片语

cut-tobacco drier烘丝机

cut-tobacco storage贮丝

cut out tobacco戒烟

Cut Leaf tobacco烟丝

cut-tobacco flavoring system加香控制系统

cut-tobacco weighing device烟丝称量装置

Production of cut-tobacco烟丝生产

cut t tobacco生切烟丝

cut t tobacco with perfume熟烟丝

英汉例句

• the results show that ignition temperatures of typical combustibles, such as tobacco leafs, stems, cut tobacco and conveyor belt were 310,230,240 and 370 ℃, respectively.

  结果表明：制丝车间典型可燃物烟叶、烟梗、成品烟丝和输送带的着火温度分别为310，230，240和370℃；

• the pipe network in pneumatic cut tobacco feeding system was simulatively regulated by using matlab language and fluid network analysis.

  运用ma tlab语言，采用流体网络分析法，对风力送丝系统中的风送管网进行了模拟调节。

• the filling value of expanded cut tobacco stem does not increased unlimitedly as steam flow rises prior to the drying process, but slowly increases to reach a certain extent before staying constant.

  膨胀梗丝的填充值并不会随着干燥前蒸汽流量的增加而无限制增高，而是到达某种程度后缓慢升高直至不变。

• the problem of cut tobacco drop from running feed dolly was then resolved and the environment of workshop was improved.

  改进后使用效果良好，解决了小车在运行中飘落烟丝的问题，改善了生产现场的环境。

• the filling power of dried cut tobacco is significantly influenced by drying methods, the temperature and moisture content of entrancing cut tobacco and drying medium conditions.

  烘丝方式、来料温度和水分、干燥介质状态参数等对烘后烟丝的填充力有显着影响。

• the design and implementation of the industrial moisture process automation system and the application in cut tobacco production line are described in detail.

  详细介绍工业水分过程自控系统的设计与实现以及在烟厂制丝生产线上的应用。

• this paper introduces a cut tobacco adsorbed conveyer belt for high speed cigarette machine which is designed and developed by oneself, and its technological process and parameter, mechanism design.

  吸丝带是烟厂吸附法输送烟丝的主要部件，易耗、成本高。本文介绍了自行设计、研制的吸丝带，其工艺流程、工艺参数及机械设计情况。

• impex technology can make the filling value of cut tobacco increase more than 90% and replaced completely cfc expansion technology currently used.

  impex烟丝膨胀完全可以取代目前广泛采用的cfc（氟利昂）膨胀工艺，使烟丝的填充值提高90 ％ 以上。

• the application of plc in cut tobacco drying process is presented. the hardware configuration and software design of the system are focused.

  介绍plc控制在烟丝烘干过程中的应用，较详细地叙述了系统的硬件配置和软件设计。

• the working process of cut tobacco feeding, the air circuit and software(design) of the control system, the input and output connections of plc were introduced.

  介绍了烟丝喂入的工作过程，对于该系统的气路系统、plc输入和输出接线以及软件设计进行了论述。

• after control system modification, the running reliability of the dryer was increased, the stability of processing parameter was ensured, and cut tobacco quality was improved obviously.

  改进后提高了设备运行的可靠性，确保了烘丝机工艺参数的稳定，制丝质量也得到明显改善。

• the process flow of laboratorial cut tobacco treatment and the application of omron plc type cpm2a-30cdr in its control system were introduced.

  介绍了实验室烟丝处理系统的工艺流程，以及omron公司cpm2a_30cdr型plc在该控制系统中的应用。

• it also said the drop in combined cigarette and fine cut tobacco volumes is partly due to a change in u. k. trade buying patterns which will shift some volumes from the first to the second half.

  该公司还说，卷烟与细切烟的合并销量下降，有部分原因是英国的商业购买模式出现了变化，这个变化会使一些销量从上半年转到下半年。

• the indian government is trying to reduce area under the crop in line with developed countries to cut tobacco consumption.

  印度政府正在试图减少烟草种植面积，以便与减少烟草消费的发达国家保持一致。

• to solve the problems, such as cut tobacco segregation, duct blocking, dust leaking, etc, a lateral-suction cut tobacco pneumatic conveying system was developed.

  为解决传统气力输送系统的烟丝分层、吸丝管堵丝和漏灰等问题，研究开发了水平侧吸式烟丝气力输送系统。

• the industry feels it would take years to implement the programme to cut tobacco production, and import is always an option.

  烟草业感到实施减少烟草生产的项目需要数年时间，进口永远是一个选择。

• in this paper the technological process flow chart of cut tobacco workshop is presented and the quality factors of making cut tobacco are analyzed briefly.

  本文首先给出了卷烟厂制丝车间工艺流程图，并分析了制丝工艺的质量因素。

• the samples of cut tobacco after cooling and storing were tested with dd60a and d51, the(results) were analyzed and the performances of these two densimeters were compared and evaluated.

  分别采用dd60a和d51 密度仪测定制丝生产线冷却后和储丝后成品烟丝样品，并将两者的测定结果进行分析，对这两台仪器性能进行比较并作出评价。

• the application of plc in cut tobacco drying process is presented. the hardware configuration and software design of the system are focused. the operation shows excellent result.

  介绍plc控制在烟丝烘干过程中的应用，较详细地叙述了系统的硬件配置和软件设计。投入运行结果表明效果良好。

• we analysis several kinds of causes which influence flavouring precision of cut tobacco in this article, and introduce the scheme which can solve the problem.

  本文分析了影响烟丝加香精度的几种原因，并详细地给出解决该问题的技术方案。

• the ratio of cinnamate series ester flavors hold in cut tobacco is close to 100%, the transfer ratio of filter tip, mainstream smoke is relatively high after smoke.

  肉桂酸酯系列单体在烟丝中的持留率接近100%，在抽吸后的主流粒相、滤嘴中的转移率都相对较高。

• in order to improve the role of co2 expanded cut tobacco in cigarette blends, the classification of tobacco to be processed for co2 expansion was tested.

  为提高co2膨胀烟丝在卷烟配方中的使用等级和掺兑比例，进行了co2膨胀烟丝分类加工应用研究。

• meanwhile, by adjusting the internal air supply of cigarette making machine, stem-removing can be more efficient and up-to-standard cut tobacco in the stem ca…

  并通过对卷烟机内部风力状况的调整，使其既可提高卷烟机除梗效率又达到减少梗中含合格烟丝的目的。

• the paper introduces the design idea and principle of a microcomputer—controlled spicing system for cut tobacco and discusses the design of principal software and hardware of the system.

  本文叙送了一套微机控制烟丝加香系统的设计思想和工作原理，并对系统中主要软件、硬件设计作了论述。

• the method has the functions of lowering the quality hidden danger of the cut tobacco and lightening the labor intensity of a worker.

  使用本方法具有降低烟丝质量隐患，减轻工人劳动强度的作用。