片语

welding stick焊丝，[机] 焊条；焊棒

TIG WELDING WITH WIRE SOLDER氩焊添丝

welding-wire reel焊丝卷圈

Welding the wire焊把线

core welding-wire焊芯

welding-wire steel焊丝钢

welding g wire machine焊线机

Inconel690 welding filler wireIncone1690焊丝

welding g wire焊丝

soldering wire焊丝

英汉例句

• after enhancing the sending welding wire machine, it can become the equipment of both sending pulverized solder and sending welding wire.

  提出增加送丝机， 组成既可送粉焊接又可送丝焊接的两用设备。

• to draft the chemical composition, rolling system of wire rods for welding wire for test, and the heat-treatment and drawing system for welding wire production.

  拟定了试验用焊丝盘条的化学成分、轧制制度，以及焊丝生产的热处理和拉拔制度。

• for the tensile strength, the parent material is the biggest, the welding joint is the second, and the welding wire is the worst.

  就抗拉强度而言，母材最大，焊接接头次之，焊丝最小。

• this welding wire oven is made by infrared heating new technology, with stainless steel inner, the highest temperature is 500℃.

  本电焊条烘箱，远红外加热新技术制造，不锈钢内胆，温度最高500℃。

• using a high-performance bldc motor and pwm driving circuit ml4425, the gwam welding wire feeding device is directly driven.

  采用高性能无刷直流电动机及其pwm驱动电路ml4425，研制了直接驱动的gwam焊送丝机。

• this work researched on the weld metal toughness of the submerged arc welding wire wq - 1. by using wq -1 wire and sj101 flux, welding was done in plates of 14mnnbq steel.

  本文采用示波沖击试验方法，对武钢技术中心开发研制的wq-1高韧性埋弧焊丝的焊缝金属强韧性进行了研究。

• this welding process, with continuous welding wire feeding, fast deposit speed and quality welding pass, is especially suitable for long distance pipeline with large diameter and thick wall.

  全位置自动焊接技术的特点是，焊丝可以连续送进，焊丝熔敷速度快，焊接质量较高，尤其适用于大口径、厚壁管的焊接。

• the welding scheme and selection of welding wire development of welding equipment and torch, the analysis to the technical problems with procedure and how to solve them are included.

  其内容有焊接方案及焊丝的选择、焊接设备及焊枪的研制以及对工艺技术问题的分析和解决措施。

• finally, the development trend of welding wire for x100 grade high performance pipeline steel was pointed out.

  还指出了x100级别高性能管线钢制管用焊丝的发展方向。

• the welding materials are high toughness welding wire wer60 and rich argon shielding gas.

  焊接材料为高韧性气保焊丝wer60及富氩保护气体。

• the research proves that this welding is a new kind of high efficiency, energy saving and material saving method, especially in the alloy filling welding wire of stack welding, it has the well effect.

  研究证明：双丝单弧预热填丝焊是一种高效节能节材的新方法，尤其是在焊丝掺合金堆焊方面有很好的效果。

• the production of high strength alloy welding wire includes pickling, wire drawing, anneal, cleaning, vacuum package and etc.

  高强度合金焊丝的生产包括酸洗、拉拔、退火、清洗、真空包装等工序，拉拔可采用「四拉四退」的生产工艺。

• this welding technology is constituted by the combination of welding wire composition, the diameter of a wire, and current waveform.

  本焊接技术由焊丝成分、焊丝直径和电流波形的组合构成。

• this article presents the development of golden bridge flux cored welding wire and introduces the key technology in manufacture process.

  本文介绍了金桥药芯焊丝的发展历程和药芯焊丝制造过程中的关键技术。

• applying ultrasonic cleanout to welding wire treatment before plating can lighten the burden of electrolysis alkali cleanout, raise speed of chemical cu-plating.

  超声波清洗应用于焊丝镀前处理，可减轻电解堿洗的负担，提高化镀速度。

• the hardware of the system comprises the five sub-systems, i. e. welding power source, arc length controller, welding wire feeder, welding head traveller and detector.

  此系统的硬件主要包括五个子系统，即：焊接电源、弧长控制器、送丝机构、焊矩行走机构和检测机构；

• the welding wire is used for welding low carbon structural steel and low alloy steel. such as ships, bridges heavy-duty machines, boilers and pressure vessel etc.

  该焊丝用于焊接低碳钢和低合金钢结构，如船舶、车辆、桥梁、工程机械、锅炉和压力容器等。

• the new design of the welding torch clamp make the welding torch reposition expediently, thus ensure the welding wire in the centering position during welding process.

  新设计的焊枪夹具可使焊工在焊接过程中方便地对焊枪进行多方位的调节，保证了在焊接过程中焊丝对中良好；

• the properties, producing process of welding wire for roll overlaying and breakdown treatment in its drawing production are introduced.

  介绍了轧辊堆焊使用焊丝的性能、生产工艺及焊丝在拉拔过程中的故障处理。

• the oscillating control of welding wire for electroslag welding have been realized by plc.

  利用plc技术实现了电渣焊焊丝摆动系统的控制；

• er110s, a kind of low-carbon steel welding wire alloy, which is processed by a traditional annealing, is often broken for the work-hardening in the follow-up drawing process.

  传统工艺退火处理后的合金低碳钢焊丝er110s，在后续的拉拔加工中，加工硬化导致经常断丝；