片语

Dental elastic impression material牙科弹性印模材料

elastic deformation material弹性变形体

low elastic modulus material低弹模材料

elastic epoxy material弹性环氧材料

elastic plastic material弹塑性材料

rubberized elastic fibre material胶粘纤维弹性材料

Elastic woven material纺织的弹性布料

elastic grain material弹性颗粒材料

perfectly elastic plastic material理想弹塑性材料

英汉例句

• A mixed numerical-experimental model method was proposed to estimate the panels equivalent elastic material parameters.

  本文中采用数值-试验混合模型方法对该种夹层板的等效材料性能参数进行了优化反求。

• With elastic material parts in pressures deformation, remove the external forces and reinstatement.

  用弹性材料制成的零件在外力作用下发生形变，除去外力后又恢复原状。

• The spring is in the form of a ring-shaped body (7) manufactured of an elastic material having two axially spaced-apart ends (13, 14).

  弹簧的形式为由弹性材料制成且具有两个轴向间 隔分开的端部（13、14）的环状主体（7）。

• Blended elastic material was obtained with components as PVC, SBS, CPE and different fillers blended with other AIDS for modification.

  以pvc、SBS、CPE作为共混组分，采用不同的填充体系，与其他助剂进行共混改性，得到了共混弹性材料。

• The outer surface of back roller is the elastic material and the back roller is installed with one foil strip.

  背辊外表面为弹性材料，背辊上装有一条箔带。

• The cavity adopts a closed cell expansion joint between C frame and the elastic material such as foaming agent, packing, sealed with sealant surface.

  框与洞口之间的伸缩缝内腔均采用闭孔泡沫塑料，发泡剂等弹性材料填塞，表面用密封胶密封。

• When modeling any material, the spring can be used to represent an ideal elastic material and the dashpot an ideal viscoelastic material.

  当模型的任何材料，弹簧可以用来代表一种理想的弹性材料和粘弹性阻尼器的理想材料。

• The adhesive elastic material layer arranged between the restricting layer and the thermo-cured reinforcing layer is made of butyl rubber.

  在约束层和热固化加强层之间有丁基胶的粘弹性材料层。

• Anti-static Wrist Strap made of mix-woven with elastic material and silver conductive fiber. It has good conductivity with more comfortably, adjustable length and unbreakable ground cord.

  防静电手腕带使用柔软而极有弹性的银纤维导电丝混合编织而成。此手腕带导电性、舒适性好，长度可任意调节，弹簧接地线不易断裂。

• Secondly, the structure「s mechanical model that based on the elastic material mechanical characteristic and a certain enclasped state and enclasped thinking of multi-layers」 shell is established.

  其次，从弹性垫层材料的力学特性角度出发，建立组合圆筒裱糊装配结构的力学模型。

• A new reflection wave method is presented for inspecting the pile integrity of the non-linear elastic material under the condition of low strain.

  对非线性弹性材料桩身完整性检测的低应变反射波新方法进行了研究。

• The water hammer in a pressure pipe in prototype can be in terms of theory simulated in a model, based on the gravity similarity and elastic material similarity.

  理论上讲，按重力相似準则设计模型，并保证模型材料与原型材料的弹性相似，即能在模型上模拟原型的水击现象。