片语

stationary fit静配合；紧配合；固定配合

interference taper fit construction圆锥面过盈联接结构

interference-fit strengthen干涉配合强化

interference-fit strengthening干涉配合强化

interference&fit干扰，沖突；干涉

interference-fit fasteners干涉配合紧固件

Metric interference-fit thread stud bolts螺桿过盈配合螺纹

The interference-fit threads过盈配合螺纹

interference e fit过盈配合

英汉例句

• such optimization results can provide a theoretical basis for selecting the rational interference fit precision.

  分析结果可为选择链节合理的过盈配合精度提供理论依据。

• cylindrical bore bearing is usually installed with heat, reduce the use of interference fit bearing clearance, or achieving the purpose of pretension.

  圆柱孔轴承通常采用热装，利用过盈配合减小轴承游隙，或者达到预紧的目的。

• composite materials; interference—fit joint; fatigue test; interference fit level;

  机械制造；疲劳寿命；紧固系统；复合材料；干涉量；

• by means of the finite element method, the assessment of the contact pressure of interference fit and the static strength of wheelset is conducted.

  通过采用有限元方法对轮对过盈配合接触压力及静强度进行校核；

• in this paper, the finite element model for calculating interference fit stress is formed by using displacement continuous condition and equal value of force condition on the fitting faces.

  本文利用互相配合的弹性体配合表面上位移连续条件及力的等值条件建立了计算过盈应力的有限元模型。

• we can accurately pick out the interference fit we need by using the two choosing ways above mentioned comprehensively.

  通过上述两种选择方法的综合运用，能够準确合理地选择所需的过盈配合。

• the interference fit between various column casings and shaft is analyzed by using the virtual contact loading method, and concrete calculating method and program are presented.

  采用虚拟接触载荷法模拟分析各种柱筒与轴之间的过盈配合接触现象，提出了具体的计算方法与分析程序。

• the invention also relates to a method and a device for manufacturing the external thread of the sealing pipeline and a thread pair pipe fitting of a guide-type interference fit pipe.

  本发明还涉及密封管道外螺纹的制造方法、制造装置以及导入式过盈配合管螺纹副管件。

• interference fit is an economical and effective method for prolonging fatigue life of jointing structures.

  干涉配合是提高连接结构抗疲劳破坏能力的经济而有效的措施。

• an experimental study was conducted to measure residual stress distribution around cold-expanded fastener holes and interference stress distribution near interference fit fastener holes.

  本文就冷胀孔周残余应力分布的测量技术和干涉螺接孔周干涉应力分布的测量技术进行了实验研究。

• the pressure distribution on the surface of interference fit of retaining ring and rotor body is calculated by both finite element method and analytical method.

  本文采用有限元数值方法和理论解析方法，对护环与转子本体配合面上的压力分布做了分析计算。

• this paper deals with designed theory and method for interference fit between plastic shaft and plastic hub.

  陈述了塑料实芯轴与孔座间过盈连接的设计理论和方法。

• spindle is a key unit of the high-speed machine tool, while the interference fit between spindle and motor rotor is one of the most important factors influencing the performance of the spindle unit.

  主轴是高速机床的核心部件，机床主轴与电机转子间过盈配合特性是影响主轴性能的重要因素。

• a reliability analysis method on the fatigue lives of interference fit or coldworking strengthened parts is presented.

  提出了一种处理钉孔挤压强化或干涉配合强化后元件疲劳寿命的可靠性分析方法。

• these formulas contribute to design the interference fit for the high speed spindle, improve the kinematical performance and the machining performance of the spindle.

  上述公式的推导有助于高速主轴过盈联结的设计，提高主轴的运动特性和加工特性。

• the locknut torque needed to move the washer at the maximum washer interference fit shall not exceed the torques given in table 3.

  锁紧螺母扭矩压紧垫片时，其与垫片的最大相互作用力不能超过表3所给扭矩值。

• for a high speed motorized spindle, the interference fit between the shaft and bearing has a great influence on the stiffness, rotary accuracy and life of the spindle.

  高速电主轴轴承与转轴配合的过盈量大小对主轴的刚度、旋转精度和使用寿命具有十分重要的影响。

• the rotor shall have an interference fit to the shaft and the rotating assembly shall be dynamically balanced to iso 1940, g. 6.3.

  定子应该通过压配合与轴结合在一起，旋转总装动态平衡应该符合iso1940，g.6.3标準。

• a new method to calculate and choose the interference fit is introduced.

  提出一种计算和选择过盈配合的新方法。

• in this paper, we give an analysis for friction—free interference fit bolt using the finite element method.

  本文采用有限元素方法在螺纹面无摩擦力的条件下对过盈配合的螺栓、螺母进行了分析计算。

• the interference fit between the gate and seat provides bubble tight shutoff even under the lowest pressure.

  即使在最低的管线压力下，闸板与阀座之间的配合也能够实现气泡级密封功能。