片语

inner casing diameter套管内径

inner minor diameter内小径

inner major diameter内大径

inner out diameter内径

inner throat diameter卤根喉径

inradius内接圆半径；[数] 内径

Inner film diameter膜卷内径

bearing inner race diameter轴承内直径

inside diameter[数] 内径

Innendurchmesser inner-diameter在直径范围内

inner canthic diameter内眦间距

英汉例句

• The changing rate of the inner diameter of brachial artery after reactive hyperemia and that after held nitroglycerin in mouth were detected with high resolution ultrasound.

  采用高分辨率超声测反应性充血肱动脉内径变化率和含硝酸甘油后肱动脉内径变化率。

• The method has the advantages of fast speed, high accuracy, good timeliness and various faults on inner surface and inner diameter of a steel tube can be effectively inspected.

  该方法速度快，精度高，实时性好，可以有效地检测钢管内表面的各种缺陷及钢管内直径。

• The modified logging tool with 3arm caliper responds to changes of hole inner diameter by serial potentiometers.

  经过改进的三臂井径测井仪器用3条臂的电位器串联来响应井眼内径的变化。

• In the interference fit of assembled parts, inner diameter of sleeve-type parts was reduced and outer diameter of whole cover parts was increased by the magnitude of interference effects.

  在过盈配合中由于配合表面过盈量的影响，常使装配后的套筒类零件发生轴类零件内径减小和孔套类零件外径增大。

• The geometric configuration of the vascular prostheses was characterization with the relaxed inner diameter and the wall thickness.

  人造血管的壁厚和松弛内径是其主要的几何特征参数。

• An inner diameter vane shroud of a variable vane assembly accommodates a synchronization mechanism for coordinating rotation of an array of variable vanes.

  一种可变叶片组件，它的内径叶片围带容纳一个用来协调可变叶片阵列的转动的同步机构。

• It shows that the inner diameter of workpiece will enlarge in deformation process because of metal flowing on tangential direction in deformation area.

  研究表明，成形过程中工件的内径将会增大，其原因是变形区的金属产生了切向流动所致；

• Meanwhile, surge shaft is an underground structure because its body is buried by surrounding rock, and the excavation of cavern with big inner diameter will influence stability of surrounding rock.

  同时调压井埋于地下，属地下结构，大内径洞室的开挖关系到围巖的稳定。

• Results The rate of the carotid atheromatous plaque of CI group was 78.75%, the IMT and inner diameter of CCA of CI group were significantly different from control group(P

  结果脑梗死组颈动脉粥样硬化斑块检出率（78.75%）、CCA内径及IMT与对照组比较，差异有统计学意义（P

• A new method for inspecting inner diameter and inner surface quality of a steel tube is proposed.

  提出了一种新的检测钢管内直径及内表面质量的方法。

• Discoloration of the enamel, primer, or chrome or evidence of cadmium damage on the inner diameter of the axle may require the heat-damaged component be removed from service.

  如果轴的内径上的珐瑯、底漆、镀铬层退色或镀镉层损伤，应当在部件投入使用之前拆下热损部件。

• The main technical problem was bearing inner diameter profile grinding, during processing new product YA2, so that the diamond contact roller adjuster was designed.

  新产品YA2轴承加工中的主要技术难点是轴承内径成形磨削，为此设计了金刚石滚轮修整装置。

• The inner diameter part of the flange at one port of one end of the inner cylinder is provided with a rabbet for splicing with a flange without a rabbet at a corresponding end of an adjacent elbow.

  内筒的一端端口法兰内径处设有止口，用于与相邻筒节的对应端无止口法兰插接。

• The measuring values of TEE and TTE to inner diameter of ascending aorta were similar(P>0.05).

  TEE和TTE对升主动脉内径的测值无显着性差异（P＞0．05）；

• The second orifice has an inner diameter larger than that of the first orifice.

  第二个孔内径有一个比第一口大。

• With a larger diameter, thinner wall, and clear inner diameter (ID) the TDB are used as tube heaters.

  TDB作为管状发热器，有着更大的直径，更薄的管壁和更清晰的内径。

• Caliper board depends on the diameter of pipe diameter, and the need to consider the design of pipe diameter changes, general for the minimum 95% of the pipe inner diameter theory.

  测径板的直径取决于所测管段的内径，并需考虑到该管段的变径设计，一般为所测管段最小理论内径的95%。

• Also the paper lists the factors mostly affecting the mass flow measurement consecutively as steam density, expandable coefficient, inner diameter and flow coefficient of the throttle element.

  指出对质量流量影响最大因素依次为蒸气密度、可膨胀系数、节流件内径及流量系数。

• Moreover, a backward side with respect to the pressing direction has a circular section and its diameter is substantially same as the inner diameter of the container.

  其加压方向后方侧的断面形状是圆形，其直径略等于成形用模体的内径。

• A new method to measure the inner diameter of bearings in cars and the overall scheme are given, and the corresponding test is carried out.

  提出了一种车辆轴承内径测量的新方法和总体方案，并进行了相应试验。