片语

car-body vibration车体振动

metro car-body地铁车体

Car-body load车体承载力

carriage body[车辆] 车身

locomotive car-body机车车体

Car r Body Stamping第六届汽车车身沖压工程发展论坛

elastic car-body弹性车体

car like body类汽车物体

light car-body轻型车体

car r body车身

英汉例句

• with several feet of car body in front of the driver, the energy of a crash can be dissipated and the suddenness of the change in velocity can be reduced, they say.

  他们认为，如果驾驶员前方车体部分的尺寸能够达到几英尺长，就能消散碰撞产生的能量，降低速度变化的突然性。

• you do not need to separate the car body from the chassis.

  你不需要把汽车车身与底盘分开。

• the sensitivity analysis and optimization of car body structure were then carried out.

  最后，进行了基于成形因素的车身结构灵敏度分析与优化。

• according to the structure characteristic of high-speed car body , analysis and model is set up.

  根据高速客车车体结构的特点，建立了结构分析计算模型。

• if in the course of driving, the car body is found to have a slight jitter or offset, usually caused by tire failure.

  如果在行车过程中，发现车身有轻微的抖动或偏移，一般是轮胎引起的故障。

• it is easy to stamp out a car body nowadays.

  现在沖压一台小汽车车身已经很容易了。

• resistance to weld splatter has made it suitable for car manufacturers who specify speedy rail for lift-and-carry transfer lines for car body panel welding.

  电阻焊接飞溅了适合汽车制造商谁指定快速轨道升降机和进行传输线的车身面板的焊接。

• the paper discusses the realization of a visualized development environment for car body with complicated surfaces.

  本文讨论复杂曲面汽车车身可视化设计环境的具体实现。

• the four reactions that occur as a car body is being coated are listed below. the key word from the definition follows in parentheses.

  下面列出了涂装一台车身时发生的四个反应。定义的关键字写在括号中。

• with the introduction of car body manufacture techniques and quality control methods, a quality control system based on quality duty card is built up.

  首先对轿车车身制造工艺与质量控制技术进行了阐述，着重介绍了基于质量责任卡的质量管理系统。

• especially the passive safety issues such as pedestrian protection and the damage to after vehicle collision in car body exterior design are discussed in detail.

  特别就行人保护和碰撞后对车辆本身的损坏等被动安全性问题对轿车车身外部造型设计的要求，做了比较详细的讨论。

• a clear majority of bus body skeleton, and the car body and truck cab frame is not obvious.

  客车车身多数具有明显的骨架，而轿车车身和货车驾驶室则没有明显的骨架。

• industrial robot has been widely used for various process of car body assembling and welding.

  工业机器人广泛用于车身装焊生产的多个工艺过程。

• and then, using the material adjustment and stock thickness of car body, car body is optimized.

  然后采用更换车身各部分材料和调整材料厚度的方法对汽车车身进行优化。

• on the basis of computational fluid dynamics (cfd), adopting limited volume method, the external flow field of a car body is simulated.

  以计算流体力学（cfd）为基础，采用有限容积法模拟计算了轿车车身的外部流场。

• to adopt this method can build up car body wooden master model in shorter time and with cheeper cost. especially for those factories without modemmeasuring facilities and processing equipment.

  尤其是对于不具备现代化检测手段和加工设备的厂家，采用该方法可在较短的时间，利用较低的成本制造出轿车车身木质主模型。

• the paper introduces the data management and information system for car body on-line visual inspection station.

  介绍了为汽车白车身在线视觉检测站设计的数据管理和查询系统。

• it introduces car performance, tractive performance, fuel economy, waste-gas emission, ride comfort and car body torsional stiffness of svw santana 2000.

  对上海桑塔纳2000轿车整车性能：动力性、燃油经济性、废气排放、乘坐舒适性、车身扭转刚度作了介绍；

• a car body component made of steel sheet costs about €4 in its final form; the same part made from cfrp costs at least €200.

  一个由薄钢板制成的车体部件成品只需4欧元，而同样部件，用碳纤维增强塑料制则至少需要200欧元。

• development period of product is greatly reduced due to successful application of cad and cae in car body design, and quality of products remarkably improved.

  计算机辅助设计与辅助工程在轿车车身设计开发中的成功应用大大缩短了产品开发周期，并显着提高了产品质量。