片语

melt-index temperature熔体指数温度

melt flow index熔融指数；[化学] 熔体流动指数

Melt index prediction熔融指数预报

high melt flow index高熔体流动指数

Melt Flow Index tester熔体流动速率仪

MI melt flow index融溶流动指数

Melt Flow Index熔融指数；[化学] 熔体流动指数

melt flow index test熔融流动指数试验

Polypropylene Melt Index聚丙烯熔融指数

Melt index instrument熔体指数仪

英汉例句

• the results show that the grafting ratio will increase when the content of dcp and mah increase, but the melt index will decrease in the same time.

  结果表明，接枝率随着马来酸酐、引发剂用量的增加而增加，熔体流动速率随着引发剂用量的增加而减少。

• the relationship between pp melt index and pp filament tenacity is discussed. the filaments are obtained the one-step equipment of producing high tenacity pp filament which made by fare co.

  在意大利fare公司卧式一步法丙纶高强丝设备上，研究了聚丙烯熔融指数与丙纶高强丝强度的关系。

• by blending plastic grade pp chips and far-infrared matrices, the far-infrared special raw material with high melt index was prepared for high speed spinning.

  采用塑料级聚丙烯切片与远红外母粒共混改性造粒，制咸高熔融指数的远红外高速纺专用料进行纺丝。

• the melt index inferential model's structure was derived from first principle method, while the model unknown parameters were validated by process data.

  考虑到双环管的串联结构形式，给出模型未知参数的调整规则，并利用现场操作数据估计模型参数。

• with pp chips and antibacterial matrices blent, the antibacterial special raw material with high melt index is prepared for speed spinning.

  采用聚丙烯切片、抗菌母粒共混，制成高熔融指数的抗菌高速纺专用料进行纺丝。

• this article pointed out and analyzed the problems existed in the process for producing high melt index (mi) polypropylene (pp) pellets by primary - degradation production method.

  针对间歇式液相小本体聚丙烯装置的生产特点 ，根据生产实际经验 ，对如何控制聚丙烯粉料熔体指数进行分析 ，总结出一些有效的控制措施。

• the new resins were characterized by useful properties in impact, tear, adhesion, sealing, extruder motor loads and pressures at comparable melt index values, and neck-in and draw-down.

  新的树脂具有这样的特征：在相当的熔体指数值和向内弯 曲以及拉伸下，其在沖击、撕裂、粘合、密封、压出机马达负荷和压 力方面具有有用的特性。

• it investigated the influences of the contents of eva and glycerol, and the lubricant to the mechanical properties, melt index and water resistance of the tps/eva blends.

  探讨了eva、甘油的含量和润滑剂对t ps/eva共混体系的力学性能、熔融流动性以及耐水性的影响。

• the melt index and ethylene content of clear pp resin for beverage bottles at home and abroad were analyzed.

  剖析了国内外饮料瓶用透明聚丙烯熔体指数，乙烯含量。

• the melt index (mi), heat distorsion temperature (hdt), solvent resistance, thermal stability, mechanical properties and fracture morphologies were presented.

  并对其熔融指数（mi）、热变形温度（hdt）、抗溶剂性、热稳定性、力学性能和破坏形态进行了研究。

• the influences of substrates, melt index (mi) and vac content in eva, selection and add-on of peeling force stabilizers on the properties of projective film products are studied.

  研究了基材、eva中熔融指数和醋酸乙烯含最、剥离力稳定剂的选择及用量对保护膜产品性能的影响。

• finally, the relations between process variables and quality variables were analyzed by on line predicting of melt index and density.

  最后运用所建立的模型进行流化床乙烯气相聚合过程操作条件的模型预测分析。