片语

plasma transferred arc surfacing等离子喷焊

plasma electrical arc等离子弧

air plasma-arc空气等离子弧

plasma transferred arc cladding等离子熔覆

Plasma cutting arc characteristics切割弧

plasma transfer arc等离子转移弧

plasma argon arc welding等离子氩弧焊接

light plasma beam arc微束等离子弧

英汉例句

• a non power supply probe was developed to detect the plasma cloud voltage, which consists of plasma arc voltage gradient and plasma sheath voltage.

  文中采用无源探针对由等离子弧梯度电压和等离子鞘层电压构成的等离子反翘（等离子云）电压进行检测。

• by comparing backgouging of plasma arc with carbon arc to the welded joint of 13-5 martensitic stainless steel, the backgouging of plasma arc is proved feasible for the full penetration weld.

  通过对13-5型马氏体不锈钢焊接接头进行等离子弧清根及碳弧气刨清根的比较，证明等离子弧清根对全焊透焊缝实施背面清根是可行的。

• the effects of laser on plasma arc beam, welding depth and width of deposition pool in the hybrid plasma-laser rapid manufacturing is investigated by tests.

  通过试验研究了等离子激光复合快速制造中激光对等离子弧柱形貌、熔积成形时的熔深和熔宽等的影响。

• sometimes nitrogen are being used oxygen plasma arc cutting of arcs gas.

  有时氮气还被用作氧等离子弧切割时的起弧气体。

• according to the different main gas, mainly divides into argon plasma arc cutting division, the oxygen plasma arc cutting and cutting, air plasma arc type.

  根据不同的主要气体，主要分为氩等离子弧切割划分，氧气切割和等离子弧切割，空气等离子弧的类型。

• in variable polarity plasma arc welding of aluminum, the stability and strained condition of variable polarity plasma arc were affected significantly by pilot arc.

  在铝合金变极性穿孔型等离子弧焊接工艺中，维弧电源对变极性电弧的稳定和工件受力状态有显着影响。

• welding equipment includes automatic plasma arc and tig hardfacing machines. only a few typical machines are shown here.

  焊接设备包括自动等离子弧和tig表面硬化机械设备。在此只展示少数典型设备。

• plasma arc thermal spray welding is a kind of surface harden engineering by the way of plasma arc and certain alloy power.

  等离子弧热喷焊技术是一种以等离子弧为热源，以一定成分的合金粉末作为填充金属的表面强化技术。

• plasma spray welding power source, which gives energy to plasma arc welding, involves welding technology, power electricals, control theory, computer science and technology, and so on.

  等离子喷焊电源是为等离子弧提供能量的电源，涉及到焊接工艺学、电力电子学、控制理论和计算机科学与技术等众多领域。

• the plasma cloud charge sensor was applied to detect the status of keyhole molten pool during pulsed plasma arc welding, furthermore, the detected signals were studied.

  将等离子云传感器应用于脉沖等离子弧焊穿孔熔池小孔状态检测，并对检测信号的波形特征做了深入研究。

• in order to reduce the kerf width and improve the kerf quality, the hydromagnetically confined plasma arc was used to cut engineering ceramic plates.

  为减小陶瓷板件切口宽度，提高切口质量，采用水箍和磁场对附加阳极等离子弧进行综合二次约束。

• keyhole plasma arc welding (paw) is a high-energy and high-efficiency technology, it has a wide application area.

  小孔等离子弧焊接是一种高能高效焊接方法，具有十分广阔的应用前景。

• for duplex stainless steel thermal cutting shall be limited to the plasma arc method.

  对双相不锈钢进行热切割应该仅限于等离子弧切割方法。

• this paper analyzes the basic structure, work principle, usages and notice items of pc-60 air plasma arc cutting machine, and lists the common trouble phenomena, causes and solutions.

  分析了pc-60型空气等离子弧切割机的基本结构、工作原因、使用方法和注意事项；例举了其常见故障现象、产生原因和排除方法。

• now the plasma arc cutting machine part on gas pressure to control the flow, because when gun aperture, the gas control certain pressure and you control the flow.

  现在的等离子弧切割机大多靠气体压力来控制流量，因为当枪体孔径一定时，控制了气体压力也就控制了流量。

• this energy release imbalance, closely related with many process parameters, such as plasma arc compression degree, cutting speed and nozzle to the distance, etc.

  这个能量释放的不平衡，与很多工艺参数密切相关，如等离子弧压缩程度、切割速度及喷嘴到工件的距离等。

• at present, the machining method of advanced ceramics have diamond grinding, ultra hard cutters such as pcd, ultrasonic cutting , laser cutting , plasma arc cutting and water-jet cutting.

  目前，常见的工程陶瓷加工方法有金刚石砂轮磨削、pcd等超硬刀具切削、超声波加工、激光加工、等离子弧切割及高压水射流切割。

• the erection of experimental models investigated in this experiment established the principle and experimental foundations for the application of water jet plasma arc thrust in water.

  该项研究实验模型的建立为水射流等离子弧推进的应用奠定了理论和实验基础。

• high-speed plasma arc cutting technology plasma engineering hot metal cutting, and partial melting with high flow will also be the molten metal blow, form a narrow incision.

  血浆高速等离子弧切割技术工程热金属削减部分熔融，并与高流量同样会被熔化的金属吹走，形成一个狭窄的切口。

• re melt deposit welding process is proposed in this paper. to realize the technology, plasma arc , tig arc , high frequency induction, gas shield continuous stove and msw are adopted.

  提出熔敷焊接工艺方法，采用等离子弧、tig电弧、高频感应、气保护连续炉、真空炉和模中熔铸工艺实现了熔敷焊接工艺方法。

• the working principle, structure and parameters design of plasma arc generator for heat treatment are described. experiment has shown that it has good effect on partial surface hardening.

  论述了用于金属材料表面热处理的等离子弧发生器的工作原理、结构特点和参数设计。试验证明这种发生器对材料的表面局部硬化非常有效。

• but the argon plasma arc voltage, low enthalpy is not high, cutting ability is limited, and cut the air than the thickness of the cut about 25% lower.

  但氩气等离子弧的电压较低，焓值不高，切割能力有限，与空气切割相比其切割的厚度大约会降低25%。

• in recent years, plasma arc welding has made a great progress in the aspects of equipment, control and materials.

  近年来，等离子弧热喷焊技术研究在设备、控制和应用材料几方面都取得了长足的进展。