英语释义

• affectionate play (or foreplay without contact with the genital organs)

• the molding at the top of a column

片语

necking impression卡细模膛

neck ring项圈，[机] 颈环

stiff neck脖子发僵，[医] 斜颈；顽固之人

necking technique缩颈法

welding neck flange[机] 对焊法兰

neck of the woods附近一带（一般指乡村地区）

necking tool切槽工具

necking stage颈缩阶段

ablation necking烧蚀颈缩

necking d收缩

Pile necking桩身缩径

roll neck辊颈

necking spinning缩旋

neck and cropad 干脆；彻底地

shaft neck轴颈

axle neck轴颈

neck down收缩…使成颈状

pain in the neck极讨厌的人或事

neck and neck并驾齐驱，不分上下

by a neck差一点输胜

welding neck对焊

necking g颈缩加工

bottle neck瓶颈

英汉例句

• dancing around in a circle, necking jammy donut cocktails and becoming disproportionately irate about the music – so the whispers have it – of phil collins.

  绕成一圈跳舞，喝jammydonut鸡尾酒，对播放的音乐生气过了火（那是菲尔·考林斯philcollins的音乐）——至少是流言这么说。

• the elastic range, the plastic range (during which the material flows at a constant stress), the strain-hardening range, and the range during which necking occurs, terminating in fracture.

  弹性范围，塑料范围（当材料以不变的应力流动时），应变硬化范围和发生颈缩现象以其断裂终止的范围。

• the novel necking and curling combination machine is a kind of combination equipment for can_body forming.

  缩颈翻边组合机是对马口铁空罐罐身的一端或两端进行缩颈与翻边的一种组合设备。

• wind: typically, this results from your diet and lifestyle – overdoing the fruit and fibre, gobbling your food too fast, necking fizzy drinks and chewing gum or pen tops.

  肠胃气胀：通常，这是由饮食和生活方式引起的——食用了过多的水果和纤维、吃东西过快、喝了太多汽水、嚼口香糖或啃笔帽。

• so this paper will discuss the effect of defects on necking and stability of tensile deformation, which will help up to understand and master superplastic tensile deformation correctly.

  研究讨论缺陷对于拉伸变形的颈缩、稳定性的作用，这有利于正确理解和掌握超塑性拉伸变形过程。

• according the structure characteristics of oil filling pipe, combining production experience, designed expanding and necking die.

  针对加油管的结构特点，结合企业生产经验，给出了连续扩口、缩口模设计方案。

• at the same time, some mechnical phenomena at necking stage are concisely described.

  同时，对颈缩阶段中有关力学现象进行了简要的描述。

• the approach is based on the assumption that necking mode can be modeled under plane stress conditions and shear localization can be modeled under plane strain conditions.

  这种方法是以一种假设为基础的，即可以在平面应力条件下仿照缩颈模式和在平面应变条件下仿照剪切定位，材料是用弹、粘塑性物质构成的仿制品。

• the spinning forming of flange for stainless steel pan, including two process method namely necking and bulge flange, is introduced.

  介绍了不锈钢锅盖凸缘的旋压成型，主要有缩口及胀凸缘两种工艺方法。

• the necking parameters such as the discharging voltage, electric capacity etc was adjusted, and the optimal technical was found.

  对缩管的放电电压、电容等参数进行调节，得出了优化的封接工艺。

• 「housewife」 recalls too strongly the wasp-waisted 1950s figure outwardly thrilling to the latest advances in domestic technology while necking tranquillisers to dull the pain of frustrated ambition.

  「家庭主妇」听起来太容易让人想到20世纪50年代蜂腰美女的形象，对外为国内技术的最新进步而激动，对内却吃着镇静药来缓解雄心受挫的痛苦。

• the retained austenite transformation prior to the necking of the example enhanced the uniform elongation rate.

  分析认为：残余奥氏体在颈缩发生前的较完全转变有利于提高均匀延伸率；

• the forming technique by spinning for the necking parts of zircalloy-4 guide tubes for nuclear reactors is described.

  本文阐述核反应堆用锆-4合金导向管缩径段的旋压成型工艺。

• the deformation characteristic of the flame pipe necking was analyzed.

  分析了火焰管缩口的变形特点。

• the backlight photography with single sample was used to measure the true stress-strain of the ductile material after necking in tensile test.

  本文采用单试样逆光拍照法对延性材料拉伸试验缩颈后的真实应力-应变进行了有效的测量。

• few drinkers might want to be seen in public necking such downmarket stuff, but in the privacy of their own homes, who can tell the difference, especially after five or six?

  恐怕没有饮酒者愿意在公共场合被看见自己钟情于低端市场，但是对于他们自己家中的隐私，特别是五点或六点钟后，谁敢说各家的情况有所不同呢？

• the plastic instability, i. e. multiple necking fracture before the fragmentation was fundamentally analyzed, and the fragments distribution was obtained from the energy balance theory.

  对无氧铜在破碎前出现塑性失稳——多重颈缩进行了初步分析，利用能量平衡的破碎理论给出了无氧铜环的破碎分布。

• aim to study the necessary condition for the occurrence of an internal necking in microvoids in perfectly plastic materials.

  目的研究理想塑性材料中微孔洞间产生内颈缩的必要条件；

• analysis of contraction ratio of section and external shape of localized necking zone was proposed based non-local gradient plasticity theory.

  采用非局部的梯度塑性理论，得到了断面收缩率及颈缩区内部不同位置直径的解析解。

• the basic thought, the action principle and hydraulic system on half- automatic machine design for flaring and necking tube head are introduced briefly.

  对管端扩、缩径半自动专机的设计基本思路、动作原理、液压系统进行了简要介绍。

• necking and cleavage cracking are discussed in terms of prior concepts.

  并以前面所学的观念探讨颈缩及劈裂破坏。