片语

temperature distortion感温变形，热变形

thermal bending deformation热弯曲变形

thermal distortion热变形；热变化；热成畸变

thermal residual deformation热残余应变

thermal shrinkage deformation温度收缩变形

thermal elastoplastic deformation热弹塑性变形

thermal compressive deformation热压缩变形

thermal curling deformation温度翘曲

thermal elastic deformation热弹性变形

thermal-deformation compensation热变形补偿

英汉例句

• in this paper, the thermal error calibration principle of precision machines is presented, and the accuracy index of active calibration thermal deformation is proposed.

  研究精密机械热误差校正的机理，提出主动热校正控制变形误差的精度指标。

• due to the atmosphere temperature change, the bridge superstructures' thermal deformation exist impersonality which is a fact.

  由于周围大气温度的变化，桥梁上部结构产生的温度变形是一个客观存在的事实。

• based on the temperature distribution, thermal stress and thermal deformation were analyzed. (3) coupled analysis of thermal and mechanical loads.

  以温度场分布作为载荷条件分析活塞在热负荷作用下的热应力和应变分布情况。

• moreover, the thermal behavior of work roller of high stiff wide plate mill was analyzed, the study provide the foundation for researching the thermal deformation of the work roller.

  在此基础上对高刚度宽板轧机工作辊的热行为进行了分析，为研究工作辊的热变形提供了依据。

• the results show that thermal compensation in non-irradiant areas could reduce the temperature gradient of mirror for high-power laser, and then could decrease the thermal deformation significantly.

  结果表明有效的热补偿对镜面变形峰谷值有很大的影响，在非光照区进行热补偿可以大大降低镜体的温度梯度，从而明显减小镜面变形的峰谷值。

• the factors, such as thermal deformation and mechanical vibrating of the cavity, will result in cavity detuning which led to the decline in cavity voltage, and phase drift.

  高频腔体热变形，腔体的机械震动等都会造成腔体失谐从而引起腔体电压的下降以及高频电压的相位漂移。

• the advantages of the process are processing error and thermal deformation is small, standard capability is strong and the repaired nozzle performance is clearly superior.

  该工艺的优点是加工误差小、热变形小、规范性强、修复后的喷嘴性能明显优越。

• the degree of thermal deformation is related to the machining way, the shape, material and stress of the workpiece.

  热变形的大小与加工方式、零件形状、材料以及应力等多种因素有关。

• on this basis, to reduce the thermal deformation of the few measures to ensure that the inflatable antennas and other sophisticated space structure to work properly.

  在此基础上，提出了减小热变形的几点措施，以保证充气天线等精密空间结构能够正常工作。

• the measures to reduce the heat and thermal deformation of the motorized spindle are brought forward.

  最后提出了有效降低电主轴温升减少主轴热变形的方法。

• simulation of thermal deformation is significant to enhance thermal reliability of electronic devices.

  电子器件热变形的模拟对于提高器件的热可靠性有着重要意义。

• the composite has fast crystallization rate, good barrier property to liquid and gas. the intensity, modulus and thermal deformation temperature of the composite are high. the co…

  该复合材料的结晶速率快，对气体、液体的阻隔性好，强度、模量、热变形温度高，且透明、无毒、无味，不易破碎，完全可应用于茶饮料、油品及碳酸类饮料等液体的包装。

• this article is just for the demand and discusses a method using shape memory alloy to control the thermal deformation of antenna at orbit.

  本文就是适应这种要求而探讨了一种利用形状记忆合金控制在轨天线热变形的论文。

• in this paper, the thermal deformation of a plate is measured by phase shifting laser holography interference.

  本文应用相位移激光全息干涉法研究板状结构的热应变。

• the effects of the number, length and width of the slots on the thermal deformation of a circular sawblade were investigated in this paper.

  本文研究了圆锯片径向槽的数量、长度、宽度对圆锯片热变形的影响。

• the temperature and thermal deformation distributions of the thermal compensation mirror were simulated using ansys finite element analysis in this paper.

  采用ansys有限元软件，系统模拟了强激光作用下的热补偿全反射硅镜的温度场分布和热变形。

• the thermal deformation theory has world-wide been researched massively, but the study on thermal deformation about casting-roll is little.

  对于轧辊热变形理论，国内外都进行了大量的研究。

• constructing mathematical models of thermo-deformed machine tool parts will benefit the analysis and elimination of the effect of thermal deformation on processed parts.

  建立机床构件热变形后的数学模型能够给分析与消除热变形对工件加工的影响提供一定的方便。

• the influence of thermal deformation on measuring error is considered.

  对测量装置结构进行优化设计，减小热形变的影响；

• temperature field of cast roll and its thermal deformation were studied during strip casting with elastoplastic and thermal stress coupled fem.

  建立了双辊式薄带钢铸轧过程的三维流场与温度场耦合数学模型 ，研究了工艺参数对铸轧过程的影响。

• it is also equipped with constant-temperature cooling system of spindle, to prevent thermal deformation and meet the high-precision machining demand of the parts.

  并配置主轴恒温冷却系统，防止热变形，以满足零件的高精度加工需求。

• experimental results show that the method of global temperature control of gma presented can reduce thermal deformation of gma greatly, especially, in the situation of large current and high accuracy.

  进行了多组热变形对比实验，结果表明，致动器的整体温控装置有效地抑制了致动器的热变形影响，适合于大电流、高精度场合。

• linac causes non-uniform thermal deformation and frequency shift of the cavities.

  铜损会产生不均匀的热变形和腔频率偏移。

• the equations of thermal deformation of hollow piece under stress in uneven steady-state and even steady-state temperature field have been obtained.

  采用热力学方法推导出稳态非均匀温度场中孔型零件在受力情况下的热变形公式。

• the resin toughness, the casing of the thermal deformation temperature, corrosion-resistant chemical merit, is a complex entanglement with a good performance resin.

  该树脂韧性好，其浇铸体的热形温度高，耐化学腐蚀性能优异，是一种综合性能良好的缠绕用树脂。

• also, dsc is employed to obtain the thermal deformation field of the assembly structures of flip chip on ceramic substrate, especially for the strain concentrating area around the solder joints.

  在电子封装结构的热变形分析中也引入了数字散斑相关技术，测量了封装结构中焊点附近区域的变形分布，显示出在焊点位置产生了由热变形不协调引起的变形梯度的高度集中。