片语

plane residual stress平面残余应力

plane-stress state平面应力状态

plane contact stress平面接触应力

plane plastic stress平面应力

principal plane of stress应力主平面

plane-stress method平面应力法

plane e stress平面应力

plane strain stress state平面应变应力状态

plane of stress fracture平面应力断裂

英汉例句

• For the plane stress problem of fixed end orthotropic beams subjected to uniform load, the analytical solutions of stress and displacement were resolved.

  针对均布载荷作用下正交各向异性梁在两端固支条件下的平面应力问题，求解了应力和位移的解析解。

• Results also show that the scale effect in plane stress state is slightly stronger than that in plane strain state.

  并发现在平面应力状态下，梁的梯度效应略强于平面应变状态。

• Complex number method for plane stress analysis and plane strain analysis is proposed by means of introducing the concepts of stress complex number and strain complex number in this paper.

  通过引入应力复数和应变复数的概念，提出了平面应力分析和平面应变分析的复数方法。

• Based on the fundamental equation of an anisotropic rectangular plate in plane stress problem, an accurate general displacement solution is obtained.

  根据各向异性矩形板平面应力问题的基本方程精确地求得了位移函数的一般解。

• The state space method coupled with the technique of differential quadrature (SSDQM) was presented for plane stress problems.

  针对平面应力问题，提出了利用状态空间法和微分积分法的混合解法（SSDQM）。

• The dynamic disturbance can be simplified as plane stress wave under certain conditions.

  在一定条件下，动力扰动可简化为平面应力波。

• This paper presents the material models for the plane stress problems of R.

  本文建立了钢筋混凝土墻板构件平面应力问题的材料模型。

• Shear band formation due to void nucleation and growth were successfully simulated in a specimen of geomaterial under plane stress compression and tension by the model respectively.

  采用该模型，成功地对平面应力条件下巖土材料单轴受压和单轴受拉试件的局部化破坏分别进行了数值模拟。

• This paper deals with computation of elastic Plastic F. e. m. for this centre cracked plate by ADINA Program. The computing result for this plate of plane stress model and test result were very close.

  本文论及针对这种试板，调用ADINA程序进行弹塑性有限元分析，平面应力模式下的计算结果与实际测试结果十分接近。

• The approach is based on the assumption that necking mode can be modeled under plane stress conditions and shear localization can be modeled under plane strain conditions.

  这种方法是以一种假设为基础的，即可以在平面应力条件下仿照缩颈模式和在平面应变条件下仿照剪切定位，材料是用弹、粘塑性物质构成的仿制品。

• Secondly, the equivalent plane truss element analysis program of plane stress problem is worked out, by which cantilever beam, simple beam and perforated wall are analyzed.

  其次，编制了平面应力问题等效铰结平面桁架单元有限元法分析计算机程序。

• The state equation of Pieoelectric beam is deduced directly from a piezoelectric physical equation in terms of a plane stress problem.

  按平面应力问题，直接从压电物理方程出发，导出了压电梁的状态方程。

• In the limiting case of plane stress conditions the assuned stresses also satisfy the compatibility conditions.

  当退化至平面应力状态时，此应力场也满足协调方程。

• This paper USES principal curvature, plane stress and structure filtering to evaluate the development of fracture at geology shape, mechanical and signal handle facet.

  本文应用主曲率分析技术、平面应力分析技术、构造滤波技术，从地质形态、力学角度、信号处理的角度给出了地质构造的裂缝发育评价。

• Its efficiency was demonstrated by computing the limit load factor and the collapse state for some plane stress and plain strain problems.

  通过计算平面应力和平面应变问题的极限荷载因子和相应的坍塌机构，验证了算法的有效性。

• The J integral values in the vicinity of the crack tip in welded joints were numerically analyzed by using the plane stress elastic-plastic finite element method.

  采用平面应力弹塑性有限元法研究了含有多部损伤的焊接接头裂纹尖端J积分的变化规律。

• The limit load formulae of single-edge deeply notched plates with round ends subjected to pure bend moment and tensile load under plane stress condition have been derived.

  推导了平面应力条件下单边圆形底部深缺口板条受纯弯曲和拉伸载荷作用的极限载荷公式。

• As an instance, it was used to analysis a structure of plane stress problem. The detail computing steps and results were presented.

  以平面应力问题分析为例，进行了数值试验，给出了详细的计算步骤和结果。

• Based on the analytical formula of the plane stress state, a simple and direct distinguishing method is derived with regard to the direction in which the maximal extremes lie.

  本文根据平面应力状态的解析式，推导出了一种判别最大应力极值所在方向的简捷方法。

• This method has been used in computers for limit analysis of plane stress problems.

  这种方法应用于平面应力问题的极限分析已在计算机上实现。

• The relation of ?to the average value of may be assumed to lie between the aforementioned relations for uniform plane stress and uniform plane strain.

  而和平均值的关系式可以认为处于上述的均匀平面应力和均匀平面应变的两个关系式之间。

• The contact zone width of crane wheel with track is analyzed by plane stress elastic theory.

  采用平面应力弹性理论，对吊车车轮与轨道的接触区尺寸进行理论分析。

• In this paper non-linear analysis with finite element method is used in the study of the plane stress Problems of reinforced concrete members.

  本文对钢筋混凝土构件中的平面应力问题，运用有限单元法进行非线性应力分析。

• The restraint level of plane stress is lesser than that of plane strain at the same mixed condition.

  平面应力条件下裂端的约束水平远低于相应条件下平面应变时裂端的约束水平。

• Based on some model tests made in our strata pressure laboratory in recent years, the need for further developing the plane stress model and the improving method are illustrated in the paper.

  本文以我院矿压实验室近年一些模拟实验为例，论述了进一步发展平面应力模型的必要性和改善它的途径。

• In the article, a simple method is discussed to confirm the principal stress direction un-den the plane stress condition.

  文章给出了一种判断平面应力状态主应力方向的简便方法。