英语释义

1. designed for or relating to the transformation of heat energy into mechanical work

片语

thermomechanical method热机械方法

thermomechanical processing热机械处理

thermomechanical effect热力学效应

thermomechanical treatment形变热处理

thermomechanical postulate热力学公设

thermomechanical instability热机失稳

thermomechanical treating形变热处理

thermomechanical curves热机械曲线

thermomechanical simulator热模拟实验机

英汉例句

• Advanced tests like corrosion resistance to molten aluminium, thermomechanical properties, thermal conductivity and microporosity are discussed in respect of application areas for Bonite.

  并结合博耐特的相关应用领域进行了博耐特耐火材料抗铝液侵蚀、热机械性能、热导率和微气孔等较为前瞻性的试验和探索。

• The thermomechanical processing and superplastic deformation behavior of 01420 alloy have been investigated.

  对01420合金的形变热处理工艺和超塑性进行了研究。

• Influence of trace elements and thermomechanical treatment on fatigue performance of Cu based elastic alloy has been investigated.

  结果表明：铜基弹性合金通过多元少量微合金化与形变热处理工艺相配合，能显着提高材料的疲劳性能。

• The optimum fiber proportion of Masson「 s pine thermomechanical pulp reinforced polypropylene composite could be determined accurately by optimum design method of main composition analysis.

  用多元统计分析中的主要成分分析法优化设计马尾松热磨机械浆增加聚丙烯复合材料，合理地确定多项性能兼优的最佳纤维含量。

• In this paper, deinked pulp (DIP) and bleached chemi thermomechanical pulp (BCTMP) with kraft pulp (KP) used to make newsprint at different beating degrees are researched.

  本文研究了脱墨浆(DIP)、漂白化学预热机械浆(BCTMP)与硫酸盐浆(KP)在不同打浆度下配抄新闻纸的状况。

• Although the loading limits of the composite was determined by the residual glassy phase, the incorporation of the fiber leaded to a significant increase in the thermomechanical Properties.

  虽然复合材料的受力极限取决于残余玻璃相，但纤维的引入使得材料的热机械性能得以大幅度地提高。

• Metal cutting generally involves a large amount of plastic deformation and is coupled thermomechanical process. It always comes with several hundred MPa of residual stresses on the machined surface.

  金属切削是一个伴随着高温的塑性大变形过程，在加工表面往往产生高达几百兆帕的残余应力。

• The best fiber capacity of wood thermomechanical pulp reinforced nylon composite could be determined accurately by optimum design method of main composition analysis.

  用多元统计分析中的主成分分析法优化设计木片热磨机械浆增强尼龙复合材料，合理地确定多项性能兼优的最佳纤维含量。

• The present paper is devoted to the development and establishment of corresponding thermochemical and thermomechanical ablative models by analyzing flow and C/C composite materials ablative mechanism.

  通过对碳基复合材料热化学烧蚀机理分析，由质量守恒、能量守恒及系统化学反应的热化学平衡原理，建立相应的热化学和热力学烧蚀模型。

• High temperature isothermal mechanical fatigue and in phase thermomechanical fatigue (TMF) tests in stress control were carried out on a molybdenum alloy.

  对钼合金进行了应力控制高温低周等温疲劳和同相位热机械疲劳试验。

• In identifying parameters of the models, isothermal fatigue test results were applied A method using isothermal cycle data for predcting thermomechanical fatigue life bine was developed.

  在确定模型的一些参数时，采用等温力学试验和疲劳试验的数据，把等温疲劳研究成果推广到变温疲劳分析领域。

• Direct quenching, n-in thermomechanical processing, quenching immediately following the final hot deformation.

  直接淬火，名词，在形变热处理过程中，最终热变形之后立即进行淬火。

• The thermomechanical control processing is a latest metallurgical technology which has been successfully applied to produce medium and heavy guage plates and sheets with high quality.

  热机械过程控制是一项新的合金技术，它成功地用于生产高质量的中厚铜板和薄板；

• The models for crystallographic elastoplastic behavior, creep, fatigue and thermomechanical fatigue and life predictive models have been presented and validated.

  这些工作包括：建立并验证了弹塑性、蠕变滑移本构模型及蠕变持久寿命预测方法；

• A new approach to determining the thermomechanical parameters of forging processes is proposed based on the dissipative structure theory and the dynamic material model (DMM).

  在耗散结构理论和DMM方法的基础上，提出一种确定锻造热力参数范围的方法，以获得组织和性能稳定一致的锻件。

• A three dimensional elastoplastic finite element model is presented for thermomechanical coupled finite deformation problems, and using the model, a slab hot rolling is computer simulated.

  建立了三维热力耦合问题弹塑性有限变形有限元方法，并对板材热轧过程进行了计算机模拟。

• After thermomechanical treatment, the natural quenched alloy has coarser precipitates and its distribution is inhomogeneous.

  热轧后经自然冷却的合金经热机械处理后，析出相粒子较大，分布也不均匀；

• Through non-linear finite analysis , the dependence of fatigue life of solder joint on thermomechanical properties of underfill was calculated.

  通过非线性有限元分析，计算出焊点疲劳寿命对下部填充料基本热力学性质的依赖关系。

• The stress in the coating is obtained as well as it」s influence on the thermomechanical behavior of the material.

  计算得到了材料的涂层处的应力状态以及它对复合材料整体热机械加载性能的影响。

• The wood can also be crushed with refiners, which use high pressure steam and temperatures to created what is called thermomechanical pulp.

  木材也可以粉碎炼油厂，使用高压蒸汽和度，以建立所谓的热浆。

• The critical reduction for closing the pores in the center of cylinder forgings undergoing hot upsetting are numerically simulated by using thermomechanical coupled finite element method.

  采用大变形热力耦合有限元法模拟了圆柱体锻件心部空洞的热锻闭合压下率。

• The effects of thermomechanical treatment on the structures and properties of 7a04 aluminum alloy were studied by mechanical tensile test, metallographic and TEM analysis.

  采用力学性能测试、金相显微分析和TEM等方法。研究了形变热处理工艺对7a04铝合金的组织和性能的影响。

• The effect of thermomechanical treatment on the microstructure and properties of the automobile steering knuckle was researched in this paper.

  研究了汽车转向节锻后余热淬火工艺对钢的组织和性能的影响。

• By integrating the thermomechanical coupled FEM with mathematical model of microstructure evolution, the paper proposes a numerical prediction method for microstructure during hot deformation.

  将热力耦合有限元方法与金属微观组织演变数学模型相结合，提出了热变形过程微观组织的数值预报方法。

• The results show that the thermomechanical treatment can improve the quality of the automobile steering knuckle.

  结果表明，锻造余热淬火工艺对汽车转向节质量有明显改善。

• Objective to test the hypothesis that collagen is a significant determinant of skin viscoelasticity, with particular attention paid to the thermomechanical properties of skin under dynamic loading.

  目的检验关于胶原蛋白是皮肤黏弹性主要决定因素的假设，重点考察皮肤组织在动态载荷下的热力学性能。

• The generation of frictional heating and the transient distributing of temperature of the brake were analyzed by the direct thermomechanical coupling field finite element method.

  采用直接热力耦合有限元方法来分析制动器摩擦热的产生及其温度的瞬态分布。

• This paper presents the metallurgical principle of thermomechanical process control, basic physical elements and process parameters.

  本文介绍了热机械过程控制的冶金原理，基本物理要素和过程参数。