片语

Mixed Flowing GasMixed flowing gas is a type of environmental testing for products, particularly electronics, to evaluate resistance to corrosion due to gases in the atmosphere. The product is exposed to gases such as chlorine, hydrogen sulfide, nitrogen dioxide, and sulfur dioxide at levels in the parts per billion range, in a controlled environmental chamber.

mixed d gas producer混合煤气发生炉

mixed packing gas chromatography混合填充物气相色谱

mixed water gas混合水煤气

Industrial Mixed Flowing Gas工业用混合流动气体

Mixed-gas test混合气体测试

drilling mixed with gas空气鉆井

mixed-gas diving混合气潜水

英汉例句

• According to the different welding materials, if adopts the carbon dioxide gas or mixed gas to be the protective medium to carry out the welding.

  根据焊接材料的不同，可采用二氧化碳气体或混合气体作为保护介质进行焊接。

• Calculation method of viscosity for pure gas, mixed gas and liquid at ambient pressure is discussed.

  介绍常压下纯气体及混合气体，加压下纯气体及混合气体以及液体粘度的计算方法。

• The practice shows this control method can achieve stable mixed gas supply and ensure the economic running for relay gas pressing station finely.

  实践证明这种控制模式能够较好地实现中继气体加压站稳压供气和节能运行。

• In this study, a multi wavelength analysis method was applied to the temperature measurements of a butane air mixed gas flame.

  在研究中，多波长分析方法用于丁烷-空气混合气体燃烧火焰的温度测量。

• In this article, the main influencing factors on condensation heat transfer include air flow rate, coolant flow rate, coolant inlet temperature and mixed gas velocity.

  在本课题中，影响传热过程的因素主要有空气含量、冷却水流量、冷却水温度及混合气气速。

• With the improvement of the speed and processing capability of integrated circuits, it is feasible to apply the embedded chips into mixed gas recognition systems.

  随着现代集成电路速度和处理能力的提高，使得把嵌入式芯片应用于混合气体识别系统中成为可能。

• The weldability of AZ31 magnesium plate by He-Ar mixed gas tig welding was investigated. The welding process parameters for AZ31 plate with a 3 mm thickness were optimized.

  探讨氦-氩混合气体保护下tig焊接az31镁合金板的可焊性，对其焊接工艺参数进行确定。

• The mixed gas metal arc welding process is used for the first time by DFEM in the discharge chamber of the hydraulic turbine exported to Syria's Tishrin.

  东方电机股份有限公司首次采用混合气体熔化极气体保护焊焊接水轮机转轮室，并且在出口叙利亚的迪什林水轮机中应用。

• Adsorption of mixed gas not only is related to the temperature and pressure, but also changes as the gas composition changes, because exists the so-called 「Competing adsorption phenomena」.

  混合气体吸附不仅与温度、压力有关，而且随气体组成而变化，存在所谓竞争吸附现象。

• Natural gas in wellbore is a mixed gas consisting of various gas. Due to molecular weight of all kinds of gas is different, they will occur gravity segregation under the action of gravity field.

  井筒内的天然气都是由多种气体组成的混和天然气，由于气体各组分的分子量不同，会在重力场作用下发生重力分异，从而使井筒内混和气体的性质与单一气体有很大差异。

• The simulation result can describe the temperature field and the distribution of volume fraction of mixed gas in methanol reforming reactor.

  模拟结果可以直接表征反应器内的温度场、气体组分体积分数分布。

• So puts forward adopting mixed gas or taking heating SF6 gas to solve SF6 breaker reliable operation in rigid area.

  为此，提出了采用混合气体，或者采用加热SF6气体的方法，解决高压SF6断路器在严寒地区可靠运行的问题。

• A method of mixed gas component infrared spectrum recognition based on SVM regression model.

  基于SVM的混合气体红外光谱分析关键技术研究。

• The He-Ar mixed gas TIG welding for AZ31 magnesium alloy plate by was carried out. The surface of observed joint is smooth free from heap high and appearance defects.

  在氦-氩混合气体保护条件下，对AZ31镁合金板材进行了TIG焊接，获得了表面光滑、无堆高和无变形等缺陷的焊缝。

• The application of Ar-CO2 mixed gas in the welding of low-carbon steel could improve welding process, increase welding quality and decrease welding cost.

  CO2混合气应用在低碳钢焊接上，可以改进焊接工艺，提高焊接质量，降低焊接成本。

• As the normal suppression method, pure helium is gradually replaced with He-Ar mixed gas for economical efficiency, especially the he content is more than 50%.

  常用的抑制方法是侧吹氦气，而采用氦氩混合气体可降低生产成本，特别是当氦气含量高于50%时。

• A cascade control method for the pressure control of the mixed gas is presented based on an electro-hydraulic control valve.

  针对该问题，提出通过电液调节阀对混合煤气进行串级稳压控制。

• Taking the He-Ar mixed gas as protected atmosphere, TIG welding process parameters for AZ31 magnesium alloy plates was optimized by using the method of the orthogonal experiment and variance analysis.

  以氦-氩混合气体为保护气氛，采用正交试验和方差分析的方法，对AZ31镁合金板材进行了TIG焊工艺参数的优化。

• The total pressure of mixed gas equals to the summation of partial pressure of each composition.

  混合气体的总压力是各组成气体的分压力的总和。

• The results show that the fluctuations in calorific value and pressure of mixed gas can be kept at a low level, and has strong anti-disturbance ability against the extemal interference.

  研究结果表明：混合煤气热值和压力的波动能稳定在较小的范围之内，同时具有较强的抗干扰能力。

• The paper describes the mechanism of complex correction for the measurement of flow-rate of mixed gas and the implementing method of automatical correction.

  本文叙述了混合煤气流量测量的综合订正机理，以及自动订正的实施方法。

• Some improvements are introduced with the emphasis on the internal structure, the reinforced board of the case and the mixed gas insulation, etc.

  本文着重介绍该产品的内部结构、外壳筋板结构和混合气体绝缘等几点改进。