英语释义

1. to plate with an adherent continuous coating by electrodeposition

2. to coat (something) with a thin layer of metal (such as silver) by using electrolysis (sense 2)

片语

semiautomatic electroplating半自动电镀

Tin Electroplating镀锡

electroplating technique电镀技术

Electroplating Engineer电镀工程师

electroplating meter电镀仪

Nicholson Electroplating电镀厂爆炸案

Chromium Electroplating镀铬

plastic electroplating塑料电镀

electroplating bath[化工] 电镀槽；电镀浴

Zinc Electroplating镀锌

英汉例句

• the process flow extracting copper and nickel sulfate from electroplating sludge is put forward. the economic barometer of technology procedure is investigated by test.

  提出了含铜含镍电镀污泥综合利用的工艺流程，并用试验考察了各工序的技术经济指标。

• a typical industrial example of chelating precipitation to treat electroplating wastewater is reported in this paper.

  介绍了一个采用螯合沉淀法处理电镀废水的典型工业实例。

• that is, in electroplating process when the generation of the nucleation speed is greater than the growth of the nucleation rate, it can get meticulous, crystallization of closely spaced coating.

  也就是说，在电镀过程中当晶核的生成速度大于晶核的成长速度时，就能获得结晶细致、排列紧密的镀层。

• copper and plastic coefficient of expansion, and, therefore, more close to the plastic used in electroplating electroless copper plating coating layer as conductive.

  金属铜与塑料的膨胀系数比较接近，因此，在塑料电镀中常用化学镀铜层作为电镀的导电镀层。

• check the electroplating process, timely adjust equipment and system to provide.

  检查电镀流程，适时调整设备和制具。

• abstr: traditional electroplating traveling crane control system has the defects of accuracy hard to control accurately and expand space restricted.

  文章摘要：传统电镀行车控制系统存在控制精度难以精準掌控和拓展空间受局限等缺陷。

• electroplating mixing potions, uneven circulation or metal added less than consumption.

  电镀药水搅拌，循环不均或金属补充不及消耗。

• the modification electroplating position, pay attention to the current distribution line.

  重新修正电镀位置，注意电流分布线。

• k?nig believed these vessels to be galvanic cells, or parts of batteries, possibly used for electroplating gold onto sliver objects.

  卡维尼格认为，这些容器是原电池，或者是电池的组成部分，可能是用来把黄金电镀到银器上时使用的。

• new technological process to extract copper powder and nickel sulfate from electroplating sludge was reported in this paper, and the economic barometer of technology procedures was examined in test.

  提出了利用铜镍电镀污泥生产金属铜和硫酸镍的工艺流程，并用试验考察了各工序的技术经济指标。

• adjust the electroplating position, increase mixing effect.

  调整电镀位置，增加搅拌效果。

• the finish of the hand is achieved by electroplating involving several stages: leaching, degreasing, pre-nickelplating and nickelplating, along with numerous rinses.

  指针的表面电镀需经过下列几道工序：过滤、去油脂、预镀镍、镀镍，之间还穿插了数次清洗。

• " exclaimed yang guanghua, boss of a wenzhou electroplating factory.

  一家温州的电镀厂老板杨光华（音）说道。

• situation: mixing the better, electroplating mixing efficiency is high, the air, the water, the cathode have chemistry mixing way.

  搅拌状况：搅拌效果越好，电镀效率越高，有空气，水流，阴极摆动等搅拌方式。

• discovery phase of the problem: a multi-product electroplating grant request can not be up to standard .

  发现问题阶段：一次多批产品的电镀要求不能达到标準。

• electroplating is an electrochemical process by which metal is deposited on a substrate by passing a current through the bath.

  电镀是一种在电镀槽通上电流使金属沉淀在基体上的电化学过程。

• electroplating time mixing effect is bad.

  电镀时间搅拌效果不良。