英汉例句

• the machining precision and surface quality are introduced in electrical discharge machining and their causes as well as improved measures are put forward.

  介绍了电火花加工中常见的加工精度和表面质量问题以及产生的原因及相应的改善措施。

• the machining precision can be improved and the dimension scope of machining the polygon prism is enlarged by using the proposed compensation method.

  采用这种误差补偿方法可以大大地提高车削多面体的精度，扩大车削多面体的尺寸范围。

• this article gives new definitions to various errors which impair the machining precision in technological system.

  本文对加工工艺系统中影响加工精度的各项误差作了新的定义。

• it is the machining precision that limits the commercialization and industrialization of the parallel machine tools (pmts) greatly.

  并联机床的加工精度问题是目前限制并联机床商业化、产业化主要瓶颈。

• adopting the computerized numerical control technique to machine the breakage groove of torshear type bolts can improve the machining precision of groove, guarantee the assembled quality.

  扭剪型螺栓破断沟槽的加工采用数控技术、提高沟槽加工精度，确保配套质量；

• the machining precision of the machining center looks forward to being reflected by inspecting the geometric precision and the orientation precision of the machining center.

  加工中心可达的加工精度期望通过检定加工中心的几何精度和定位精度能够反映出来。

• the utility model has the advantages that the verticality of the axial lead of the electric drill and a basal plane is good, and the machining precision of drilling holes is high.

  该磁座鉆的电鉆轴心线与基面垂直度好，鉆孔加工精度高，有很好的推广应用前景。

• the experimental results of machining actual workpiece prove that nc machining principles are correct, technology is simple, and the machining precision is high.

  斜航式法向圆弧锥齿轮数控加工实验表明，该锥齿轮数控加工原理正确，工艺简单，且加工精度较高。

• it can enhance the machining precision by the way of calling the value of cutter offset to compensate automatically.

  从而保证零件加工时，通过调用刀具补偿值自动进行补偿，提高工件的加工精度。

• edge effect of small tool manufacturing restricts the machining precision and efficiency of ccos technology.

  小磨头抛光的边缘效应严重制约ccos技术的加工精度和加工效率。

• the error analysis indicates that the machining precision could be guaranteed just only selecting the reasonable parameter.

  误差分析表明，只要合理选择参数增量，能保证所要求的加工精度的要求。

• measures to promote the machining precision of numerically controlled lathe with open or half-open loop system;

  随着科学技术的不断发展，社会对产品的加工精度要求也越来越高。

• the difficult problem is satisfactorily solved. the machining precision and the surface quality reach the design requirements.

  初步解决了该加工难题，加工精度、表面质量均符合设计要求。

• gear machining experiment results show that the new type of interpolation is correct, practicable, and the machining precision can reach to 6~5 grade (gb1009588).

  实际齿轮加工试验表明：提出的新型双闭环零误差硬件插补同步运动控制原理是正确可行的，齿轮加工精度可稳定在6～5级（gb10095-88）。

• hob is a efficient tool for machining gear which directly determines the machining precision of gear.

  滚刀是一种高效齿轮加工刀具，它直接决定着齿轮的加工精度。

• piston is the key component of combustion engine, the machining precision and the quality of piston has direct influence on the performance of the combustion engine.

  活塞是内燃机的关键部件，活塞的精度和质量直接影响到内燃机的性能。

• this research will have great effect on promotion the machining precision of the roller's complex curved surface and the forming precision of the workpiece in skew rollin…

  对提高斜轧辊型面加工精度及斜轧件精度有较明显的意义。

• the main factors that affect the machining precision and surface quality in high-speed wire cutting are analyzed. and the corresponding effective precautionary measures and handling methods are given.

  分析了高速走丝线切割加工中影响加工精度与表面质量的主要因素，并针对这些原因分别给出各自有效的预防及处理方法。

• the research shows that this method can significantly improve the machining precision and the surface quality. the reaming regulations are summarized. the test results are discussed in this paper.

  试验结果表明，超声振动干式扩孔与超声振动湿式扩孔有相近的规律，加工精度和表面质量可达到或超过磨削工艺。

• at last large experimental data was given out to verify the effect of ultrasonic vibration cutting on the machining precision of thin -wall pieces.

  证明超声切削确实能有效提高薄壁零件的加工质量。

• the calculative precision of the cutting breadth has a significant effect on the machining precision and the machining efficiency for free-form surface machining.

  在自由曲面加工中，行距的计算精度直接影响着曲面的加工精度和加工效率。

• the mathematical relationships have also been set up between the machining precision and the rotating precision of the spindle.

  建立了加工精度与主轴回转运动精度之间的数学关系。