英语释义

• having the property of softening or fusing when heated and of hardening and becoming rigid again when cooled;

  "thermoplastic materials can be remelted and cooled time after time without undergoing any appreciable chemical change"

• a material that softens when heated and hardens again when cooled

片语

thermoplastic coating热塑涂敷

thermoplastic foams热塑泡沫

Thermoplastic accessories热塑性塑料配件

thermoplastic material[材] 热塑材料

thermoplastic composites热塑性复合材料

thermoplastic polymer热塑性高分子

thermoplastic starch热塑性淀粉

Thermoplastic Polyurethane热塑性聚氨酯

thermoplastic plastics[塑料] 热塑性塑料

thermoplastic PU热塑性聚氨酯

thermoplastic shells热塑壳

thermoplastic resin[树脂] 热塑性树脂

英汉例句

• the property, characteristic and application of pps as both a special engineering plastic with excellent properties and a crystalline thermoplastic are introduced.

  叙述聚苯硫醚（pps）作为一种性能优异的特种工程塑料，同时又是一种结晶性热塑性树脂的性能特点及应用；

• packaging of winding wires . part 3 : taper barrelled delivery spools . section 3 : specification for non - returnable spools made from thermoplastic material.

  绕组线的封装。第3部分：锥形筒式输出线轴。第3节：由热塑性材料制成的不能回收使用的绕线轴规范。

• resin with the formulation ch2ch2 used in thick film thermoplastic powder coatings.

  树脂由ch2ch2组成，该树脂可生产厚涂的热塑性粉末涂料。

• doors open with high impact thermoplastic handles.

  门开高影响热塑性处理。

• a type of thermoplastic synthetic copolymer composed of various proportions of styrene, acrylonitrile and butadiene.

  由各种比例苯乙烯、丙烯腈和丁二烯组成的一类热塑性合成共聚物。

• of this quantity 15% was added to thermoset ant 85% to thermoplastic polymers.

  其中15％加于热固性聚合物，85％加于热塑性聚合物。

• sometimes one fabric is backed with another by bonding, either with adhesive, or with thermoplastic fibers which, when heated, fuse the two fabrics together.

  有时一种织物，反面用另一种织物粘合在一起，或者用粘性的纤维，或者用热塑性纤维，把两种织物加热粘合在一起。

• the crushing machine is tested on some thermoplastic materials, such as ldpe, hdpe, pvc and eva, and the experiment results are given .

  列举了用该粉碎机粉碎低密度聚乙烯、高密度聚乙烯、聚氯乙烯、乙烯-醋酸乙烯等热塑性材料的试验结果；

• in contrast with metal and thermoplastic material, which has a higher coefficient of thermal expansion(cte).

  相较于金属和热塑材料，什么材料具有更高的热膨胀系数（cte）？

• service temperature should be considered in selection of the proper thermoplastic valve material for the application.

  在实际应用中选择适当的热塑性塑料阀门材质时应该考虑工作温度。

• carbon black was blended into thermoplastic polyurethane, the electrical conductive fiber was obtained by melting spinning.

  将导电炭黑混入到热塑性聚氨酯中，经熔融纺丝制得导电纤维。

• thermoplastic components can only rarely be operated continuously above 250℃, with an absolute upper service temperature of about 400℃.

  热塑性塑料零件只有很少能连续运行在250℃以上，其绝对最高工作温度约为400℃。

• they probably don't pause to consider that nylon represents a petroleum-derived thermoplastic invented in 1935 by wallace carothers, a chemist working at the dupont company.

  但她们大概不会想到尼龙产品是1935年由化学家wallacecarothers发现的石油产品热塑性塑料的代表。

• medical thermoplastic polyether urethanes(tpu) based on mdi/ptmg/bdo system were prepared by one -shot, prepolymer and semi-prepolymer processes with equivalent stoichiometries respectively.

  在系统中，以一步法和预聚法为对照，研究了半预聚法对医用热塑性聚氨酯（tpu）结构和性能影响。

• this method is used to form hollow objects out of thermoplastic materials.

  使用这种方法，形成中空物体的热塑性材料。

• through analysis of various of match materials, hot-solidified epoxy colophony and thermoplastic and machinable wax are chosen as part material and support material.

  通过对多种材料匹配的分析，分别选择热固性的环氧树脂和热塑性可机加工蜡作为工件材料和支撑材料。

• the vast majority of injection molding is applied to thermoplastic polymers.

  注塑成型的绝大多数都用于热塑性聚合物。

• thermoplastic materials can be remelted and cooled time after time without undergoing any appreciable chemical change.

  热塑性的材料能够不断的再熔化和再冷却而不需要经历任何可感知的化学变化。

• the article introduces the knit-lines formation, mechanical behavior and influencing factors for the thermoplastic injection molded parts.

  介绍了热塑性塑料注射塑料件的熔合缝的形成及其力学特性和影响因素。

• another kind is thermoplastic polystyrene foamed plastic thermosetting and rigid polyurethane foams primarily organic heat preservation material, usually identified as combustible materials.

  另一类是以热塑性聚苯乙烯泡沫塑料和热固性聚氨酯硬泡为主的有机保温材料，通常认定为可燃性材料。

• fox, like most inventors, was already on the next project, becoming champion for a new thermoplastic called ppo (polyphenylene oxide).

  福克斯，就像大多数的发明者一样，已经开始了下一个新项目的—新耐热塑料ppo（聚亚苯基氧化物）的研发。

• what is the purpose of adding glass fiber to thermoplastic material?

  向热塑材料中添加玻璃纤维的目的是什么？

• in general, most of the thermoplastic materials offer high impact strength, corrosion resistance, and easy processing with good flow characteristics for molding complex designs.

  一般而言，大多数热塑性材料具有较高的抗沖击强度、耐腐蚀性以及良好流动性使其容易加工而适于复杂成型设计。

• packaging of winding wires . part 2 : cylindrical barreled delivery spools . section 2 : specification for returnable spools made from thermoplastic material.

  绕组线的封装。第2部分：圆桶形输出线轴。第2节：由热塑性材料制成的可回收使用的绕线轴规范。

• carbon molecular sieve (cms) membranes were prepared on ceramic supports from thermoplastic phenolic resin and their gas separation properties were investigated.

  以无机陶瓷管为支撑体、热塑性酚醛树脂为原料，经高温炭化制备了炭分子筛膜。