英语释义

1. to ascertain the caliber of (something)

2. to determine, rectify, or mark the graduations of (something, such as a thermometer tube)

3. to standardize (something, such as a measuring instrument) by determining the deviation from a standard so as to ascertain the proper correction factors

4. to adjust precisely for a particular function
calibrate a thermometer

5. to measure precisely
carefully calibrate the dosage of a medicine especially to measure against a standard

6. to adjust or mark (something, such as a measuring device) so that it can be used in an accurate and exact way

7. to measure (something) in an exact and precise way

8. to ascertain the caliber of (as a thermometer tube)

9. to determine, rectify, or mark the graduations of (as a thermometer tube)

10. to standardize (as a measuring instrument) by determining the deviation from a standard so as to ascertain the proper correction factors

片语

electroacoustic calibrator电声式校準器

regulator监管机构，监管者；调整者；校準器

range calibrator距离校準器

portable calibrator手提式校正仪

CT Calibrator送至电流互感器校验仪

Working Calibrator工作校準品

urethral calibrator尿道测径器

calibrator group校準器组件

guarded calibrator保护校正器

etalon标準量具；[仪] 校準器

dose calibrator放射线剂量校準器

英汉例句

• design of virtual calibrator for instrument transformer.

  一种虚拟互感器校验仪的设计。

• vacuum calibrator is built on the basis of separate shaping technique, and the quick vacuum adjustment system ensures the vacuum degree and quick shaping.

  真空定型台采用分腔定型技术，快速真空调节系统保证稳定的真空度和管材快速成型。

• switch on the electronic calibrator unit.

  打开电子显示器装置。

• the display calibrator assistant walks you through calibrating your display.

  「显示器校準程序助理」会引导你完成显示器的校準。

• development of virtual instrument based calibrator for electronic current transformer.

  基于虚拟仪器的电流互感器校验仪的研制。

• in the ic testing and adjustment using ic, signal generator and charge calibrator are often be used.

  在集成电路的检测及应用电路的调试中经常要用到信号发生器和电荷校準仪。

• the instrument is compliant with iec 61672 and can be supplied with an acoustic calibrator if you wish to verify your measurements – as really should be done.

  该仪器符合iec61672标準，可与声校準器提供的，如果你想验证你的测量 -作为真正应该做的骏凯电子批发英国 pulsar 噪音计。

• objective to observe whether the same calibrator can directly calibrate the different analytic systems.

  目的观察同一校準品能否直接用于校正非配套检测系统。

• calibration accuracy is improved using the developed calibrator and system calibrating method .

  采用系统标定方法和相应的标定器将提高地震仪器的标定精度。

• during the adjust of the process instrument, the function of the calibrator is very important for the uncertainty, which is about the dynamic parameter the static parameter etc.

  在过程控制仪表进行检验时，校验仪器的性能直接关系到被校验仪表的动态、静态特性等有关参数的可信度。

• it is introduced in this paper that the design and function of the new-type hewl instrument transformer calibrator and its testing equipment for small current and voltage.

  介绍了新型hewl互感器校验仪的设计、功能以及用它对小电流互感器与小电压互感器的具体检定方法。

• the calibrator either tests or emits thermistor signals, with simultaneotisly emitting passive thermistor signals and displaying corresponding temperature values as its unique characteristics.

  该校验仪具有收发热电阻信号的双重功能，独到之处是可发出无源热电阻信号及对应的温度值。

• at present, some of the field calibrator has little incorrect connection judging function, for the electric energy metering devices running state detection work is far from sufficient.

  目前一些现场校验仪具有少量错误接线判断的功能，对于电能计量装置运行状态检测工作来说是远远不够的。

• connect a warmed-up sensitive voltmeter or nanovoltmeter to a low volt age calibrator and output zero volts.

  将一个已预热的灵敏伏特计或纳伏表连接到一个低压校準器，并输出零伏。

• the third chapter introduces the theory of transformer and the theory of transformer calibrator .

  第三章介绍互感器的基本原理和互感器校验仪的校验原理。

• introduction was made to the method to use multifunction calibrator to calibrate oscilloscope and as well as the evaluation to the uncertainty of its measurements.

  介绍了用多功能校準器校準示波器的方法，并对其测量不确定度进行了评定。

• the air calibrator was reformed as a standard air flowmeter, and it was used to calibrate other small range air flowmeter.

  空气校準器被改造成一台标準的气体流量计并成功地应用于其它小量程气体流量计的校準。

• so the design of the cooling system in calibrator is very important.

  因此，合理设计定型模冷却系统是定型模设计的重要环节。

• by using dual timing method the calibrator for calibrating coefficient of instrument of pulsed flow transducer is designed.

  利用双时间法设计了用于检定脉沖型流量传感器仪表系数的检定仪。

• set the calibrator to a new setting and produce a swaged assembly.

  在校準器上设置新的目标数据，进行扣压总成。

• steering by automatic pilot and by magnetic compass in stead of automatic pilot measure the exactness of magnetic compass by qualified calibrator and provide compass adjustment card.

  自动驾驶仪操舵和用磁罗经代替自动驾驶仪，通过合格的校準器来测定罗经的正确功能并提供罗经校正卡。

• the comparative measurement method for vacuum gauge calibration is introduced. the construction, principle and process of the calibrator are described.

  文章介绍了对真空规管和仪器进行校準的比对法，阐述了校準系统的结构、原理及校準方法；