片语

plasma arc spraying welding等离子弧喷焊

plasma melt spraying等离子熔喷

Plasma-spraying technique等离子喷涂技术

dc-plasma-spraying surface metallurgy等离子束表面冶金

plasma hot spraying等离子热喷涂

plasma flame spraying等离子喷镀

plasma arc spraying等离子弧喷涂

deposited by plasma spraying等离子喷涂

英汉例句

• a metal ceramics coat shall be lined on the inner cavity of valve by adopting plasma spraying technique. valve is made to extend service time.

  采用等离子弧喷涂工艺，在阀门内腔衬一层金属陶瓷涂层，可延长阀门的使用时间。

• the properties of the composite powders obtained were determined and the plasma spraying experiments were carried out to examine the properties of coating layers.

  测定了所获得复合粉末的性能，进行了等离子喷涂试验，检查了涂层的性能。

• optimum selection of the technological parameters of plasma spraying and field tests show that spraying cowc35 wear-resistant coating on the surface ofdrawworks brake drum is preferable.

  等离子喷涂工艺参数的优选和试验研究的初步结果表明，在绞车剎车鼓表面喷涂cowc35耐磨硬质合金涂层的工艺是可行的。

• methods: the antibacterial hydroxyapatite coating material which contained silver-zirconium phosphate antimicrobial was prepared on the ti implant by using vacuum plasma spraying technology.

  方法：采用真空等离子喷涂技术，在钛基材表面制备含磷酸锆载银抗菌剂的抗菌羟基磷灰石涂层材料。

• the basic experimental researches on rapid manufacturing moulds by plasma spraying have been carried out.

  对等离子弧喷涂法快速制模技术进行了基础实验研究。

• the influence of added charcoal pore-forming agent and improved plasma spraying parameters on porosity of the anode layer were investigated experimentally.

  实验研究分析了添加炭粉造孔剂和改进喷涂工艺参数对阳极层孔隙率的影响。

• thermal plasma spraying is one of the important technologies in modern surface engineering.

  热等离子体喷涂技术是现代表面工程的重要手段之一。

• oxidation resistance coatings prepared by plasma spraying process on the surface of workpiece can improve oxidation resistance.

  利用等离子喷涂技术在工件表面制备抗高温氧化涂层，能显着提高工件的抗氧化性能。

• in gas turbines, thermal barrier coatings (tbcs) applied by air plasma spraying are widely used to lower the temperature of hot components.

  为了降低航空发动机热端部件的温度，空气等离子喷涂已被广泛地应用。

• self-lubricating wear resistant coating is prepared by plasma spraying using chromium carbide, nickel chrome, fluoride-metal, and silver composite materials.

  采用碳化铬、镍铬合金、氟化物共晶体和银的复合粉末为原料，通过等离子体喷涂方法制备高温耐磨自润滑涂层。

• results showed that ta coating with dense structure and uniform thickness could obtain by the optimized plasma spraying process.

  结果表明，采用优化的等离子喷涂工艺参数，可以制取组织致密、厚度均匀的钽涂层；

• plasma spraying technology is widely used to modify the surface of biomedical materials, such as titanium and its alloys.

  等离子喷涂是一种常用的生物医用材料表面改性技术，被广泛应用于钛等金属人工骨的表面改性。

• in this paper, the constitution and technical requirement of plasma spraying device are introduced, and the circuit and the operating procedure designed are analyzed.

  介绍了等离子喷涂设备的组成及技术要求，分析并设计了等离子喷涂的电路图及工作程序流程图。

• the paper also briefs the nozzle or moving blade surface hardening treatment technology, including plasma spraying and diffusion layer for preventing the nozzle and moving blade from spe.

  文章还介绍了为预防汽轮机喷嘴和动叶片免受固体颗粒侵蚀所采用的表面硬化处理技术，包括等离子喷涂层和扩散渗层在内；

• a review is given on the research progress in nanostructured ceramic coatings prepared by plasma spraying at home and abroad.

  等离子喷涂纳米陶瓷涂层是目前纳米涂层领域的研究热点之一。

• nanostructure ypsz coating was fabricated by plasma spraying technology.

  研究采用等离子体喷涂制备纳米结构ypsz涂层。

• results obtained show that vacuum plasma spraying is a suitable method to deposit boron carbide coating.

  结果表明，真空等离子喷涂是制备碳化硼涂层较为合宜的方法。

• a plasma spraying welding robotic system using for repairing easily worn off parts assembled in dredge equipment on ship is developed to make the operation automated.

  本系统应用等离子喷焊工艺对工程船舶设备中的易损零件进行修复。

• the ha gradient coating on ti alloy substrate was developed using pvd and plasma spraying techniques.

  采用先进的表面技术复合制备生物活性梯度涂层材料。

• in this paper, a control system for robot plasma spraying based on configuring software was developed by analyzing the processes characteristics of robot plasma spraying.

  分析了机器人等离子喷涂工艺特点，开发了一种基于工控组态软件的机器人等离子喷涂控制系统。

• the plasma spraying technique was used to prepare a set of thermal barrier coating specimens, and water-cooling method was used in thermal shock experiments.

  用等离子喷涂方法在合金圆柱体上制备了热障涂层，并用水冷的方法进行了热沖击实验，试样的失效现象为轴向的开裂和剥落。

• the coating is a weak part in implant system. the main purpose of research on plasma spraying technology and component designing is to improve coating integrality and coating matrix adhesion strength.

  涂层部位仍是种植体系统中的薄弱环节，等离子喷涂工艺和组分设计研究的主要目的是提高涂层自身的完整性以及涂层与基体间的结合强度。