tribological
adj. 摩擦学的
2025-06-05 22:43 浏览次数 4
adj. 摩擦学的
1. a study that deals with the design, friction, wear, and lubrication of interacting surfaces in relative motion (as in bearings or gears)
2. a branch of mechanical engineering that deals with the design, friction, wear, and lubrication of interacting surfaces (as bodily joints) in relative motion
tribological coating涂层
tribological characteristics摩擦学特性
tribological designn摩擦学设计
tribological chemistry摩擦化学
tribological materials摩擦学材料
tribological oxide摩擦氧化
tribological pairs摩擦副
It is important to understand the tribological characteristics of rare earth materials and the role of rare earth element.
了解和掌握含稀土材料的摩擦学特性及稀土元素在其中的作用机制具有重要的意义。
The tribological property of the composite coatings modified with nanometer ceramic particles and self lubrication nano-powders is overviewed.
对纳米陶瓷微粒及自润滑纳米粉改性的非晶纳米复合镀层的摩擦学性能进行了综述。
The structure characteristics and lubricate theory of nanometer graphite fluoride were analyzed, and tribological properties of nanometer graphite fluoride were researched on four-ball machine.
探讨了纳米级氟化石墨的结构特征和润滑原理,使用四球摩擦试验机研究了纳米级氟化石墨的摩擦学性能。
The experimental results showed that this additive can notably improve the lubes「 load capacities and tribological properties, and shows none-corrosiveness to metals.
试验结果表明:加入该添加剂后,润滑油的承载能力和摩擦学性能得到了较大的改善,对金属无腐蚀性。
The collection of information about the tribological behaviour of friction pairs in auto engine lubrication system is the effective method to diagnose faults of engine tribological system.
采集汽车发动机润滑系统中摩擦副经历摩擦学行为的信息是诊断发动机摩擦系统故障的有效手段。
Structural ceramics possess such features as high strength, resistance to high temperature, high erosion-abrasion resistance, so structural ceramics are widely used as tribological parts.
结构陶瓷具有高强度、耐高温和耐磨蚀等优点,作为摩擦学部件已得到广泛的应用。
Knowledge acquisition method of tribological system condition identification using Bayesian network was proposed.
研究了基于贝叶斯网络的摩擦学系统状态辨识知识的获取方法。
Special friction and wear testing machine is the necessary equipment for researching the material」s tribological properties in special working conditions.
特种摩擦磨损试验机是研究材料在特殊工况下摩擦学性能的必备装置。
An overview of the influencing factor to the tribological properties of ultra high molecular weight polyethylene (UHMWPE) and the modification methods is presented.
综述了影响医用超高分子量聚乙烯(UHMWPE)摩擦学性能的因素,以及改进的方法。
The tribological performance of BTLB in rapeseed oil was evaluated by four-ball tester.
利用四球摩擦磨损试验机对添加剂BTLB在菜籽油中的摩擦学性能进行了评价。
In addition, the tribological properties of nanocrystalline Pb powders were tested with a four-ball machine.
另外,在四球试验机上考察了铅纳米晶的摩擦学性能。
Based on the actual working conditions of coal mine, this paper has studied stresses, lubrication, wear mechanism, and failure of oil-distributing pair of axial piston pump with tribological analysis.
本文针对矿井的实际工况,对采煤机轴向柱塞泵的配油副从其受力、润滑、磨损机理以及失效原因等方面进行摩擦学分析。
The coupling problem between the dynamic behaviors and the tribological behaviors of the piston-liner systems in multi-cylinder internal combustion engines was studied.
从理论上对多缸内燃机缸套活塞系统摩擦学与动力学的耦合问题进行了研究。
The tribological properties of PTFE-embedded tin bronze bearing material were studied using a pin-on-disk friction and wear tester.
用端面摩擦磨损试验机考察了锡青铜镶嵌聚四氟乙烯(PTFE)自润滑轴承材料的摩擦学特性。
The tribological performances of nano-Cu additive were tested in the condition of different loads by friction wear test machine.
通过摩擦磨损试验机测试纳米铜添加剂在不同载荷下的摩擦学性能。
The method appraises the temperature characteristic of boundary film of lubricating oil through tribological tests at different temperature points.
通过在不同温度点上对润滑油进行摩擦学试验来评价润滑油边界膜的温度特性;
The tribological characteristics of Fluosopolymer alloy (F50-1) at high temperature were experimentally studied with a pin-disc-type apparatus.
在销盘式试验机上对氟塑料合金(F50 - 1)的高温摩擦学特性进行了试验研究。
Contact problem is an important portion in the tribological problem analysis, because the non linearity of contact problem makes the engineering analysis and research relatively difficult.
接触问题是摩擦学问题分析中重要的一部分,由于接触问题的非线性,使得工程分析研究较为困难。
The tribological characteristics of cast iron under dry sliding condition was systematically investigated.
系统地研究了铸铁材料在干滑动摩擦条件下的摩擦学特性。
The paste lubrication film of CSL and lubricating grease forming on frication face remarkably improved tribological characteristic of graded self lubrication composites under grease lubrication.
脂润滑条件下,复合固体润滑剂与润滑脂结合在摩擦面上形成的膏状润滑膜使梯度自润滑复合材料的摩擦学性能显着改善;
The pressure- viscosity (P- V) coefficient and solidification pressure values of lubrication oils are key testing date for the application of elastohydrodynamic theory to tribological design.
润滑油的压粘系数和固化压力是弹流理论应用于摩擦学工程设计的关键试验数据。
The effect is remarkable for improving the tribological properties of the materials' surface to add rare earth elements in the process of surface modification.
表面改性过程中加入稀土元素对改善材料表面的摩擦学性能有显着的效果。
The principle of magnetic-fluid reciprocating shaft seal is introduced, some problems of its design and application are analyzed from the point of view of tribological design.
介绍了磁流体往复轴密封的原理,从摩擦学设计角度分析了其设计和使用中要注意的问题。
Lubrication design model are shown Combining lubrication design with strength design, the tribological design model of straight cylinder gear is created.
建立直齿圆柱齿轮传动的强度设计模型和润滑设计模型,将两者有机结合得出摩擦学设计模型。
The analytic results show establishing proper simulation model and attaching parameter design approach are greatly good realization methods of solving the problems of tribological simulation.
分析结果表明,建立正确的仿真模型并辅以参数化设计方法是解决摩擦学仿真问题非常好的实现方法。
The content, method and the problem to be solved of tribological calculation on large automobile panel were researched.
探讨了大型覆盖件摩擦学计算的内容和方法以及摩擦学计算应解决的问题。