英语释义

1. occurring along or operating in more than one axis
concrete subjected to multiaxial stress the shoulder's multiaxial ball-and-socket joint

片语

multiaxial performance多轴性能

multiaxial weaving多向织造

multiaxial joint多轴关节

multiaxial deformation多轴变形

multiaxial assessment多轴评估法

multiaxial stretching多轴拉伸

multiaxial strain多向应变

multiaxial strength多轴向强度

multiaxial type多轴型

英汉例句

• investigation of the creep of p91 steel under high temperature, based on the uniaxial and multiaxial creep data, were carried through by ansys.

  根据单轴及多轴实验数据，运用ansys有限元方法，对高温p91钢蠕变进行研究。

• with a simple form, the criterion can reflect the concrete strength precisely not only under uniaxial stresses but also under multiaxial stresses.

  该準则的特点是：形式简单，不仅能正确反映混凝土单轴应力状态下的强度，而且能很好地反映多轴应力状态下混凝土的强度。

• conclusion multiaxial spot film is an effective tool to diagnose the occult rib fracture.

  结论多轴位点片是诊断隐匿性肋骨骨折的有效工具。

• discuss experimental techniques of concrete under multiaxial fatigue load, and carry out uniaxial fluctuating compression fatigue experiments of concrete specimens;

  探讨了混凝土多轴疲劳实验枝术，进行了混凝土单轴受压疲劳实验；

• the special features and applications of warp-knitted biaxial and multiaxial reinforcement sturctures are described .

  描述了双轴向和多轴向加固经编织物特点和应用。

• this article introduces the characteristics and application of warp-knitted geotextiles that lacework, reversibles, biaxial and multiaxial compound fabric.

  本文简介经编网眼织物、双面织物、双轴向和多轴向复合织物土工布的特点和应用。

• based on this background, focusing on introducing structures, properties, productions and applications of the multiaxial warp composite materials. their development of future is also described.

  本文在此背景下，重点介绍了多轴向经编复合材料的结构性能特点、生产和应用现状，以及其未来发展方向。

• this paper carried out a study on the problems of partial stress strain method under multiaxial loading and of how is this method be employed in high cycle fatique.

  对多轴载荷下的局部应力应变法，以及局部应力应变法如何应用于高周疲劳的问题进行了研究。

• third, a series of multiaxial fatigue tests were carried out on mts858 material test system for notched specimens.

  再用缺口件代替实际的螺纹接头在mts858试验机上进行了一系列拉—扭多轴疲劳试验。

• the time-dependent ratcheting behavior of ss304 stainless steel was experimental studied at room temperature under non-proportionally multiaxial cyclic loading.

  在室温下，对ss304不锈钢非比例多轴循环加载下的时相关棘轮行为进行了实验研究。

• the results showed that most multiaxial fatigue cracks were initiated and propagated along the direction of maximum shear plane or on the direction perpendicular to the tubular specimen's axis.

  研究表明，多轴疲劳裂纹主要是沿最大剪切平面或垂直于管形试样的轴线方向扩展。

• it is shown by multiaxial fatigue experimental verification that the proposed multiaxial fatigue damage parameter can be used for multiaxial fatigue life prediction of notched specimens.

  经多轴疲劳试验验证表明，所建立的多轴疲劳损伤模型可以较好地预测比例与非比例加载下缺口件的多轴疲劳寿命。

• a method is outlined for making low cycle fatigue life prediction for engineering components subject to multiaxial loading.

  介绍了一种预测受多轴交变载荷工程构件的低周疲劳寿命的方法。

• it is proved by calculation that the model can describe well the performance of concrete under uniaxial and multiaxial monotonic loading and fatigue loading.

  计算结果表明，该模型能较好地描述混凝土在单轴及多轴单调加载和疲劳加载下的性质。

• in these complicated structures, the appropriate design and analysis depend on the constitutive relations and failure criteria under multiaxial stress states.

  对于这些复杂结构，正确的分析和合理的设计又必须依赖于混凝土多轴受力状态下的本构关系和破坏準则。

• chapter 2: discuss experimental techniques of concrete under multiaxial fatigue load, carry out concrete uniaxial fluctuating compression fatigue experiments and analyze the experiment results.

  第二章介绍混凝土多轴疲劳实验技术，进行了混凝土单轴受压疲劳实验，并对实验结果进行了理论分析。

• in this paper, the stress-strain analysis and life prediction for the notched shafts were studied under multiaxial constant amplitude proportional loading.

  本文针对多轴比例恒幅加载情况下的缺口件进行了应力应变分析和寿命预测研究。

• the authors present a novel technique of atlantoaxial fixation using multiaxial c-1 posterior arch screws.

  作者描述了使用多轴c-1后弓螺钉固定寰枢椎这一较新颖的技术。

• based on the new developing multiaxial fatigue damage theory, current work was aimed at a robust approach to predicting fatigue life from crack initiation to final fracture.

  本文是基于最新发展的多轴疲劳损伤理论，建立了一种适用于各种载荷条件下的疲劳启裂和裂纹扩展的普适方法。

• at the same time, the concrete nonlinear constitutive relation and multiaxial intensity criterion are adopted.

  同时，引人了混凝土非线性本构关系和多轴强度準则。

• the iterative formulas of elastoplastic stochastic finite element method (sfem) under cyclic loading are deduced and the random responses of local multiaxial stress and strain are calculated.

  推导了交变载荷下弹塑性随机有限元的迭代格式，计算了局部多轴应力应变的随机响应。

• experimental study on multiaxial failure criterion of concrete before and after wet-screened is just at the initial stages.

  混凝土湿筛前后的多轴破坏準则的研究，目前尚处于初步阶段。

• experimental study on multiaxial characteristic of air-entraining concrete after freeze-thaw cycling is just in the initial stages.

  冻融条件下引气混凝土的多轴力学性能研究，目前尚处于初步阶段。

• in view of the anisotropic damage characteristics of concrete under multiaxial stress state, an anisotropic elastoplastic damage model is presented.

  针对混凝土多轴应力状态下各向异性损伤的特点，建立了各向异性弹塑性损伤模型。

• chapter 2 is devoted to presentation of multiaxial fatigue experiment system for concrete.

  第二章介绍了混凝土多轴疲劳试验系统的组成；