英语释义

1. the property determining the depth to which a ferrous alloy can be hardened by quenching

片语

hardenability band淬透性带

strain hardenability受力变硬性

hardenability factor淬透因子

hardenability index淬透性指数

hardenability intensifier淬透性增强剂

hardenability ambit硬化性曲线

Tissue hardenability组织硬度

hardenability curve硬化性曲线，[机] 淬透性曲线

liver hardenability肝硬度

英汉例句

• the addition of nickel and copper improves the hardenability and the baldness.

  加入镍和铜，钢的淬透性提高，硬度增加；

• water-cooled bainitic steel used in hydraulic shelves pillar was developed to increase the hardenability of steels and trial production was carried out.

  为提高液压支架活柱用材料的淬透性，开发了液压支架活柱用水淬贝氏体钢，并进行了工业试制。

• a study has been made on the effect of intercritical heating on the transformation of the undercooled austenite and the hardenability of 45 steel.

  研究了两相区加热对45钢的过冷奥氏体转变及淬透性的影响。

• the results show that: the springback angle of bent tube increases with the bending angle, the gap between mandrel and tube, and the hardening coefficient, but decreases with the hardenability value.

  结果表明：回弹角随弯曲角、芯棒与管壁间隙及材料硬化系数的增大而增大，随材料硬化指数的增大而减小。

• when the strength being equal, it has higher, toughness and hardenability of inter-phase precipitation in comparison with low carbon bainite steel.

  与低碳贝氏体钢比较，在相同强度下有更高的韧性与低的相间沉淀临界冷速。

• the hardenability is irrelevant to the isothermal tempering temperature.

  淬透性与等温回火温度无关。

• the results of measurement of the 「c」 curve show that the steels designed have a high bainitic hardenability and the uniform structure within a bigger cross section can be obtained.

  「c」曲线测定结果表明，设计钢具有高的贝氏体淬透性，可在较大截面上获得均匀的组织和性能。

• principally from a standpoint of hardenability the authors have, proved the possibility in substituting mn for mo in high-cr cast irons.

  主要从合金淬透性的角度出发，证明了高铬铸铁中以锰代钼的可行性。

• the factors of effecting hardenability worth have more, found out its action mechanism and controlling method is the inquired emphasis in this article.

  影响淬透值的因素有多种，找出其作用机理和控制方法是本文探讨的重点。

• gear steel「s hardenability is predicted by nerve network.

  采用神经网络预测钢的淬透性；

• the results indicate that copper can improve hardenability of hbia effectively and increase the impact toughness as well.

  实验结果表明，铜可以有效的增加高硼铁基合金的淬透性，并且可以提高其沖击韧度。

• aiming at the motorcycle cylinder moving characteristics, the influence of the technological parameter, spot diameter and hardenability in the laser surface treatment.

  针对摩托车汽缸的运动特点，分析了激光处理工艺参数、光斑直径和硬化带面积、光束运动模式、硬式匹配等因素对激光处理的影响。

• a new way of directional cooling quenching has been used to study hardenability of alloy ductile iron.

  采用一种新的端淬方法，研究了球墨铸铁的淬透性能。

• the characteristics of boron element and its effect in cast steel are introduced. microamount boron can improve the hardenability and toughness of carbon steel.

  介绍了硼元素的特点及其在钢中的作用，微量硼可以明显改善钢的淬透性和韧性。

• it was shown that the steel has low hardenability and cold-cracking susceptibility during welding with preheating temperature of 50 ℃ or above and a large restraint.

  实验结果表明：钢的焊接淬硬倾向低，预热温度50℃以上可完全避免焊接冷裂纹产生；

• conversely, according to the demand of hardening depth of a certain diameter of steel sphere, a steel kind of suitable hardenability can be selected.

  反之，也可根据对某一直径钢球的淬硬层深度的要求，选择具有适当淬透性的钢种。

• here an overview of the influence of porosity and alloy content on the jaminy hardenability of ferrous pm parts is presented.

  这篇文章评述了人们不大注意的铁基粉末冶金零件整体淬火时，孔隙度与合金含量对其淬透性的影响。

• through calculating the cooling curve of standard top quenching specimen and cct-diagram , the hardenability curves of alloy steel are calculated.

  本工作通过计算标準顶端淬火冷却曲线，并利用计算得到的cct曲线和数据，对合金钢淬透性曲线进行了预测。

• the present paper discusses the effect of baking temperature, baking time and pre-strain on the bake hardenability of ultra low carbon bake hardening steel(ulc-bh steel).

  研究分析烘烤温度、烘烤时间、预应变量等烘烤条件对超低碳烘烤硬化钢烘烤硬化性能的影响。

• the algorithm of calculating the equivalent distance of the jominy sample was deduced by making use of the same cooling time in the hardenability sensitive temperature range as the cooling criterion.

  以淬透性敏感区间内的冷却时间相同为冷速判据，得出了直接计算等效端淬距离的算法；

• in order to use the established ann model conveniently, the hardenability prediction software of boron steels is programmed by means of matlab6.5.

  为了方便使用所建立的模型预测硼钢的淬透性，采用matlab6.5编制了硼钢淬透性预测软件。

• the emphases are put on the cooling curve analysis, hardenability prediction, quenching methods, distortion, modeling microstructure and process, gas quenching, water gas and spray quenching.

  着重就冷却曲线分析，淬透性预测，淬火方法和变形，显微组织和过程模拟，气淬及水汽和喷射淬火等专题作了评述。

• the effects of baking temperature, baking time and prestrain on the bake hardenability and dent resistance of isotropic sheet steel and bh sheet steel produced by batch annealing were studied.

  研究了烘烤温度、烘烤时间和预拉伸应变量对罩式炉退火工艺生产的各向同性钢的烘烤硬化性的影响，并与力学性能相当的冷轧烘烤硬化钢进行了对比。

• it」s a feasible practice to quench in air for castings made of steels with higher hardenability to reduce or avoid its deformation and crack during heat treatment process.

  采用高淬透性钢进行空冷淬火是一种减少铸件热处理变形和开裂的有效措施。

• heat processing: normal heat treating and chemical heat treating of steel and nonferrous metal; testing the hardenability of steel; surface treatment of steel.

  热处理：钢及有色金属的常规热处理与化学热处理，钢的淬透性测试，钢的表面处理等。