英汉例句

• The results indicate that it is possible to control the behaviors of reinforced particles in the metal matrix by using intense magnetic fields in the solidification process of metal matrix composites.

  强磁场的磁化力和洛伦兹力通过控制初晶硅颗粒迁移行为来改变其在合金基体中的分布状态，通过影响凝固过程中的对流现象改变合金的凝固组织。

• A two-dimensional unsteady temperature field calculation mathematical model has been set up by analyzing ingot solidification process and the program has been developed.

  在分析锻造用钢锭凝固过程特点的基础上，建立起钢锭铸造凝固的二维非稳态温度场计算数学模型，并编制程序。

• The numerical simulation of casting solidification process is one of important methods and ways by which the casting quality and the economic benefits of foundry production can be raised.

  铸件凝固过程数值模拟是提高铸件质量和铸造生产经济效益的重要方法和途径之一。

• The solidification process of complex - shape casting is too complex to analyse with experiment or experienced method. This causes it very difficult to design the casting process correctly.

  形状复杂的铸件热节多，相互之间又有较大的影响，其凝固过程不易準确掌握，这就为铸造工艺设计带来困难。

• Abstract: In this paper, solidification process of laser pool for compositecoating system is studied, using numerical technology.

  文摘：采用数值模拟技术研究了复合涂层激光熔池凝固过程。

• The effects of casting process parameters on transformational behavior of primary nondendrite phase and solidification process of ZA27 alloy in stirring are investigated under transient condition.

  研究了在非稳态条件下，搅拌铸造工艺参数对ZA27合金的凝固过程及初生相组织形貌转变的影响。

• The mathematical model of numeric simulation of casting filling and solidification process were studied.

  对铸造充型及凝固过程数值模拟的数学模型进行了研究。

• The study was carried out to investigate the effect of compound field which is a combination of electromagnetic field and power ultrasonic field on solidification process of A356 alloy.

  研究了复合场(功率超声场和旋转电磁场复合)对A356合金凝固行为的影响。

• The solidification process and Characteristic in horizontal Continuous Casting of aluminium alloy is simply and theoretically analyzed in this paper.

  本文对铝合金水平式连铸机的凝固过程及特点作了简要的理论分析。

• The results demonstrate that solidification process may be divided into two stages: quasi-state stage and accelerating stage.

  结果表明其凝固过程分为凝固準稳态阶段和凝固加速阶段两个阶段。

• Using the developed numerical simulation software of temperature field, the solidification process of wear resisting cast ball in metal mold was numerically simulated.

  利用温度场数值模拟软件对金属型耐磨铸球的凝固过程进行了数值计算。

• Under vigorous convection caused by intense electromagnetic stirring, the dynamic solidification process of melt is quite different from that of conventional casting which is relatively static.

  在电磁搅拌引起的强烈混和对流作用下，熔体的动态凝固过程不同于常规铸造时的静态凝固过程。

• The different parameters symbolizing solidification quality and effect of solidification process parameters on solidification quality are analyzed.

  分析了表征凝固质量的各种参数及凝固过程参数对凝固质量的影响。

• The solidification model of twin-roller strip casting is established. The solidification process of strip casting is mathematically simulated by using the finite element software.

  建立双辊薄带连铸凝固数学模型，并利用有限元软件对薄带连铸凝固过程进行数值模拟。

• The solidification process of liquid metal in the CASTEX technique was studied by FEM (finite element method).

  利用有限元法研究了连续铸挤工艺中液态金属的动态凝固过程。

• The effect of power ultrasonic on the solidification process of Babbit was investigated.

  研究了功率超声对巴氏合金凝固过程的影响。

• The rate of solidification process increases with the concentration of the monomer solution, gelation temperature and the amount of the initiator and catalyst.

  随着单体溶液浓度、固化反应温度、引发剂和催化剂加入量的提高，凝胶固化反应速率快速增长。

• The solidification process of the surface composite layer was also analysed in this paper.

  本文分析了表面复合材料层的凝固过程。

• The solidification process of a driving wheel hub cast with former foundry method was simulated to find out the reason causing shrinkage defects.

  对驱动轮轮毂原铸造工艺进行凝固模拟，找出缺陷的成因，并对原工艺进行了改进，采用顶置随形压边浇冒口。

• Directional solidification process is an important part that of the physical metallurgy of solar energy polysilicon.

  定向凝固工艺是物理冶金法制备太阳能级多晶硅的一个重要环节。

• The application of high magnetic field in metal solidification process was attracted more and more attention.

  强磁场在金属凝固过程中的应用已受到越来越广泛的关注。

• The optimization on the filling and solidification process of CY-61100 lathe tailstock casting was conducted by numerical simulation.

  对CY- 61100车床尾座铸件充型及凝固过程进行了数值模拟及优化研究。