片语

microcrystalline cellulose pellet微晶纤维素丸芯

Microcrystalline cellulose composite微晶纤维素复合物

microcrystalline cellulose membrane微晶纤维素膜

Microcrystalline Cellulose PH 101微晶纤维素PH

nano-microcrystalline cellulose纳米微晶纤维素

Microcrystalline cellulose plate微晶纤维素板

Microcrystalline Cellulose PH 102微晶纤维素PH

microcrystalline cellulose powder微晶型纤维素粉

microcrystalline cellulose membranes微晶纤维素膜

英汉例句

• methods:the effects of dextrin, cms-na, microcrystalline cellulose and l-hpc on the quality of ginkgo flavone tablets were studied.

  方法：考察糊精、羧甲基淀粉钠、微晶纤维素和低取代羟丙基纤维素对银黄酮片的质量影响。

• through experiment research , microcrystalline cellulose and cms-na were selected as molding materials. the proportion of microcrystalline cellulose was 15%, cms-na was 3 % .

  试验优选了以微晶纤维素、羧甲淀粉钠为成型辅料，用量分别为15%、3%。

• results: the composition of the choice breaking agents is 5% of cross-linked polyvinylpyrrolidone, 40% of microcrystalline cellulose and 15% of low-replacing hydroxypropyl cellulose.

  结果：优选的崩解剂组成为：交联聚乙烯吡咯烷酮5%，微晶纤维素40%，低取代羟丙基纤维素15%。

• microcrystalline cellulose (mcc) was found to be the best stabilizer, whereas the carboxymethyl cellulose (cmc), xanthan gum and sodium alginate could be synergic.

  羧甲基纤维素（cmc）、黄原胶和海藻酸钠三种胶与mcc都有协同作用。

• due to its excellent compactibility , microcrystalline cellulose is one of the most preferred filler-binders in direct compression tablet formulations.

  微晶纤维素由于其良好的成锭性，为目前直接打锭剂型最常使用的赋形剂之一。

• results:the optimized formulation was composed of microcrystalline cellulose 20%, cross-link polyvinyl pyrrolidone 6%, sodium carboxymethyl starch 5.5% and polyvinyl pyrrolidone 8%.

  结果：优选的最佳处方为微晶纤维素20％、交联聚乙烯吡咯烷酮6％、羧甲基淀粉钠5．5％和聚乙烯吡咯烷酮8％。

• the technology of microcrystalline cellulose from soybean hulls was obtained by a lot of experiments made in labs in this paper. acidolysis of soybean hulls was the main preparation method.

  探讨了在实验室条件下，采用酸水解法处理豆皮制备食用微晶纤维素的工艺条件。

• the main physical and chemical properties and practical application of microcrystalline cellulose are described.

  介绍了微晶纤维素系列产品在国民经济中的应用。

• pellets using microcrystalline cellulose (mcc) as matrix and water as adherent were prepared by a new style extrusion spheronization equipment.

  采用新型的挤出-滚圆装备，以微晶纤维素为辅料，水为粘合剂制备非载药微丸。

• ether of microcrystalline cellulose-based picric acid(mcc-pa) was prepared from microcrystalline cellulose by the reactions of epoxidation and etherification.

  以微晶纤维素（mcc）为原料，经环氧化和醚化反应，制备了纤维素衍生物——纤维素苦味酸醚（mcc-pa）。

• the microcrystalline cellulose (mcc) gel can be formed by the mechanic shear force on the microcrystalline cellulose suspension.

  微晶纤维素悬浮液在机械力的作用下发生微纤化而形成胶体。

• results: microcrystalline cellulose and starch are the best filler, sodium carboxymethyl starch is the best disinteg-rant, and all the indicators are accorded with chinese pharmacopoeia.

  结果：填充剂以微晶纤微素、淀粉，崩解剂以羧甲基淀粉钠效果最佳，各项指标均符合中国药典。

• results:the optimized formula dosage of microcrystalline cellulose and crospolyvinylpyrrolidone were40%and10%respectively;

  结果：微晶纤维素与交联聚乙烯吡咯烷酮的最佳处方用量分别为40%、10%；