片语

welding butter joint焊接对接接头

angle welding joint角接接头

interior angle welding line joint内侧角焊缝接头

welding g joint焊接接合

dissimilar metal welding joint异种钢焊接接头

riveting and welding composite joint铆焊组合接合

welded splice焊接接头

Transverse Welding Joint横向焊缝

butt welding joint对焊接头

英汉例句

• The defects of welding joint for Marine platform structure, the harm and the cause of every defect were analyzed.

  分析了海洋平台结构焊接接头的缺陷及各种缺陷的危害、成因。

• The deformability of under-matched X80 grade pipeline steel welding joint was studied through Finite Element Method.

  采用有限元法对低匹配条件下x 80钢级管线钢焊接接头的变形能力进行了研究。

• This process is joint Lou broke traditional tin soldering shop, greatly reduce the cost of manufacture process, the difficulty, shorten the production cycle, and improve the welding joint intensity.

  该工艺打破了娄似接头采用传统的铺锡钎焊方法，大大降低了工艺程难度、制造成本，缩短了生产周期、提高焊接接头的强度。

• By orthogonal experiment, the sequence of technological parameters of friction welding effecting the strength of the welding joint is friction pressure, upset pressure and friction time.

  通过正交试验得出摩擦焊工艺参数中对接头抗拉强度的影响的顺序是摩擦压力、顶锻压力、摩擦时间。

• Principle of exothermic welding technique, properties of welding joint of cathodic protection cable and cost economization of the process are discussed, too.

  介绍了铝热焊接技术的原理、阴极保护电缆焊接接头的性能及经济效果。

• Basing on SYSWELD software, stress of in-service welding joint of X70 pipeline steel has been simulated, and residual stress of in-service was compared with routine welding.

  采用SYSWELD焊接模拟软件对X70级管道在役焊接接头应力进行模拟，并将在役焊接残余应力与常规焊接进行对比。

• This paper introduces the method to the defect location in the scarf welding joint by ultrasonic test, which can be adopted in the construction site.

  探讨了斜面焊接接头超声波探伤中缺陷定位的方法，可供现场施工实际探伤时采用。

• The early losing effectiveness causes of the superheater pipe welding joint were investigated and analysed.

  针对某电厂异种钢焊接接头高温早期失效的过热器管件进行了调查研究和失效分析。

• This paper proposes a procedure for artificial neural network (ANN) in spot welding, and establishes spot welding parameter selecting ANN systems and spot welding joint quality predicting ANN systems.

  将人工神经网络技术(ANN)引入点焊领域，建立了点焊工艺参数选择ann系统和点焊接头质量预测ann系统。

• The mechanical factors for the property of welding joint are welding defects, discontinuity of joint shape, welding residual stress and welding distortion.

  通常，影响焊接接头性能的力学因素有焊接缺陷、接头形状的不连续性、焊接残余应力以及焊接变形。

• We welded the high strength steel BIF340 in different spot welding processing parameters, the structure and property of the welding joint are analyzed.

  采用不同的点焊工艺参数对高强度钢板BIF 340实施焊接，并对焊接接头进行组织性能分析，研究点焊参数对BIF 340焊接性能的影响。

• Aim at 7075 aluminium alloy vacuum electronic beam welding, using nonlinear finite element, the numerical simulation of the residual stresses distribution in welding joint was made.

  针对7075铝合金中厚板真空电子束焊接过程，采用非线性有限元法，对焊接接头的残余应力分布进行了数值模拟。

• The bending test is the necessary inspection item of titanium plate and welding joint for the manufacture of titanium vessel.

  冷弯试验是钛容器制造中对铁板和焊接接头的必保检验项目。

• The present paper introduces the progress in research of welding joint properties and welding consumables of P92 steel.

  综述了P92钢焊接接头性能及其焊接材料的研究进展。

• Based on Linear interfacial Fracture Mechanics, a new welding joint model-multi layered interfacial model is proposed in this paper.

  基于线性界面断裂力学，提出了焊接接头的新模型—多层模型。

• The results indicate that the width of dynamic recrystallization zone of friction welding joint between TC4 Ti alloy and LD10 Al alloy increases under the electromagnetic field.

  结果表明：外加电磁场作用使TC4钛合金与LD10铝合金摩擦焊接头铝合金侧动态再结晶区宽度增大；

• Through hardness test, impacting test, SEM of failure surface and microstructure observation, the relationship between the toughness and its microstructure of welding joint of T92 steel was studied.

  通过硬度试验、沖击试验、断口扫描和金相组织观察，研究了T92钢焊接接头的韧性与组织的关系。

• A new view of characteristic zone of fusion welding joint is put forward through observations and researches of many fusion welding joints.

  通过大量的熔化焊接头试样的观察和研究，提出了熔化焊接头特征区域划分新方案。

• For such critical structures as boilers and pressure containers, complete welding joint is required.

  锅炉及压力容器等重要结构的焊接，要求接头完全连接。

• This paper researches the effects of undercut defect on stress concentration in welding joint of pressure pipe by means of the finite element method software ANSYS.

  从数值模拟入手，采用大型有限元软件ANSYS研究了不同尺寸、不同位置的咬边缺陷对压力管道焊接接头应力集中系数的影响。