英语释义

1. etch sense 2

片语

etching solution蚀刻剂；蚀刻溶液

gas etchant气体腐蚀剂

alkaline etchant堿性蚀刻剂

lographic etchant金相腐蚀液

buffered etchant缓沖腐蚀剂

selective etchant选择腐蚀剂

chemical etchant化学腐蚀剂

spent etchant废浸蚀剂

flat etchant光亮微蚀剂

silicon etchant硅腐蚀剂

英汉例句

• additionally, the quantity of copper dissolving in fecl 3 etchant and regeneration of spent etchants were also investigated.

  同时对蚀刻液的溶铜能力及失效蚀刻液的再生进行了初步的研究。

• as some companies make the identification process is used etchant is ferric chloride solution.

  作为一些企业的标识制作的工艺是，用作蚀刻剂的是三氯化铁溶液。

• after the etchant has etched through the organic resin to expose an underlying surface (12), the etchant is washed from the organic resin and the openings (32).

  在蚀刻剂已经蚀刻贯穿有机树脂而暴露出下方表面（12）之后，将蚀 刻剂从有机树脂和开口（32）中洗去。

• application of tmah solutions which is used as etchant in boron etch-stop and anisotropic etching process in the manufacturing of single-crystal and polysilicon pressure sensors is mainly discussed.

  介绍了四甲基氢氧化铵（tmah）溶液的腐蚀特性，论述了在单晶硅和多晶硅高温压力传感器的制作过程中，tmah腐蚀液在浓硼终止腐蚀和各向异性硅杯腐蚀两个制作工艺中的应用。

• an etchant (e. g. , oxygen plasma) can be applied to the inner surface 450 of the nozzle layer 420 to remove the portion of the non-wetting coating 470 on the inner surface 450.

  可以将蚀刻剂（例如，氧等离子体）施加于喷嘴层420的内表面450，以便去除内表面450上非湿润涂层470的一部分。

• experiments further show that the continuous regeneration of acidic copper etchant can be achieved and a high cop…

  实验进一步证实，一套以bdd电极为核心的装置可以实现蚀铜液连续再生，并能维持高蚀铜速度。

• when done, rinse the board under running water for at least 2 minutes to get all the etchant off.

  当这样做，沖洗委员会根据自来水为至少2分钟取得所有蚀刻小康。

• applications of electrochemistry in microsystem:confined etchant layer technique (celt) for the complex 3d pattern micromachining;

  电化学在微系统技术中的应用 ，包括用于复杂3d-图形微加工的约束 刻蚀剂层技术 （celt） ；

• for example, an etchant can be applied to the inner surface 450 through a descender (e. g. , descender 130 in fig. 1a) in the flow-path module.

  例如，可以通过该流动路径模块中的下睁部（例如，附图1a中的下降部130）将蚀刻剂施加于内表面450。

• if you don't have a microwave, put the whole bottle of etchant in a sink full of hot water for half an hour first.

  如果您还没有微波，把整个一瓶蚀刻在一个水槽充满热水为一个半小时第一。

• get a plastic tray whose bottom has about 4 to 8 times the surface area of the board, and put about 1/4「 of etchant in the bottom.」

  获得一个塑料托盘，其底部有大约4至8倍，比表面积的董事会，并把约1 / 4“蚀刻在底部。

• the etchant penetrates between the fine grains to etch the plate forming countless tiny cells that print in a soft texture.

  腐蚀剂在微粒间渗入，把版面腐蚀，造成无数小窝，印出一个柔和纹理。

• in this paper, the quick measurement of the copper with dicyclohexanonexalyl dihydrazone (bco) spectrophotometric method in the process of the overall utilization of waste fecl 3 etchant was studied.

  采用双环已酮草酰二腙（简称bco）光度法，对含铜三氯化铁蚀刻废液综合利用过程中铜的快速测定进行了研究。

• introduce an alkaline copper etchant used for the manufacture of printed circuit boards and the way it works.

  介绍了一种在现代印制板生产中使用的堿性蚀刻盐及其工作原理。

• it was relative to the etching depths, temperature and the etchant proportion and types.

  凸角侧向腐蚀程度与腐蚀深度、腐蚀温度、腐蚀剂配比等诸多因素有关。

• resist: coating material used to mask or to protect selected areas of a pattern from the action of an etchant solder or plating.

  阻剂：用来选择性保护某图形区域免受蚀刻剂，焊料或电镀影响的涂层材料。

• the pi pattern quality is affected by the pi precuring process and the etchant concentration.

  聚酰亚胺湿法腐蚀图形的质量受聚酰亚胺的预固化工艺条件和腐蚀液浓度影响。

• unused etchant may be isolated and recirculated during the etching process.

  在所述蚀刻工艺期间可隔离及再循环未使用的蚀刻剂。

• after the metal or alloy has been etched the chemical etchant is preferably rinsed with an organic solvent or more preferably with water to remove traces of the chemical etchant.

  在金属或合金，自此铭刻的化学腐蚀剂，是最好的沖洗，并用有机溶剂或水多，最好以消除化学腐蚀剂的痕迹。

• components of the etchant may be isolated and used to general additional etchant.

  可隔离所述蚀刻剂的组分并将其用于一般额外蚀刻剂。