英语释义

• a homogeneous solid that can exist over a range of component chemicals; a constituent of alloys that is formed when atoms of an element are incorporated into the crystals of a metal

片语

solid-solution system固溶体系

From Solid To Solution从固体到溶液

mischcrystal固溶体；混晶

solid-solution minerals固溶体矿物

solid state solution固相法

Solid-solution crystal固溶晶体

solid-solution treatments固溶处理

solid-solution mineral固溶体矿物

sosoloid固态溶液；固溶体

solid-solution ratio固溶率

layed solid-solution层状固溶体

英汉例句

• in this thesis, the research and development of hydrogen storage alloys with bcc vanadium-based solid solution were reviewed first.

  本文首先对国内外bcc固溶体型储氢合金的研究进展进行了全面综述。

• a method for making monophasic solid solution of copper and manganese by powder metallurgy process is presented. the sintering characters of green compact of copper and manganese powder are studied.

  提出了用粉末冶金法制备铜锰固溶体的方法，研究了铜锰粉末压坯的烧结特性。

• when the microstructure of the brazing seam is in the form of pure solid solution , there is a big increase in remelting temperature of the brazing seam .

  当通过扩散使钎缝组织变成纯固溶体时，钎缝的重熔温度将大幅度提高。

• cu exists in the implantation layer as solid solution after stainless steel implanted by cu ions.

  铜离子注入不锈钢表面后，铜以固溶形式存在注入层中；

• after solid solution treatment under various temperature, the amount, size, morphology and distribution of precipitated particles are different after long time aging at 750℃.

  不同固溶温度处理后，在750℃长时时效后的层状析出量、析出大小、形态、分布也不同。

• a solid solution of ferric carbide or carbon in iron; cools to form pearlite or martensite .

  含铁碳化物或含碳铁的固体溶体，冷却可形成珠光体或马氏体。

• the affecting factors on interface diffusion and migration of cu and ni powders have been investigated during the process of cu ni solid solution which be formed by reaction of cu and ni powders.

  研究了在铜粉和镍粉反应形成固溶体组织的过程中，影响铜粉和镍粉界面扩散和迁移的因素。

• effect of solid solution and aging treatment on microstructure and properties of high-aluminum bronze is studied by using optical microscope, sem, xrd and mechanical property testing.

  采用光学显微镜、扫描电镜、x射线衍射分析和力学性能测试等方法研究了固溶时效对高铝青铜组织与性能的影响。

• the results show that the microstructure of brazing filler metal is mostly solid solution phase.

  结果表明，钎料区主要是固溶体组织；

• the influence of different solid solution treatment on the structure and corrosion resistant property of cast duplex stainless steel was investigated.

  研究了不同固溶处理对双相铸造不锈钢的组织及其耐蚀性能的影响。

• the brief mechanisms of mechanical alloying are reviewed. the mechanisms of preparing amorphous, nanocrystalline and supersaturated solid solution materials are also reviewed.

  阐述了机械合金化的基本原理， 金属粉末机械合金化形成非晶、纳米晶和超饱和固溶体的基本机理。

• different synthesis methods were compared and the trends in optimizing the performance and structure of ceria-zirconia solid solution were outlined.

  指出铈锆固溶体结构性能进行优化的方法以及改进、发展的方向。

• from the xrd patterns of ma-treated powders, amorphous phases, nanocrystalline phases and/or metastable solid solution phases were observed in as-milled alloys.

  粉末x射线衍射结果显示，所制备合金中包含非晶、纳米晶、过饱和固溶体等亚稳态的结构。

• in addition, the metal body within welding heat effect zone will produce a lot of micro-cracks because of infiltration of solid solution nitrogen in course of porcelain spraying.

  此外，喷瓷管道焊接热影响区的金属基体将由于喷瓷过程中渗入的固溶氮而产生大量微裂纹。

• during sss, defects arise, diffuse and interact and solid solution forms due to the diffusion of pores and contact between particles, making the alloy mostly densified.

  在固相烧结时，发生孔隙扩散、颗粒接触而引起缺陷增生与扩散、缺陷的相互作用以及合金固溶体的形成，已使合金产生大部分致密化。

• a solid solution wherein the solute atoms replace or substitute for the host atoms.

  溶质原子取代或代替溶剂原子而形成的固溶体。

• with establishment of the limit solubilities of fe in al at different temperatures, the solid solution and precipitation heat treatment are proposed for strengthening cube texture.

  并在确立了低浓度铁在铝中溶解度曲线的基础上，提出了溶析热处理强化立方织构的技术。

• the prepared alloy appears the alternant structure with the pb-based solid solution and the pb-sn eutectic.

  制备的合金呈现出铅固溶体和铅锡共晶交替排列的结构。

• the growth conditions and synthetic methods for calcite, aragonite and vaterite and its solid solution have been evaluated.

  评述了方解石、霞石和球霞石及其固溶体的生成条件和合成方法；