片语

passive state film钝化层

iron passive film铁钝化膜

rebar passive film点蚀核

passive film is breakdown钝化膜破坏

the passive film钝化膜

passive film on iron对铁的钝化膜的

put off passive film脱钝

passive hybrid film integrated circuit[电子]

surface passive film表面钝化膜

英汉例句

• it showed that good anticorrosion is attributed to homogeneous amorphous structure of ni-mo-p alloy and protective passive film formed on the surface of alloy.

  结果表明，合金结构的非晶态性和合金表面易生成耐蚀性优异的钝化膜，是分别使不同成分合金镀层耐蚀性优异的重要原因。

• the alkaline buffer solution reacts with the welding points to form a passive film on the surface of the welding points.

  所述堿性缓沖溶液与所述焊接点反应而在焊接点表面形成钝化膜。

• the modeled results also show that the ability to simulate corrosion of materials with surface passive film to some extent depends on their corrosion kinetics process tested by experiments.

  计算结果同时也表明，对于表面覆盖有钝化膜的材料的数值模拟，建立合理的流动腐蚀动力学模型是数值计算方法应用成功与否的关键。

• chemical treatments, such as sodium dichromate solutions, may facilitate the more rapid formation of the passive film on a stainless steel surface already free of scale or foreign matter.

  化学处理，例如重铬酸钠溶液，可以促进无氧化膜和杂质不锈钢表面的钝化膜更快速度的生成。

• influences of components in the passivating solution on film-forming rate and corrosion resistance of passive film we…

  研究结果表明，采用该种钝化液获得的钝化膜油黑发亮，色泽均匀，耐蚀性及耐磨性好，附着力强。

• passive film of alloys was investigated with aes analysis.

  用俄歇能谱aes分析了合金钝化膜的组成。

• discussion—stainless steels are autopassivating in the sense that the protective passive film is formed spontaneously on exposure to air or moisture.

  论述——在某种意义上说，在暴露到空气和湿气的情况下，保护性的钝化膜自动生成是不锈钢在自动钝化。

• the effectiveness of protection of passive film in different solution are sometimes more crucial to determine the corrosion behavior.

  钝化膜在不同介质中保护效率的差异，有时候也会起到决定性的作用。

• at the initial stage, the pitting cores are formed and the passive film is repaired continuously, which results in the inductive component in the electrochemical impendence spectrum.

  在初始阶段，形成的点蚀芯连续被修复的钝化膜，这会导致在电感元件中的电化学阻抗谱。

• original polymerization potential of aniline had related with the passive film of stainless steel.

  不锈钢表面钝化膜影响苯胺聚合的起始电位。

• in addition, the passive film guarantees the good appearance of the welding points, and simultaneously provides good reliability and high testability for electronic products having the welding points.

  另外，所述钝化膜确保了所述焊接点具有良好的外观，同时提供了具有所述焊接点的电子成品好 的可靠性以及高的可测试性。

• sem showed that sample surface of passive film was grid, and crack was branch-type, and sediment on passive film was bloom shape.

  扫描电镜显示，试样表面的腐蚀产物膜呈网格状，裂纹呈树枝型，腐蚀产物膜上的沉积物呈花朵状；

• the results indicate that the photocurrent i_(ph)increases when the passive film is breakdown.

  结果表明：钝化膜破坏后光电流增加；

• the passive film may be augmented by chemical treatments that provide an oxidizing environment for the stainless steel surface.

  通过为不锈钢表面提供一个氧化环境的化学处理，钝化膜可以得到增强。

• corrosion of stainless steel on the surface that is fully shielded from air such that the passive film cannot be created to resist the corrosion.

  不锈钢的表面发生的与空气完全隔离的腐蚀，因此保护膜无法生成来阻止腐蚀的发生。

• with double potential-step method, the thickness of passive film on zn electrodes in alkaline electrolyte is determined.

  作者用「二级电势跳跃法」测量了锌电极上钝化膜的厚度。

• the results indicate that the inhomogencity of the passive film and the conditions of solution within the crevice have a great effect on the initiation of crevice corrosion.

  实验结果表明，不锈钢钝化膜表面的性质与缝内溶液的状态是影响缝隙腐蚀诱发过程的两个重要因素。