行共混纺丝制得的纤维，只有peet一种成分发生结晶。

• microporous polypropylene hollow fiber membranes were prepared by the melt spinning and cold stretching (mscs) method.

  采用熔融挤出拉伸法制备了聚丙烯中空纤维膜。

• microporous polypropylene hollow fibrous membranes may be prepared by the melt spinning and cold stretching (mscs) or thermally induced phase separation (tips) method.

  对熔融纺丝-冷却拉伸与热致相分离两种制备微孔聚丙烯中空纤维膜的意义、原理、过程、影响因素等进行了评述。

• it was found that shear rate increased with increase of melt spinning temperature and extrusion flow.

  随熔纺温度及挤出流量的增加，中间相沥青在喷丝板微孔区内的剪切速率相应增加。

• the methods and developments of fabricating functional fibers containing nanoparticles by electrospinning and melt spinning were reviewed.

  阐述了采用静电纺丝和熔体纺丝法制备含纳米粉体功能性纤维的方法及其研究现状。

• application of non polyurethane, polyester polyurethane, polyether polyurethane and chain extender on the melt spinning of elastic fiber is introduced .

  介绍了非聚氨酯类、聚酯型聚氨酯类、聚醚型聚氨酯类聚合物及扩链剂在熔纺弹性纤维上的应用。

• by means of fuji melt spinning tester type-c, the rheological behaviour and filtration properties of four kinds of pet chips made by different manufacturers are studied.

  利用富士c型熔融纺丝机研究了四种pet切片的熔体流变行为及过滤性能。 对四种不同厂家生产的pet切片的可纺性进行了比较。

• the development, preparing technology and application of hollow fiber were generalized. the technologies of melt spinning and wet spinning of hollow fiber were introduced.

  概述了中空纤维的发展过程、制备技术及其应用，具体介绍了现有中空纤维的熔融纺丝、湿法纺丝技术，指出中空纤维将会有很广阔的发展前景。

• the advantages and shortcomings of melt spinning for spandex were compared with dry spinning.

  对熔融纺丝法和干法生产氨纶的优缺点进行了比较；

• it uses nanotechnology to powder of bamboo charcoal particles, the melt spinning at the carrier made of polyester, has excellent deodorizing, thermal storage, humidity and other health functions.

  它利用纳米科技将竹炭颗粒微粉化后，熔融于涤纶载体纺丝而成，具有优异的消臭、蓄热、调湿等保健功能。

• melt spinning tester, pilot fiber plant, filament trial equipment.

  纺丝实验机，化纤试验设备，小型生产线。

• the influences of formation condition and draw ratio in melt spinning on the hollowness of circular cross section hollow polyester fiber are studied.

  本文就熔融纺丝成形条件及后拉伸倍数对圆中空聚酯纤维中空度的影响进行了探讨。