片语

dc electric-arc furnace bath直流电弧炉熔池

single-phase electric-arc furnace单相电弧炉

three-phase electric-arc furnace三相电弧炉

electric c arc furnace电弧炉

5 ton electric-arc furnacet电炉

one-phase electric-arc furnace单相电弧电炉

steelmaking in electric-arc furnace电弧炉炼钢

ton electric-arc furnacet电炉

electric-arc furnace steelmaking电弧炉炼钢

英汉例句

• electric arc furnace (eaf) used in metallurgy industry often causes unbalanced three-phase load power, and therefore generates severs flicker to the grid, which seriously impact the power quality.

  在冶金工业中使用的电弧炉可引起电网三相负荷不平衡，产生谐波引起电流闪变，严重影响电网电能质量。

• the simulation results show that the coordination of the three of electric arc furnace electrode is greatly enhanced via this model , the co-ordination relations between each greatly improved;

  仿真结果表明，此模型大大提高了电弧炉电极的三相统筹性，使得每个电极之间的统筹关系得到很大的改善；

• principles of pyrogenic process, wet process and other methods are more fully described. the feasibility of the technology of comprehensively treating electric arc furnace dust is discussed.

  详细陈述了火法、湿法以及其它方法处理电弧炉炉尘的原理，并且简述了这些工艺的可行性。

• the non-linear operation reactance model of the 32 mv·a high impedance electric arc furnace was established.

  根据测量结果建立了石钢32 mv.a高阻抗电弧炉工作电抗模型。

• by means of science and technology innovation, a new function has been established , that is, electric arc furnace is in stead of submerged arc furnace for producing nickel-chrome alloy.

  通过科技创新，开辟了电弧炉的冶炼新功能——电弧炉当作矿热炉使用，生产镍铬铁。

• the operation of bubbly slag submerged - arc is a new technology of electric arc furnace smelt.

  泡沫渣埋弧操作是电弧炉炼钢的一项新技术。

• based on the characteristics of dc electric arc furnace the heat transfer and the measures to improve it are introduced.

  从直流电弧的特征出发，分析了直流电弧炉的传热及改善直流电弧炉传热的途径。

• this paper mainly introduced the technological characteristic of melting low phosphor and low sulfur steel by ultra high power electric arc furnace without oxygen.

  主要介绍超高功率电弧炉在无氧状态下冶炼低磷、硫钢的工艺特点。

• the top-bottom combined blown process for the electric arc furnace has advantages of low cost, ease of operation and satisfactory agitation results.

  电弧炉顶底复吹技术，具有成本低，操作方便，搅拌效果好等优点。

• the development and application of the new deoxidizer sic in electric arc furnace steelmaking are studied in the paper.

  本文介绍电炉炼钢开发应用碳化硅新型脱氧剂的情况。

• the heat of electric arc furnace comes from the bars of carbon inserted through the roof of the furnace. these bars are called electrodes because they carry electricity.

  电弧炉的热量是由穿过炉顶插入炉内的炭精棒产生的。这些碳精棒传送电流，所以称为电极。

• in order to assess the flicker caused by electric arc furnace, the simulation method to assess flicker and its application in electric arc furnace power system was studied.

  为了仿真评估电弧炉引起的闪变严重度，对闪变仿真法及其在电弧炉供电系统中的应用进行了研究。

• the electric arc furnace steel-making productivity has gained rapid progress in the recent years.

  近几年来，电弧炉炼钢生产率有较大的提高。

• the electric arc furnace (eaf) dust pellets were reduced in isothermal condition in order to make the reduction similar to the eaf production, and the kinetics of the reduction process is researched.

  为使还原条件与实际电弧炉生产相接近，在等温条件下对电弧炉粉尘球团的还原过程动力学进行了研究。

• the paper describes the structure feature of the hydraulic cylinder for electrode positioning of electric arc furnace in guanggang and puts forward the thinking of sinicization.

  本文分析了广钢电弧炉电极位置控制液压缸的结构特点，提出国产化改造思路。