片语

Abaqus有限元分析（软件名）

high-order finite-element analysis高次有限元分析

integral finite-element analysis整体有限元分析

parametric finite-element analysis method参数化有限元法

two-dimensional finite-element analysis二次元有限要素解析

finite-element analysis and calculation有限元分析与计算

the finite-element analysis program ANSYS有限元ANSYS分析

transient finite element analysis瞬态有限元分析

parameter finite-element analysis参数化有限元法

probabilistic finite-element analysis概率有限元

英汉例句

• with the welding spot fatigue lifetime pre-estimation method, by combination of the finite element analysis and stress calculation, the welding spot fatigue damage under actual load can be calculated.

  采用焊点疲劳寿命预估方法，通过有限元分析并结合应力计算，即可计算出实际载荷工况下的焊点疲劳损伤。

• advance a new detection which associate with finite element analysis and testing basing on testing of large hydraulic mechanical's fact press is true or not.

  基于大型液压机实际压力是否达标的检测，提出了应用有限元分析和测试技术相结合的一种检测新方法。

• possibility and efficiency in the application of this method to large finite element analysis are illustrated by an example of the stress analysis for a section of a cable stayed bridge.

  以斜拉桥桥段的应力分析为例，说明在大型有限元分析中采用分阶段计算方法的可能性和有效性。

• under the condition of three kinds of nonlinearity the stress and strain distribution of the road wheel is calculated with finite element analysis software ansys.

  建立了负重轮的三种三维有限元力学模型，在考虑三重非线性的情况下，用ansys有限元分析软件计算了负重轮的应力应变分布。

• conclusion three dimensional finite element analysis is a kind of convenient and practicable method to be used as the confirmation and supplement of experimental biomechanics study of human being.

  结论三维有限元分析方法是一种简便实用的生物力学研究方法，可作为实验生物力学研究的验证和补充方法。

• complete finite element analysis is conducted on pile frame of syr200 rotary pile drill with the model, which provides guiding reference for the design of pile frames.

  使用这种模型对syr200旋挖鉆机桩架进行了整体有限元分析，分析对鉆孔机桩架的结构设计有指导意义。

• we ran finite element analysis stress calculations to determine where the frame needed to be reinforced for maximum strength and stiffness, then reinforced those areas with additional carbon fiber.

  我们跑应力有限元分析计算，确定了框架需要得到加强的最大强度和刚度，然后加强这些领域更多的碳纤维。

• the processing of load and displacement boundary condition is very important to the finite element analysis of strength and stiffness for crankshaft.

  载荷和位移边界条件的处理对曲轴强度刚度的有限元分析结果有很大影响；

• in the process of completing, the mechanism design requests are considered fully, some methods such as the computer assistant simulation design, finite element analysis and test verify are adopted.

  在完成过程中，充分考虑了铺设轮的机械设计要求，采用了计算机辅助仿真设计、有限元分析和试验校验的方法。

• with the popularization and application of cad/cam/cae, the technology of finite element analysis has been widely studied and applied by project designers, now has gained good economical benefits.

  随着cad／cam／cae技术的日益普及和应用，有限元分析等现代结构分析方法已为工程设计人员广为认识和采用，并取得了显着的技术经济效益。

• corrugation problem in the car trunk sealing strip edges is analyzed with the highly non-linear finite element analysis software ( marc ) . the structure and material is optimized.

  本文利用高度非线性有限元分析软件marc分析轿车行李箱密封条唇边的起皱问题，并对其结构及材料进行了优化。

• a finite element analysis demonstrated that minimizing bone and ligament removal resulted in greater preservation of normal motion of the lumbar spine after surgery32.

  有限元分析证实，最低程度的切除骨和韧带能够更大程度的保留术后腰椎正常活动范围32。

• with the development of modern mechanics methods and computer technology, many practical commercial finite element analysis software were introduced to the crane design calculations.

  随着现代力学方法和计算机技术的发展，大型的商用有限元分析软件被引进到起重机的设计计算中。

• according to the trial, we use finite element analysis program to conduct temperature field and thermal stress analysis of the pier under sunshine, and compared the outcome with experimental results.

  根据试验采用有限元分析程序，进行日照作用下桥墩的温度场和温度应力分析，并与实验结果进行对比。

• to examine the monitoring results, the finite element analysis is used to calculate the effect between jacked piles and soil.

  为了测斜仪技术检验监测结果的準确性，采用有限元分析方法计算静压桩与土的相互作用效果。

• and ansys is a large scale general finite element analysis software with abroad application.

  而ansys是得到广泛应用的大型通用有限元分析软件。

• a fluid structure interaction (fsi) finite element analysis (fea) model is established for the dynamic analysis of an hem with an inertia track and a free decoupler.

  以惯性通道-解耦盘式液阻悬置为研究对象，建立了其性能分析的液-固耦合有限元模型；

• taking the rubber spring of a hydraulic engine mount for car powertrain as an example, the method for finite element analysis (fea) of rubber isolators is studied in this paper.

  本文以汽车动力总成液阻悬置的橡胶主簧为研究对象，探讨了橡胶隔振器弹性特性的有限元分析方法。

• in this thesis based on engineering examples, some suggestions were put forward to control crack by finite element analysis of floor slabs.

  本文结合工程实例，对楼板的温度裂缝进行了有限元分析，并提出了一些预防裂缝的建议。

• mesh generating is a necessary procedure between geometric definition of part and its finite element analysis .

  有限元网格生成是零件几何定义和有限元分析之间必不可少的步骤。