片语

cold impact extrusion冷沖挤

cold-extrusion roller冷挤滚子

cold-extrusion protruding mould冷挤压凸模

cold forward extrusion前向冷轧压

cold-extrusion die[机]

metal cold extrusion press金属冷挤压机

cold compound extrusion technology复合冷挤压技术

英汉例句

• There are lots of advantages by cold extrusion for straight knurl nut in a single process.

  纹滚花螺母采用冷挤压一次成形新工艺，成效显着。

• On the problem of open compression die emerged in production, the part is analyzed and a new processing method is put forward. Cold punching technology is replaced by cold extrusion technology.

  针对敞开式压缩模在生产中出现的问题，对工件进行分析研究，提出新的工艺方法，以冷挤压工艺取代冷沖压工艺。

• The simulation results show that the cold extrusion process can greatly save copper materials and reduce production cost.

  模拟结果表明，所提出的冷挤压工艺可以极大地节省铜材料，降低生产成本。

• An analysis on the cold extrusion process and a technological experiment were made for the two spline ends of a slim drive shaft.

  细长传动轴两端花键头进行了冷挤压加工分析与工艺实验。

• The cold extrusion process can ensure forming of the cylinder.

  该工艺保证了该零件圆柱部冷挤压成形的顺利进行。

• In this paper, the cold extrusion process of 7a04 aluminum alloy was developed for the production of a double-cup workpiece with a deep hole.

  针对一种具有深孔的双杯形零件，对7a04铝合金复合冷挤压工艺进行了研究。

• With the development of cold extrusion technique, more and more is required of the properties of cold extrusion punches for ferrous metals.

  随着冷挤压技术的发展，对黑色金属冷挤压凸模的性能提出愈来愈高的要求。

• In this paper, the advantages of the manufacturing on the cutting copper tube joint with the cold extrusion heading technology are pointed out.

  文中指出了采用冷挤镦工艺代替切削加工生产铜管接头的优点。

• The verification tests of cold extrusion process and fatigue life of a spline shaft show that the analysis results agree well with those of testing.

  经花键冷挤压工艺试验和疲劳试验验证，分析结果和试验结果吻合很好。

• The cold extrusion technology characters for the part are studied and analyzed, the cold extrusion technology schedules are made, especially, several problems occurred in the cold ex...

  分析研究了该零件的冷挤压工艺方案，特别对冷挤压工艺中的几个主要问题进行了研究，它对该零件的实际生产具有较大的指导意义。

• It is certain that the application of cold extrusion process for spindle-foot spindle of thread spinner has a reference value to the forming of similar parts.

  这对纺机锭脚其他类似零件的成形工艺及其模具设计具有一定的借鑒作用。

• The distribution of lubricant film thickness and stress during the cold extrusion was unveiled from the calculated result.

  计算结果揭示了冷挤压过程中，润滑油膜厚度及油膜压力的分布。

• The advantage of the gear axis with cold extrusion technology replacing metal cutting working production are narrated, and the technological analysis for the gear axis part is conducted.

  叙述了采用冷挤压工艺代替切削加工生产齿轮轴的优点，并对齿轮轴零件进行了工艺分析。

• This paper mainly performs the design and mechanical analysis and research on cold extrusion mold of the gear axis in cars.

  本文主要对汽车用齿轮轴的冷挤压模具进行了设计和力学分析研究。

• This equipment is mainly applied to the cold extrusion forming of thin-walled tubes or annealing of metal tube coated curing.

  本设备主要适用于经冷挤压成形的薄壁铝管退火或金属管内涂液固化。

• Simulated test method-the method for estimating pressures of cold extrusion is presented.

  提出了一种估算冷挤压力的方法一模拟试验法。

• There are lots of advantages by cold extrusion for straight knurl nut in a single process.

  直纹滚花螺母采用冷挤压一次成形新工艺，成效显着。

• It's the key to analyze the forming feasibility, find out the way to calculate the forming force, select the suitable process parameter in open-die cold extrusion of rectangle spline.

  矩形花键轴是汽车传动的重要零件，矩形花键的无约束正挤压成形是一种先进的花键加工方法。

• The forming process by cold extrusion for the hood pedestal of the auto air_conditioner compressor and the design of the cold extruding die were introduced.

  介绍了车用空调压缩机罩体支架的冷挤压成形工艺及冷挤压模具设计，采用工艺试验的方法确定挤压坯料尺寸。

• This paper studies and discusses the forming analysis and forming method of cold extrusion for precision gear.

  对精密齿轮的冷挤压成形分析、成形方法进行了概述。

• A powerful drawing-thickening technology was prompted for double-cup-shaped workpieces, it combined the characteristics of cold extrusion with drawing process.

  结合冷挤压与拉深工艺的特点，以双杯形工件为对象，开展了沖锻成形过程的强力拉深增厚工艺研究。

• The mechanism of hydrodynamic lubrication during the process of cold extrusion was analyzed by means of the theory of tribology and metal forming.

  应用摩擦学和金属塑性成形理论，对冷挤压工艺中的流体动力润滑机理进行了分析。

• Stress on inlayed blocks of gear axis cold extrusion die and sleeves walls are modeled and ac-counted, and inlayed blocks are analyzed with ANSYS on the basis of stress result.

  对齿轮轴冷挤压凹模镶块及其套筒内壁建模并进行应力计算，根据应力结果对镶块的结构利用ANSYS进行分析，找出薄弱环节进行改进性设计，以提高模具的使用寿命，为同类设计提供参考依据。

• The effect of blank quality in cold extrusion on the damage way and service life of working parts (mould and die)is analysed, and some countermeasures presented.

  分析了冷挤压毛坯质量对模具的工作部分（上、下凸模和凹模）的损坏形式和寿命的影响，指出了保证毛坯质量应采取的措施。