英汉例句

• non uniform temperature distribution causes deviation in emission current, the error of which is less than 5% for the shortest length of diode cathode.

  对阴极温度的不均匀导致的发射电流偏差进行了计算分析，并首次得到了发射电流误差小于5%的阴极丝最小长度的计算公式。

• it is found that the more uniform temperature distribution could be acquired by strengthening the cooling in the fillet part of the h-beam in the controlled cooling process.

  结果表明：在轧后控制冷却过程中，若冷却水集中从h型钢腿部外侧对其腰腿接合处进行快速冷却可获得较均匀的温度分布。

• therefore, to maintain uniform temperature distribution of the blank is crucial for the cooling system design of the die.

  因此使板料在成形过程中保持均匀的温度分布是模具冷却系统设计的关键。

• the production verifies that the desirable filling can be formed in the optimized ingate, which plays the uniform temperature distribution in the die and eliminates the cold shut in fi…

  实际生产表明，改进后的内浇道形成了较理想的流态，使模具温度分布均匀，同时消除了铸件充型远端的冷隔缺陷。

• in order to reach uniform temperature distribution in tunnel bogie hearth furnace, the technology of pulse firing control of high velocity burner with air diffusion is proposed.

  为解决隧道式淬火炉炉温分布不均匀的问题，采用了高速调温烧嘴脉动燃烧控制技术。

• to achieve a completely uniform temperature distribution on the thin strip surface, orthogonal experiment is used for optimizing the heater structure.

  为了使薄板表面的温度均匀分布，应用正交试验法对感应加热器的结构进行了优化。

• it is demonstrated that selecting an optimum heat treatment process and making uniform temperature distribution in the furnace is favourable to improving the dynamic properties of aluminum alloy.

  试验表明，选择最佳热处理工艺和改善热处理炉温度场均匀分布对提高铝合金力学性能具有重要意义。

• simulation results show a smooth filling, uniform temperature distribution and few flaws such as gas inclusion and cold shut. a casting with a good quality was obtained.

  模拟结果表明，该浇注系统填充过程平稳，温度场分布均匀，所得压铸件气体夹杂和冷隔缺陷少，整体质量较高。

• a flat plate heat pipe(fphp)can remove hot spots and thus results in more uniform temperature distribution in electronic devices, and also heat sink can obtain better performance.

  平板热管具有很好的均热性，能够避免电子器件散热时热点的产生，使热沉具有更好的散热效果。

• the analysis results prove that the designed chip has uniform temperature distribution and higher temperature rising and cooling rates and could meet the requirement of pcr.

  分析结果表明设计的聚合物芯片温度分布均匀，有较高的升、降温速率，可以满足pcr反应的要求。