片语

peel resistance strength抗剥离强度

peel strength test引张试験

peel l strength剥离强度

peel adhesive strength剥离粘接强度

peel-strength adhesion脱波强度附着

Peel bond strength粘着强力

Peel adhesion strength剥离强度

英汉例句

• thus, there can be provided a leather-like sheet material that excels in abrasion resistance and also in peel strength and flexibility, and provided a process for producing the same.

  根据本发明提供耐磨性好、同时剥离强度与柔 软性好的皮革样片状物及其制造方法。

• main application and characteristics: mixing with cr grafted adhesive to improve peel strength and resistant of heat, cold, and moisture .

  用途及特性：配合药水糊使用，提高粘接力，增加耐热、耐寒、耐水效果。

• in connection with the adhesive film, its mechanical property was dependent upon molecular weight of polyester polyol; and its peel strength was upon molar ratio of nco/oh.

  讨论了聚酯多元醇分子量对胶膜力学性能的影响，nco／oh（摩尔比值）对剥离强度的影响；

• the effect of different surface treatment on peel strength of substrate has been investigated.

  研究了不同的表面处理方法对基板金属化剥离强度的影响规律。

• the adhesive is nontoxic and has excellent peel strength to sbs materials and leather.

  所制胶粘剂对sbs材料和皮类材料具有良好的粘接效果。

• tightsen structural adhesives have excellent tensile, shear and peel strength combined with maximum impact, stress and vibration resistance.

  泰盛结构胶具有较强的拉伸、剪切与剥离强度，耐沖击、耐压、抗振动。

• the hygroscopicity, t_g, viscosity and t-style peel strength of the films made with copolymer pua and blend pua were studied.

  考查了共聚型和共混型pua乳液胶膜的吸水性、热行为、黏度、t型剥离强度。

• the effects of n-methyl pyrrolidinone(nmp) on viscosity and stability of aqueous polyurethane emulsion, water absorbing ratio, contacting angle of glue film and t peel strength were studied.

  研究了n-甲基吡咯烷酮（nmp）对水性聚氨酯乳液的粘度、稳定性、胶膜的吸水率、接触角、复合薄膜t剥离强度的影响。

• main application and characteristics: mixing with pu adhesive to improve peel strength and resistant of heat, cold, and moisture.

  用途及特性：配合pu胶、药水糊，能提高粘接力，增强耐热、耐水、耐寒效果。

• the effect of the residual stress on the peel strength p/b is discussed.

  实验结果还表明，膜内残余应力的存在降低了剥离强度。

• feature:aluminum foil backing, good peel strength and low tack, adaptability to weather condition and extreme temperature…

  特性：以纯铝箔为基材，剥离强度高、初粘性好、内聚力强、耐候性好、耐高低温性能好。

• besides, the effects of different ways of addition of the initiator bpo in the copolymerization on the peel strength are discussed.

  此外，还探讨了引发剂bpo的添加方式对剥离强度的影响。

• with polyether polyurethane as the main body the hot melt adhesives has good flexibility, poor adhesive peel strength and heat resistance.

  以聚醚为主体的聚氨酯热熔胶虽然柔韧性得到改善，但胶黏剂的剥离强度，耐热性又较差。

• high peel strength which builds on aging.

  抗剥离强度高，随时间变化而变化；

• this paper introduces a new copper foil adhesive for bakelite paper laminate. the adhesive raises the comparative tracking index (cti), proof welding, peel strength of the laminate.

  本文介绍了一种新的覆铜板铜箔胶粘剂，应用于酚醛纸板上，具有较高的耐漏电起痕性；

• peel strength between aluminium and the grafted polyethylenes was measured .

  其中酸酐功能化的聚乙烯与铝的粘结强度最高。

• the hot-melt moisture cure pu adhesives have been prepared. the effects of the structure of the mdi-polyether prepolymer, tackify resins on peel strength of the adhesives have been studied.

  本文制备湿固型mdi- 聚醚基聚氨酯热熔胶，研究了mdi-聚醚预聚物结构、增粘树脂等对胶粘剂剥离强度的影响。

• the results show that there have higher peel strength between adhesive tape and polyester or polyamide. it is applicable for bonding the end of zipper cloth base.

  实验结果表明，尼龙热熔胶与涤纶或尼龙布基有良好的剥离强度，可应用于拉链布基末端的粘。

• shear strength and peel strength reached optimum value when the dosage toughening agent q is 15-20 parts and curing agent is 21-24 parts.

  当增韧剂q含量在15~20份（质量）时，固化剂在21~24份（质量）时，胶黏剂的剪切强度和剥离强度最佳。

• waterborne acrylic pressure- sensitive adhesives (psas) with low peel strength were prepared by the semi - continuous emulsion polymerization.

  采用半连续乳液聚合法制备了一种丙烯酸类水基型低剥离力压敏胶。

• it is designed for applications that require a very fast cure at low temperatures. it can be used for high throughput production processes and applications where high peel strength is desired.

  该产品具有低温快速固化的特点，适合于快速高产及需要高剥离强度的应用场合。

• the results showed that t peel strength had a maximum when the dosage of the curing agent increased, and t peel strength also changed with various cured temperature or time;

  结果表明：随着固化剂用量的增大，复合薄膜t剥离强度呈现出先增大后减小的变化趋势，熟化时间和熟化温度也影响复合薄膜的t剥离强度；